UConnect 8.4 Delamination FIX!! - Dodge Chrysler Jeep
Vložit
- čas přidán 1. 06. 2021
- Sorry for my mouth non stop talking.. I have been told I talk to much so forgive me! I hope this video helps others learn something and most importantly save some 💰
Also the ending when I’m in the car I don’t know why the video started getting glitchy! Also when it looked like the audio button was pressed on its own it did not lol it was me touching it while swiping my hand around. This fix 100% worked with no reaming issues of ghost touching and or anything! It fixed the stereo 100%
Like, Share & Comment down below.. thanks guys! - Zábava
"101.1 -- THE ROCK STATION"
Cheers from a former Central Floridian. Thanks for saving me $1200 that the stealership said was the only option.
What a joke - known issue yet they don't have a defect to cover it. Hell mine was under warranty and was a lease and still they did nothing.
Absolutely I am happy I could help, and I’m really sorry I didn’t see this sooner! Hearing comments like yours is what makes making these videos worth it. Sending love back from the Sunshine State 🤙🏼
I just repaired the radio today in my Dodge Ram today without removing the radio from the vehicle. The easiest way to remove the digitizer from the display is to use a piece of fishing line. First remove the metal cover, and then you can start on the top left edge and gently work the fishing line down through the display slowing sawing through the glue. Just be careful at the bottom center of the digitizer as that is where the connection is. Use Isopropyl Alcohol to clean up the glue, which is by far the longest part of this process. After everything is cleaned up, I used some clear double sided gorilla tape around the edge of the digitizer and cut of any excess tape. Once all four sides are taped up, remove the protective coating on the tape and attach the digitizer to the screen.
Hoping you can help me understand what the purpose of the double sided gorilla tape is for? Seems like the black outer frame / casing would hold the digitizer in place. Let me know if that step is necessary as it is not mentioned in the original video. Thank you in advance!
I just finished removing goo on my Uconnect 8.4 on my 2018 Ram and thanks to you and a couple other great CZcams videos it appears to have worked, I have a functioning radio now. BIG THANK YUO. Took me around 4 hours. My RAM has a middle console so I needed to remove 3 screws to slightly move it out of the way to remove front panel to get to radio. Getting rid of goo was very troublesome, I used a mixed of Goo Gone combined with alcohol and then rubbed it in circular motions. I made sure to give it a final cleanup with alcohol only. Dealer had quoted me $1,200 approx.
THANK YOU for the explanation, I can't believe I had to search this long to find out what kind of solvent was used to clean the "goo" (sounds real scientific) from between the digitizer and the screen.
Did the repair this afternoon. Worked perfectly! You helped save me a ton of money, dude! Thank you very much!!!
My pleasure brother 🤙🏼
I’ve been holding out on fixing mine because I haven’t been able to justify to myself spending $1500 just for convenience but maaaaan I’m so pumped right now after watching your video! I thought I was a rarity with the ghost touching. Got so sick of my car calling people on it’s own…had my ex thinking I wanted to get back with her 😂😂, I had to disconnect all devices and couldn’t use it unless I plugged something in through the USB and then had to keep the screen on “controls”…nothing like having your heated seats turn on when it’s 100 degrees outside just so you can listen to some music lol.
Thanks for the video though, made my day!
Absolutely brother lol… yeah she was probably feeling her self to much after ur UConnect decided to give her a call several times 😂 even if you told her it wasn’t you she wouldn’t believe ya even know it’s the truth! Lol kidding but yeah man just be careful with the digit it’s a hella sensitive piece of shit lol I’ve had a few issues with mine since this fix but nothing crazy.. so much better now I can’t even begin to explain how much better it is now. I hope this helps you enjoy ur radio again and put that ex to bed for good 😁😉
Lmfaooooo your car had your ex feeling herself.
Thank you so much for this, man. My fiancé's Jeep Cherokee has been going absolutely nuts with the ghost touching to the point you had to just cut the screen off. No radio, no climate controls, nothing. I watched your videos and read just about every comment and got the nerve up to try this myself. Especially after researching radio replacement and/or repairing costs, it was a no brainer to give it shot.
