Fitted a cheap kit on two of my Golfs, just the cast part though, set it to shortest setting and it feels like that's how it should have been from factory.
Yeah Andrew, I thought the same. When comparing how far the throw of the gear stick used to be, it feels so much better! Appreciate you watching and taking the time to comment too , cheers 👍🏻
At the base of the gear lever or over the old rubber bushes attached to the short shifter? I've ordered new spring bushes to attach to the short shifter, as my ones are knackered 🙈
Currently I have an issue. This retaining clip @ 4:36, broke at mine (found out 5min ago). The pin went out of place and I could not change gear anymore.... Now I need one of these Metal retaining clips. I wonder where I can get these. I'm not getting a short shifter, just looked at the video to have some help to find my issue... This video was super helpful. But maybe you can help me to find the right retaining clip? ❤
I can't find the plastic bushing individually I'm afraid. Best bet is Autodoc, pop in your car's details and see what they offer in the ' transmission ' section. As for the clips, I found the part number I think online, but they are expensive. www.ebay.co.uk/itm/132907260788?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=yyqjsshvQx-&sssrc=4429486&ssuid=vCDiAaHLTtq&var=&widget_ver=artemis&media=COPY You may be better off just getting replaced parts from Autodoc that have the clips/bushes included as the whole assemblies aren't much more than the individual bits. Hope that helps 👍🏻
@@NorthCoastWorkshop thank you very much! I'll do that and order it. I need my car for commuting. Time to use the train now until I have the parts 😭😭 Edit: found the part number of the lever: 1K0711202F
@@NorthCoastWorkshop Do you think that plastic bushing is standard and required? Could just use only a retaining clip. Found one on internet just as you sent me for €3.50. (I live in the Netherlands)
Excellent how-to, thank you 👍👍 But the other metal bracket that replaces the black plastic one... is that necessary if the plastic one seems ok? Seems to be confusion online about what that smaller bracket does so on yours do you know if it helped reduce the throw at all? It's an extra £50 so I'd rather spend that on new bushings unless you think it's definitely worth the extra. Cheers✌️
Hey mate, thank you for commenting and glad u found the vid useful. It's always cringey when I watch back my older vids 😅🙈 Anyway I had a quick look to double check the plastic arm your talking about. I'm 99% sure that one controls the side to side movement of the gearstick, so it's not a necessity to replace. You can definitely run the setup with just shortening the front to back movement. And yes it's certainly expensive for just a small amount of reduced movement. Hope that helps 😊👍🏻
@@NorthCoastWorkshop It is side to side but except for neutral I can't see that making much difference. Think I'll give it a miss and just do the main part, cheers.
ciao, non ne sono troppo sicuro perché non l'ho mai fatto prima di me stesso. Penso che i proprietari utilizzino un anello di tenuta che è già sulla paratia, nella parte posteriore del motore, l'anello di tenuta viene utilizzato per il cablaggio e i proprietari spingono il tubo di pressione con il cablaggio dietro il cruscotto, quindi lo fanno scorrere fino all'indicatore. Mi dispiace non posso essere più di aiuto.
Where did you get tour sound proofing from under the bonnet ? Also how did you fit it. Mine has sagged and gone mouldy. I removed it but im looking to replace it. Thank you
Mine is still the original soundproofing from seat. I took it off a few years ago to wash it and dry it out to remove the mould, but only once I had sealed the holes from the plastic trim fitted to the bonnet (that's how it gets wet and mouldy) You could try the same with urs, with a damp cloth and then leave it flat, drying out in the sun for a day. Otherwise a seat dealership will be the place to try and source a new one 👍🏻
Usually places like eBay or Amazon sell aftermarket ones for £30-100 but original OEM ones are nearly twice that price I'm afraid . Just make sure you get one that's or the facelift models as they're a different shape 👍🏻
@@NorthCoastWorkshop i watch regardless mate 😊 always good to get another view on how things are done even tho I might of already done it. Every day is a skool day as they say and we’re always finding different ways to do things. Also gives the algorithm a jump start for others
To subscribe to my Free Monthly Car content Newsletter, and gain access to the Completed Job cards, click the link
▶ northcoastworkshop.com/freestuff
Awesome video man! Thanks for the shout out! (Rick) Enjoy your short shifts!
I will do, cheers Rick! 👍🏻
Fitted a cheap kit on two of my Golfs, just the cast part though, set it to shortest setting and it feels like that's how it should have been from factory.
Yeah Andrew, I thought the same. When comparing how far the throw of the gear stick used to be, it feels so much better! Appreciate you watching and taking the time to comment too , cheers 👍🏻
You should have put new metal shifter bushes in there aswell Kev 👍
At the base of the gear lever or over the old rubber bushes attached to the short shifter?
I've ordered new spring bushes to attach to the short shifter, as my ones are knackered 🙈
@@NorthCoastWorkshop the actual rubber bushes that slide over the pins. You can get metal ones and it makes it feel even tighter
Ah yeah I've seen those I think. Nice one, I'll get some ordered. I'm sure I saw some on darkside developments website. Cheers Brad, appreciated👍🏻
Great walkthrough mate! Don't suppose you know the part number for that clip that broke do you? 😅
I don't mate 😬🙈 guessing yours broke as well??
