Knife Making - Small SKINNER w/ Black Blade and Stabilized Wood Handle
Vložit
- čas přidán 21. 08. 2024
- This time we've made a small skinning knife :)
Let us know in a comment what knife you'd like us to make next!
Buy our knives at:
www.barbershop...
Our knifemaking jig:
www.barbershop...
FB: / barbershopcustoms
INSTAGRAM: / barbershop_customs
SHOP: www.barbershop...
REDDIT: / barbershop_blades
IMGUR: imgur.com/user...
EMAIL: info@barbershop-customs.pl
Blackening the steel:
A mixture of caustic soda (700g), potasium saltpeter (250g) and water (1,2 l)
The temperature of the solution should be kept between 120 - 140 C.
I keep the knife inside for about 30 minutes to get consistent black colour, you can manipulate the time to achieve different results, shorter period should give you dark brown or purple - ish colour.
Be careful - this mixture is highly corrosive!
Heat treatment:
-Austenizing temperature: 830 C
-Tempering: 180 C
Specs:
Stingray
Steel: 80CrV2 3.1 mm
Length: 200 mm
Blade width: 45 mm
Blade length: 95 mm
Handle: Stabilized wood burl, Brass pins
Weight: 150 g
“We are like islands in the sea, separate on the surface but connected in the deep.” ~ William James
#knifemaking #hunting #knives
Very inspiring! Beautiful work
Fantastic knife. Excellent video.
Wow, I am just learning how to make some skinning knives for my friends who hunt. Can I say I love the final outcome, it's amazing and also your editing skills are awesome and so informative.I think I will be watching this a lot. Cheers 👍
Fine piece of craftsmanship!
Thank you
Материал рукояти раскрыт по королевски ! Работа добротно сделана. Спасибо. Сибирь. Красноярск.
Beautiful knife.
🇧🇷 BR aqui apoiando seu canal, ótimo vídeos do canal parabéns!
For the record I now nothing about making knives and fitting handles except what I've seen on CZcams. What I have noticed and if you are so inclined I see many of the knife makes will form the handle at the bolster before attaching it to the knife to prevent them from scratching the blade while forming the handle. Use it don't use it. Just an observation. Great design and I enjoy watching you make them!
It's actually easy to avoid scratches if you pay attention and the way we do it guarantees a better fit, especially on a wood that likes to slightly deform if it's not oiled right after sanding :)
For 30 seconds you had me. I was thinking “I’ll do that!”..
Then the waterjet came into it...
The waterjet isn't necessary though
Barbershop Customs Just as well! 🤣
You could also use a bandsaw, angle grinder, or even a hacksaw
Классная работа мастеру респект!!!!!
You make really beautiful knifes I know I’ve asked before but I’d like to see knife sheaths in your build PLEASE
So beautiful 😍
Another top class knife! I’m always jealous of your handles and how they shine after you polish them! What polish do you use?
Thanks, it's a fine car polishing paste
Love these videos. Great music beautiful knives...very creative and relaxing. And I'm hard to please.
First off I love that your wear g a knife while making a knife! I just saw your grind deflector plate on your grinder for the first time, that's awesome! And that wood just ok to on fire when you finished it! Great work man! Cheers
Beautiful knife, unfortunately the music was a bit much. But saying that loved what you created, really talented.
wow very nice knife.i like watching knife making .then i go to my wrok shop and try mine not as nice, but it keeps me going and alive thank you so much for your skils...w.smith one day i will
Thank you, good luck on your knifemaking journey 😊 🤙
Amazing..
Great job making a beautiful knife! I love the burl scales
Enjoyed your video and gave it a Thumbs Up
MAGNIFIQUE 🤘🤘🤘
Merci
awesome.
Thanks for sharing this video.
Super Knife fantastic Job 👍👍👍
Thanks 😊 🤙
สวัสดี ครับ 😍😍😍
Awesome informational educational video experience Y'alls God Bless Ya 🙏
Thanks a lot!
Beautiful my man
Thank you
Thanks for a nice and interesting video.👍👍
Nice and crisp
Thanks
Hello
Beautiful knife !!!
I love your work.
Could you tell me what is the substance you apply to the blade at 16.19?
And can you tell me why?
Thank you
Very nice vid, Thanks
I love your work. Just found your channel. Keep up the great work 👍👍
Thank you!