It was a long, tedious process but as long as you take your time, it can be done. The digitizer and screen were both covered in the glue so I had to clean both. I used double sided Gorilla tape cut in thin strips to "replace" the glue around the digitizer. I could probably replace to digitizer just because it has a bit of a hazy look to it now and I rubbed a little too hard on one portion of the screen so it looks a little red when it is turned off. But when the unit is on, the hazy digitizer and the red portion of the screen are hardly noticeable. It's been over two weeks since I repaired it and have not had any problems at all.
You have not only saved me quite a bit of money but possibly saved my relationship as we had a five hour drive together in her Jeep just a couple days following the repair! It has worked flawlessly since.
Thanks again and have a merry Christmas!
If I could give you a hug I would. I’m very thankful to hear such kind words from you, hearing that this worked for you only makes me happier. Don’t worry about the hazy digitizer mine is the same, it was noticeable at first but overtime I can’t even tell anymore. Merry Christmas to you guys and happy new year from the The Hands On Gang 🤙🏼
Hey man when using the double sided gorilla tape is there a noticeable gap? When placing the parts back is it easy to “tap” or do you have to press hard a bit if there’s a gap between the digitizer and the screen with the double sided gorilla tape?
@@ManchesterUtdFan There is a gap but it's not too much larger than the original one created by the glue. The touch screen works just as it did before, no hard pressing needed.
@@ManchesterUtdFan yes there is, even know my response is ancient to this comment there is a gap, that’s where the glue that you remove sits. Sorry for the late reply brother!
Thanks man, with the help from you and another CZcamsr I fixed mines for the cost of double sided gorilla tape 👍🏾👍🏾👍🏾
My so has a 2018 Ram 1500 and the same thing started happening with his radio. Ghosting all over the place and acting it was having a seizure. I found your video last night and we took the radio out this afternoon and cleaned all the glue from the screen and digitizer just as you mentioned and that fixed the problem. The radio is working just fine now free of the seizures. Thanks for the video.
Ur very welcome and I’m so glad this helped you and so many others
This is awesome. Thank you so much for this video. Unbelievable the amount of information and help there is from good people like you on youtube. Going to try it this weekend since the ghost touches makes my uconnect essentially unusable and I have nothing to lose. Almost shit a brick the other day when i found out the new POS 8.4 uconnects are $2400 to replace, which will almost certainly run into the same issue. THANK YOU
My pleasure brother! Super glad you enjoyed. They messed up big time when they manufactured the 8.4’s.. this 100% should be a recall by now and free of charge to the consumers.
I did mine yesterday gotta say the removal of the motherboard is a lil bit tricky but it’s easy the glue removal I recommend using hand sanitizer it worked better than alcohol
@@yiyingtomex hand sanitizer contains alcohol
Worked so good! Removed the glue, got a new digitizer, and used thin tape on the edges. Worked great thank you so much!
My Pleasure 🙏🏼 thank you for watching.
I followed this video to a T and had AMAZING results! I ended up ordering an aftermarket digitizer for about $40 just to eliminate the haze and it works like factory!
Thanks again for the informative video and examples!
My pleasure brother 🙏🏼
Could you send link to the digitizer you bought, also does it come with a some type of adhesive application?
@@Caligiant It’s brand/name was FAKEME 8.4 Digitizer, there was only 1 available but just make sure the ribbon cable is the same and you’re golden.
After being quoted 1200 from the dealer for a backordered part, this video is absolutely invaluable. Thank you
EDIT: I tried my hand at fixing the screen this way, and apparently I messed up somewhere along the way because now the screen is completely unusable. Good luck to anyone trying this method.
Obviously this is a method you would be doing at you’re own risk. They use a glue inbetween the digitizer and the lcd screen and once that starts leaking from between them that’s when all he’ll brakes loose.