Do it for Rick!
Currently I have an issue. This retaining clip @ 4:36, broke at mine (found out 5min ago). The pin went out of place and I could not change gear anymore.... Now I need one of these Metal retaining clips. I wonder where I can get these. I'm not getting a short shifter, just looked at the video to have some help to find my issue...
This video was super helpful. But maybe you can help me to find the right retaining clip? ❤
I think I've also lost the plastic bushing from 07:35. Ughhh. Where to get these small items 😢
I can't find the plastic bushing individually I'm afraid. Best bet is Autodoc, pop in your car's details and see what they offer in the ' transmission ' section.
As for the clips, I found the part number I think online, but they are expensive.
www.ebay.co.uk/itm/132907260788?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=yyqjsshvQx-&sssrc=4429486&ssuid=vCDiAaHLTtq&var=&widget_ver=artemis&media=COPY
You may be better off just getting replaced parts from Autodoc that have the clips/bushes included as the whole assemblies aren't much more than the individual bits.
Hope that helps 👍🏻
@@NorthCoastWorkshop thank you very much! I'll do that and order it. I need my car for commuting. Time to use the train now until I have the parts 😭😭
Edit: found the part number of the lever: 1K0711202F
@@NorthCoastWorkshop Do you think that plastic bushing is standard and required? Could just use only a retaining clip. Found one on internet just as you sent me for €3.50. (I live in the Netherlands)
Worth a try. I'm not sure if it'd work as I still have the one for the kit I received.
Nice one buddy !
Cheers 😁👍🏻
Excellent how-to, thank you 👍👍
But the other metal bracket that replaces the black plastic one... is that necessary if the plastic one seems ok?
Seems to be confusion online about what that smaller bracket does so on yours do you know if it helped reduce the throw at all?
It's an extra £50 so I'd rather spend that on new bushings unless you think it's definitely worth the extra. Cheers✌️
Hey mate, thank you for commenting and glad u found the vid useful. It's always cringey when I watch back my older vids 😅🙈
Anyway I had a quick look to double check the plastic arm your talking about. I'm 99% sure that one controls the side to side movement of the gearstick, so it's not a necessity to replace. You can definitely run the setup with just shortening the front to back movement. And yes it's certainly expensive for just a small amount of reduced movement.
Hope that helps 😊👍🏻
@@NorthCoastWorkshop It is side to side but except for neutral I can't see that making much difference. Think I'll give it a miss and just do the main part, cheers.
Ciao devo fare passare dal vano motore il tubo per pressione turbo dentro abitacolo non riesco a trovare un passaggio come devo fare grazie ..
ciao, non ne sono troppo sicuro perché non l'ho mai fatto prima di me stesso. Penso che i proprietari utilizzino un anello di tenuta che è già sulla paratia, nella parte posteriore del motore, l'anello di tenuta viene utilizzato per il cablaggio e i proprietari spingono il tubo di pressione con il cablaggio dietro il cruscotto, quindi lo fanno scorrere fino all'indicatore. Mi dispiace non posso essere più di aiuto.
@@NorthCoastWorkshop grazie lo stesso provo a vedere se riesco a farlo passare 😎😎
Good video wish i could do this on my 1.6tdi but the part isn't near as cheap as that and takes the worth out of it tbh🤣
Maybe later on down the line you'll get ur hands on a cupra 🤞🏻 appreciate you watching David 😁👍🏻
I can’t find a 5 speed short shifter for my 1.6 tdi 🙁
@@Heha654 i don't actually know if they make them or not ive never found one that solidly says it's actually for a 1.6tdi 🤣
@@druss841 me neither 😂🤦♂️
Where did you get tour sound proofing from under the bonnet ? Also how did you fit it. Mine has sagged and gone mouldy. I removed it but im looking to replace it. Thank you
Mine is still the original soundproofing from seat. I took it off a few years ago to wash it and dry it out to remove the mould, but only once I had sealed the holes from the plastic trim fitted to the bonnet (that's how it gets wet and mouldy)
You could try the same with urs, with a damp cloth and then leave it flat, drying out in the sun for a day.
Otherwise a seat dealership will be the place to try and source a new one 👍🏻
Hi there i'm looking to buy a front grill for my cupra r same model like you have can you recomand a site where i can order one ,thank you a mill
Usually places like eBay or Amazon sell aftermarket ones for £30-100 but original OEM ones are nearly twice that price I'm afraid .
Just make sure you get one that's or the facelift models as they're a different shape 👍🏻
Another cracking video mate. Even tho i have dsg😂
That is a compliment if I'm getting the dsg gang tuning in 😂😂👍🏻
@@NorthCoastWorkshop i watch regardless mate 😊 always good to get another view on how things are done even tho I might of already done it. Every day is a skool day as they say and we’re always finding different ways to do things. Also gives the algorithm a jump start for others
Really appreciated mate 😊👍🏻 you 🐐😁
Do the gears feel notchier with this short shifter?
Yes a wee bit, it just feels like you've got to be more precise, but when driving it on a wee back road, and giving it some, it's great fun 👌🏻