@@BarbershopCustoms Could you tell me about the dark substance you apply in the blade in around 3minuts?
Beautiful work as usual 👍👍💪
Thank you
@@BarbershopCustoms waiting for new knives 😊
Ooo genio genio
👍👍👍
I could tell from the music that this was going to work out in the end.
Right choice of music is important
Hello. Love ur craftmanship. Do you have the scetshes to male the knife and what type of wood are u using for the handle ?
superb
Que lindo trabalho quanto mais um escrito 🔪
Красавец
Love your channel, have you designed and made any flipper folders?
Wow , wow wat a knife. Can you please tell me what's the black paste that you have used on the blade before the heat threat and what was the " boiling " process in that pot . Thank you. I'm watching your videos with pleasure.
Thanks, the paste is an anti decarb paste and the oxidizing solution is in the description
That's my next project
All I can say is fucking beautiful
Pozdrawiam.Fajna robota.Jak czarnisz nóż,co jest w garnku?
Good job :D
Thank you
Was this a one off? Didn’t see it on the website
Hi, how do you know how long to keep the Blade in the keln when applying your heat treat? Do you have a scale or is it something you pick up with experience 🤔 thank you.
Мои Вам овации 👏👏👏👏👏
Nice
Thanks
Showww !
Another great video and an awesome knife! After the blackening solution cools, can you save it? If so, what is an acceptable container? Thank you!
Yes, the solution is good till it works, we always reuse it a couple times. You can store it in the container that you cook it in, just make sure it's insulated. You can also use some stainless or plastic container
Very nice knife and good video. What kind of polishing cream do you use for the blade?
Thanks, it's a car polishing paste
Cześć. Sam zaczynam się trochę bawić w robienie noży, choć na razie głównie marnuję materiały ...właśnie mam na warsztacie bardzo podobny nożyk. Zaciekawił mnie ten czerwony papier ścierny którym wykańczasz ręcznie klingę. Mógłbyś zdradzić co to za model/marka?
Rhynowet redline ( najlepszy papier jaki dostaniesz )
Awesome job and beautiful knife as usual! Can you tell me what the melonkote paste is? And if there is something equivalent in the US?
It's an anti decarb paste, but I don't know if there's an equivalent in the US
How about dimension? Lenght..width.. thanks
What's stabilized wood??
Tempering, 180 degrees but how many times? 30 min *2 ?
1x 2h
@@BarbershopCustoms thx
Excuse me sir, what is that kind of grease that you apply on the sheet before the heat treatment? best regards
Its meloncote, something developed by a guy known here in the poland knifemakers world to be tempering expert, its precenting decarbonation of steel tempered up to 850deg C
Dobra knife kurwa!
What do you guys use for blackening? Can you share the recipe?
Thanks!
I was wondering the same thing
Hah, thanks, the recipe is in the description
What Is that Black material you used on the handle ?
Czemu używacie pasty do karoserii jako pasta do polerowania drewna? To działa?
Bo działa ;) Szybko i dobrze
Fantastic knives
How much are they? Price in £
This one is sold, the currently available knives are listed at:
www.barbershop-customs.pl
I don't get it. He has a freaking water jet CNC, but no band saw XD. Awesome knife tho !
Laurence Bérard-Mondou u can pay fir a water jet so that’s what they did
Priorities :D
Forging a skinner..
If you have 15k worth of equipment
is this knife for sale?
This one isn't, but we have a similar one available on our website:
www.barbershop-customs.com
Show us how to do this when we don't have the $1000's of dollars to invest in all those tools! 🤪
You could absolutely do it with an angle grinder and a 100 dollar harbour freight 1x30 belt sander.It would be a bit harder to do. You could also do it using a hacksaw and hand files along with a handmade filing jig. You will also need some sandpaper, epoxy resin to glue the handles, and about a 100 dollars worth of insulating firebricks with propane burners to heat treat the knife- if you will use a steel that's easy to heat treat (like 5160 or 8670)..... and practice. Quite a lot of practice to make it look that good.
I'm just starting myself. It's a lot of fun.
Cnc ....
What’s with the church music
The newest video is without any music, please let us know what you think :)
I think you ruin a good video with bg music, maybe it's just me but I think bg music does not improve a build video especially if it's a long one
We have released a video without any music a month ago :)
Awesome video trrible music. Had to mute
I watch these just for the music. With the 2 things I love together these are the most relaxing videos ever.