I’m assuming you need a new digitizer or.. try cleaning the male end of the connector and the female end.. a little bit of that glue gets in there and I would assume you could lose complete function of the touch portion of your radio
I’m sorry your first shot at it didn’t go so well. Either way if your faced with spending upwards of a $1000 bucks, I would like to think this is worth a shot for next to nothing! I haven’t had any issues since this video with my touch screen
I did the same thing and the screen shattered 😩 I was so hopeful
@@aliwhitney2671 my screen also cracked while trying to remove lcd from digitizer. Did you have any luck in finding digitizer
Just watched your video this morning and I am done doing all the steps this afternoon with no problems with my 2018 Chrysler 300 head unit it is working fine now.. So the grease I think the reason it is there is a protective layer for the head unit. What I mean by this is if you live in a area with heat and humidity, the space between the head unit and the digitizer water cold form on those hot days in that space and then the water would fall into the head unit and in time rust or short it out. Same thing if you live in an area that is cold the water in the air could freeze then melt causing water damage to the head unit. But i think this would take time ..I hope a long time years..
I have the same issue. This should constitute a recall. The consumer safety commission should look into making Dodge replace these screens. The ghost touching is distracting while driving, and potentially could hit the SOS button on the app screen, or dial random people if your phone is hooked up.
Mine was doing all that. I ghost called my mother in law multiple times.
Thank you so much for the video saved me a shit load. To all watching make sure you thoroughly clean the digitizer. I thought it was clean put it together, touch screen did not work. Took it apart and clean the digitizer again. It all works perfectly. Your the man!
Thanks Man, 😏🤙🏼
Glad it worked out for you.
Omg - we are at the end of our rope trying to figure this out and I was about to send to Orlando, lol. We are going to try this! I have the 2017 Chrysler 300S also.
Just finished cleaning mine. Ghost touch gone, but so is all touch capability. I thought I cleaned it pretty thoroughly, but may try it again like you mentioned.
PRO TIP. for anyone asking how to remove the digitizer from the LCD if the glue is melted through enough some 20lb test fishing line would be a nice way to remove the digitizer from the screen
Quick question when I took the glass screen off the brown tag came off with it ...do I need to replace everything now or can I put it back in
@@properimage6476 you will need to purchase a new digitizer you ripped the ribbon cable off, and you cannot buy the ribbon by itself
Man!
Did it!
STICKIEST STUFF ON THE PLANET.
But got it done, it kinda glitched out for the first day. Now its smooth as butter no more ghosting or obviously delaminating, thanks man. Saved me about 2k!
May of spoke to soon its still glitching a bit
@@kompletebaybee2143 it’s the digitizer, replacing that in this case/ur case will fix your issue of the glitching. Mine has glitched several times since I did this and it’s because I was way to aggressive when cleaning it.
@@TheHandsOnGang561 thanks man! And yeah i probably was aggressive cleaning it too. But that stuff was a b*tch to get off lol
Didn't know this was so common. Thanks for the video
My 2017 Charger RT is doing the exact same thing. Got so bad can't even use it and the delamination is about halfway going almost horizontal. Dam thing goes nuts flipping all over the place. I will do exactly what you did. Just take it out, relax and clean it up. I am glad I found this video.
Your are lucky i punched mine in then saw the video. Fuck
You are welcome. If you need any help just shoot me a msg I’ll help as best as I can
Side Note: on super hot days I’ve heard from others the stereo will act up, this is rare but it’s something worth noting.
@@michoacanohh2227 I have beat the crap out of a cassette deck when it ate my tape, so I can relate but I have mellowed out in my old age. haha.
@@TheHandsOnGang561 I plan on doing it this weekend, I'll get back with an update. Thanks.
Awesome, sticky as hell to fix, but worked like a charm, and I'm only out $10 for the tape and alcohol. Thank you!!!
My pleasure brother 🤙🏼
What tape and alcohol did you use?
Thank you! Literally the same day I had replace the APIM module sync 3 on my 18 mustang my dodge 2018 screen did this. From what I have been researching all these systems have one problem or another. Bull shit but Ford is reimbursing me and U connect will sometimes send you new screen if you call them! Just heads up for someone having more of issue and can’t just clean ! Thanks again!
This works! Thanks for saving me a ton of money 🙌🏽
😉
What’s the yellow tag on the touch screen for and where do you put it?
Thanks for this video, it helped me fix mine!
