Video není dostupné.
Omlouváme se.
How to fix Moen no cold water issue
Vložit
- čas přidán 8. 09. 2023
- Hey all, i had a single handle Moen shower stop giving me cold water, nothing but hot, hot water throughout the entire range, bought a new cartridge part #1222 for +$50 at Home Depot only to have the same symptoms. Here i show you in this video how to turn the valve upside down and restore your cold water, hope this helps! enjoy!
*I FORGOT TO MENTION PLEASE TURN OFF YOUR WATER AT THE WATER METER OR MAIN WATER SUPPLY BEFORE ATTEMPTING THIS*
Thank you SO much bro!!!!!! My shower went from warm to scalding hot. I flipped the cartridge like you said and that took care of our problem. 👍🏼🙋🏽♂️
@@carlosmillan Awsome glad it worked man! I still can't figure the issue out but it works for now!
Thank you for your video. Just one comment. It would've been helpful to know that the main water valve needed to be turned off before removing the cartridge.
@@eportillo12 for sure, sorry! I did forget to mention you'd have to turn your water off at the meter or the main water line running to the house, its a live line, my apologies!
😂
@@michaelmartinez4515 that’s funny
Lmaoooooooooo
😂😂😂 Some people obviously shouldn’t be trying to work on their own stuff. The lack of common sense in people is baffling to me. “
“Remove the shower valve…”
“Wow!!! I didn’t know there’d be water pressure bind my water VALVE!?” 😂😂😂😂😂 These people… PLEASE PLEASE PLEASE shoot video if you work on anything electrical!!😂😅
Hi thank you! I'm having the same issue and I had to do that also.
Thank you... mysteriously... it works..
the internal balancing spool that a 1222 has musta fail? whereas the 1225 balancing spool is not part of the cartridge but is built into the valve body hence the cheaper price since it's two separate units unlike the 1222 cartridge cost is twice as much because the balancing spool is in the 1222 cartridge...you should hear the spool move back and forth when you rattle the 1222 cartridge, telling you it's not stuck
I cannot get the cartridge out for the life of me. Pin removed pulling on it with pliers or Chanel locks and cannot get it out. Any advice?
Try some hand soap to lubricate it
i have the same situation! i replaced the cartridge and it got i little bit better but still not cold enough!!!!!!
I've got the same issue. I even bought a whole new one and replaced the entire thing. no change. cold water drips. removed the valve and i've got plenty of pressue from both H and C but valve back in no cold. i've been in contact with MOEN and THEY ARE NO HELP!!!! FK MOEN! I WILL NEVER BUY THIS TRASH AGAIN!
один из лучших каналов по теме
Thank you! 🤝