Awesome video! I was thinking of getting a new screen and shit but this looks like it will fix my problem! Ty
You are absolutely welcome 🤙🏼
How and where do you apply the double sided adhesive? Does it run in strips across the entire screen to act as the original adhesive did? Do you create a full coverage barrier between the lcd and digitzer? I am going to be doing this later this week and want to make sure I am clear.
Thanks so much for this. You are a BOSS! Chrysler knows about this and is basically stalling on the recall.
I just applied a thin line of double side adhesive around the outer lip were the digitizer meets/touches the LCD screen.
Hope this helps 🤙🏼
I’m thinking about doing this to my 2018 ram and was wondering is there any other adhesive around the perimeter of the digitizer or is it just the goo glue
The only adhesive is Mainly just the super messy glue that Is in between the digitizer and the lcd screen. Other then that ur free and clear of anything else really
The best glue you can use is the loca glue perfect. Try that to reattach the digitizer
Question: Could a screen protector film be used on the display surface as a barrier between the digitizer glass and the display? My thought being that perhaps a tinted (or clear) film might prevent glare or random glitches from occurring. Unfortunately I'm begging to see the same delamination issue on my 2018 Challenger's 8.4 Uconnect screen.
Exactly what I was thinking about to. Very good idea I think it’s worth a shot, once getting rid of the nasty glue maybe a iPad type screen protector inbetween the digi and lcd screen would really help it out. The digitizers they use on these radios are overly sensitive and not rated or created for much more then optimal perfect conditions.
@@TheHandsOnGang561 this might work, I current have a film protection on my screen
this really should be a class action lawsuit
where did you buy it?
Did this and ended up disconnecting the ribbon connect from the digitizer and the little black wire that goes from the screen to the bracket and now my touch screen doesn’t work but everything can be seen on the radio. I’m going to order a new digitizer since that’s still cheaper in the long run am see if that lets the touch screen work again. My question is how important is that black wire that goes to the frame(bezel) cause I have no way of reattaching it since it looks like it would need to be soldered
I believe that individual little black wire that kinda clips/plugs in it the antenna ? Don’t quote me on that, if it is the antenna then the only thing is ur radio won’t be able to pickup stations. You might be able to glue it with some crazy glue depending on how it broke. You only want the glue around it while pushing it down not under it, just around the edges and it should be fine.
Hope this helps 🤙🏼
You're the man. I Just did this. I literally hot glued the digitizer back on (just around the edges, none in between the screen and digitizer). Its high temp hot glue so we'll see how long that lasts. Works like new though. I recommend 99% isopropyl alcohol and an old plastic card to scrape the glue, which is absolute demon sperm. Thanks for the vid!
My pleasure 😉
Yeah i have the same problem but i was wondering when i take the plastick off the screen how to put it back after i'm done
Im getting mixed info on just removing the factory glue thermo barrier...some are getting the same issues when it gets warm...starts acting up again..any input on this?
I am so late on responding to this I imagine my input would be irrelevant at this point ? Let me know
Please excuse me for asking what could be considered as a dumb question but what exactly did you do to repair this? I’m assuming it’s that digitizer screen that’s causing everybody to have all these problems with delamination and all but was it all you did was just successfully peel that off without breaking it, using rubbing alcohol to clean the screen and the bottom of the digitizer but how did you re-glue it back on?
I put in the video what I used to mate the digitizer back to the radio/Lcd screen. The real real problem is that the digitizer is just overly sensitive. Once the glue starts leaking from the unit it makes the unit go nuts! I cleaned off all the glue and re-mated the digi back to the stereo and it nearly stopped all the issues I was having, and got rid of the giant bubble that took over half of the screen. Still on super hot days I do get some crazy behavior from the radio but nothing like it was before. That’s not a dumb question at all brother, and I hope this helps
I accentidently broke my yellow digitizer cable. Can I replace just that or do I need to replace the whole digitizer? Do you have any recommended links? Thanks in advance.
If you cant remove both sides of the ribbon cable and just replace the cable I believe yeah you’ll need to get a new digi. I didn’t replace mine only cause the specific model I have was kinda hard to locate. Type in 8.4 UConnect Digitizer in the eBay search and look at the result of any that look like the same cable)s model as urs and you should be good. Hope this helps
@The hands on gang where did you order the cover from?
I didn’t order a new digitizer I just cleaned it and reused it.
Hope this helps 🙏🏼
ive been looking around at a lot of videos. you are not putting a new adhesive between the new screen right?
Correct, just cleaning the old adhesive off so it stops all the ghosting and going bonkers.
Does this fix the screen pushing buttons as well? Ive been reading some of the comments but cant seem to find the answer.
It should that’s specifically why I made the video commonly known as “ghost touching”
My screen in my 2017 Dodge Challenger was have delaminating and i rapair that, but, i replace the touch because he touch alone, and the new one do the same thing, u know what can i do?
Did you try this repair in the video? cause this is a extremely common issue.
mine had so much glue (sticky goo) between the LCD screen and digitizer it was impossible to remove the digitizer without cracking the screen. How did you remove the digitizer?
I’m sorry to hear that man. I used my hands and just pulled it straight up evenly from every corner at the same time. It was aggressive but eventually gave and came off.
Is there a video how to take everything apart in your “million pieces” ive been looking on youtube for a while. Bought the digitalizer but all videos ive found so far replace the whole lcd
I’m gonna be pulling mine apart again to add in a extra’s. I will make a video completely disassembling and reassembling. I apologize for not filming that part for you.
For the meantime I hope this helps.
czcams.com/video/ZuJJLyniXgI/video.html
You da man 🤙 thank you
Thanks so much for this video! I bought my Charger used in February of this past year, and now i'm getting the beginning signs of the bubbling in the upper left hand corner. I'm trying to figure out if i should attempt this during the summer or wait until it gets cooler out. Right now i don't have any ghost touches luckily, just the bubble at the moment. My one question is that if i just put the adhesive around the sides where the black border is, i would assume the digitizer would rest against the screen. Is that a problem? I had read elsewhere that they shouldn't physically touch. I guess if using double sided tape would lift it up higher, but then i could see the digitizer getting bent towards the screen with touches.
I'm also trying to find the right digitzer for my radio which has the same ribbon cable as yours (just in case), but i can only find 1 on ebay for $138. Have you had any luck finding the one for yours?
You’ve brought up some great questions, Me personally I didn’t touch my stereo until it started ghost touching and literally just going bananas, I’d have to drive around with the radio off the whole time cause it was so bad, couldn’t listen to music or anything.
My opinion I wouldn’t touch ur setup until it starts effecting it’s operation/performance if you know what I mean, the bubble is a eye sore for sure. So the black border actually keeps the digi at a distance automatically it never touches the screen, but you are correct if I were to press hard enough on my digi it does in fact bend and touch the lcd screen but the digit is stronger then you think it takes a pretty firm press to get it to flex to that point.
When put back together after removing the gel it sits in the exact spot it did from factory minus the glue inbetween. I did not buy a new digi because as you were saying they are kinda hard to find that exact model with the 2 big ribbon cables like that.
@@TheHandsOnGang561 Thanks for responding! Good to know, mine is still in the beginning stages, looks dumb but not affecting the radio yet. I'm curious to see if it'll resolve itself in the cooler months, but I don't have high hopes. But I don't want to break the digitizer either by doing it too soon, so we'll see. Either way, I'll eventually be doing this method. So thanks for figuring this all out!
Have you had any luck finding a cheaper digitizer? I cracked mine
I’ve looked online and can’t find the digitizer for a Dodge Charger 2017. Can someone please provide a link to buy it
They have a few different models of digitizers for different models of the 8.4, once you removed yours youd look up the model on the back sticker then search that in Google and or Ebay.. if you can provide me with the model digi you have I can find a link for you to a replacement. Hope this helps
Thank you for the detailed explaination 👌
I have the same issue in my 2017 300S and as you explained, bubbling started on the top side.
May i ask how did you remove the digitizer off the screen?
Its kinda scary and i feel i might crack the digitizer as the glue is still holding it to the screen.
Thank you again for this video.
It is very firmly stuck with that glue so I understand ur concern. Try and grip multiple corners while just gradually separating it from the glue. You can even warm it up a drip with a blow dryer so their isn’t as much tension. Hope this helps brother and ur welcome
@@TheHandsOnGang561 i used a razor blade to remove the digitizer and it worked for me.
Cleaning the glue was a nightmare but ended up with 3+ hour of slow progress until it was as good as new.
After reinstalling the screen it worked perfectly, however after running the car for an hour.. the screen starts to touch randomly by itself none stop. After it cooled down it started to work again.
Could this be a problem of not having the glue between the digitizer and the LCD screen? Is your screen working well so far?
Btw i live in the UAE and temperatures started to reach 50+ celsius 🥵
Thank you.
@@faressubh3132 I have occasionally noticed some malfunctioning with my radio when the day would be at its hottest, I believe I need to upgrade the software in my unit because It turned on but was just frozen 🤷🏻♂️ The main reason why I did this fix was because of ghost touching and the stereo becoming nearly inoperable, it hasn’t ghost touched again since “knock on wood”. I would suspect the digitizer once it reaches a certain temperature as most electronics it could start to behave erratically ex) ghost touch and ect.. sorry for the late response btw
@@TheHandsOnGang561 no worries bro.
Yea i think high temperatures are the main cause for the ghost touching to start again. Maybe that glue/gel was dissapating heat somehow off the digitizer. I have removed the digitizer again and put some thick double tape on the edges to create a tiny gap between the LCD and the digitizer. Reinstalled again and tested at night (temp. Is 36 C) and so far so good.. will test again tomorrow at noon and leave the results for the people to benifit from my experience.
@@faressubh3132 awesome. So yeah the reason why I did mine was because it was ghost touching on it’s own and crashing and restarting by its self so I would assume that the glue they put inbetween the digi and screen isn’t the key. You might be right tho i said that same thing a few weeks ago to someone else’s comment that the glue is what dissipates the heat somehow ? And once their is a air bubble in between the screen n digi it creates a sorta hot spot which then causes the ghost touching ? I also heard they might use the glue for glare purposes.. once we find these answers we can set off and make the radio perfect without giving away a ton of money in the process, ya know.
I have a Chrysler 300c 2017 I just wanted kno how much would you charge me if you can do it to my car, I’m
Having the ghost touching issue
Did you ever fix it ?
Hey my new friend. When I removed the digitizer, it shattered. I caught hell removing the ribbon. Guess I'll have to wait 2 wks for my digitizer. Quick question, when i was removing the digitizer with the blade, the black screen came up as well. Did I just ruin it? $1500 is not something I want to spend.
What’s up brother, Did you take it apart before removing the digitizer ? The screen should be removed from the stereo then the digi should be removed from the lcd screen. It’s a break down process then the removal of the digitizer
volviste a ponerle pegamento a la pantalla?
After the replacement mine is multiplying the image and flickering any thoughts did I mess up the display?
Sorry for the late reply. Disconnect from lcd forward and clean all ribbon connections at the head and reattach, should fix that 🙏🏼
Hope this help.
There’s a black wire that you kept connected between the two motherboards. That must be the same ones that came undone on my 2018 Durango. Do you know what wires that is? I need to find a diagram or to see where it’s connected.
Thanks and great video
I believe it was the antenna wire but I could be way off. Sorry for the late response, glad this video helped in general..
Have you tried acetone to remove the goo glue
No, to aggressive I would assume, but possible ? Be safe and use alcohol. My notifications are on but I never get notified when people respond so I’m super sorrry im replying back this late
Did you put anything to seal the digitizer back before reinstalling?
Yes double sided scotch roll on glue, I put a picture of it in the video, sorry for the late reply tho. 🙏🏼
I was about to put my fist in my radio. I just did this to mine and works perfectly! Took awhile to get that damn goop off but its done. Thanks for the video!
From me being someone who hasn't disassembled their 8.4C U connect yet. Can you explain or is there a video showing how to remove the digitizer from the LCD screen?
@Bnbenitos Ur welcome 🤙🏼 I’m glad it helped.
@@chrisharris4678 just use patience and work each side separating it, the glue is pretty strong. I would even recommend using a blow dryer if ur not comfortable using to much force, it will separate.
Did you have to add anything to replace that gel or whatever in between. I have a new digitizer and wanted to do myself if I can
No i didn't add the gooey crap or anything else. Works just fine on mine
Great video ty
Awesome. This is exactly what i was looking for. My 2018 hellcat started having bubbles. Does anyone know what type of adhesive we can use between screen and digitizer?
Yes I put it In the video, i used a double sided scotch adhesive roller to mate the 2 together, it’s in the video with a picture. The black outring once reinstalled seemed to hold the digi to the screen really well on its own so the roller was just icing on the cake. Hope this helps
Are you the original owner? Or second owner? Call Chrysler customer service and they will help you replace it.
@@Roonsine i am 2nd owner but my car is still under warranty, luckily i bought mopar extended warranty when i bought this car. for me it shouldn't be a problem to get it replaced but the weird thing is that fca(stallantis or whatever) is not owning this issue at all, they should replace it for out of warranty cars too.
there should be a recall, its a very common issue.
@@MrAhkhan89 I've had a few OOW cars get the screen replaced, but yes I agree it's a defective radio. But they realized the fault and removed those bad radios from production.... still a smart move would be to recall the bad radios still
Hey where was all the places you placed the tape on
Just around the out edge where the digitizer meets the radio bezel
Did you have to use something between the screens to replace the goo?
No I didn’t. I cleaned it and put the screen back on and that was it. I’ve had a few instances where the radio would become unresponsive or it would jump around a little on its own but very minimal since this fix.. 99% of the time the radio now works absolutely perfect. Hope it helped 🤙🏼
On a separate note, I was informed by Uconnect that my 2014 jeep Cherokee has 3g for the system. At the end of 2021 3g will be gone. This means my Uconnect system will no longer work/be compatible with anything. There is no guarantee that replacing the entire system will work in the 2014 model. Has anyone heard this and is there a fix?
The 5g service will be available with the obdii plug and t-mobile service with better features and a reduced price. Works well for my 2015 Charger. Might look into that as a possible solution.
That's exactly what's going on with our 2018 Dodge Ram 1500. My wife noticed the delamination before I did but the thing will just go crazy switching songs, switching controls, ect. We just got the truck 3 days ago so I'ma see if I can get the dealership to pay for it but if not this looks like a good option. Or give the truck back to them and tell them we want our trade in back.
:-D
Yeah this is kinda a last resort when the dealership won’t help at all to fix a issue they kinda created. It should be a recall by now but wish you all the luck in the world that they replace it for you free of charge or else it’s gonna cost over a grand, or just do this for less then 3$ and maybe 3 hours of ur time and you’ll be happy.
Thanks for the sub brother 🤙🏼
wait so all you did was just clean the glue as mine on my 2013 charger rt dayton i just bought not long ago i can maybe press on thing it'll open then it'll press and open something else or just wont let me press anything so is mine the same problem or? it's driving me crazy i don't have any bubblying but i can't even use it i can maybe press one thing then can't when i press to try and open one thing it opens something else that i didn't click on
Sorry I am not on here as much as I would like to be so apologize for the late response. If you don’t have any bubbling it could be the software might need to be updated/refreshed. I am no expert on these screens or 8.4 radios in general I just messed with mine until it stopped going nuts and tried to film what I could along the way. 🤷🏻♂️ fortunately it worked perfect for me “yes I just cleaned the glue off and reattached it and it worked” and has been working since I did it” I would taking it apart and clean the glue if it’s not leaking “bubbling”
Hope this helps 🤙🏼
WHAT DID YOU USE TO REATTACH THE DIGITIZER? I ORDERED SCOTCH DOUBLE SIDED ADHESIVE ROLLER AND HOPEFULLY THAT WORKS
That’s what I used to, it worked out fine. 🙏🏼
@@TheHandsOnGang561 SAME! AND GLAD TO HEAR
Did you have to clean the backside of the digitizer as well? Also where did you place the double sided tape? I.e. borders, everywhere, particular pattern?
Yes i had to clean the back side of the digitizer as well. I put that scotch adhesive completely around the outer lip border of the screen and mount, then I gently applied pressure to the digitizer to really get it bonded to it, once I put the black outer ring back clipped on I felt confident enough I wouldn’t have issues with it moving in the future.. will update my video tho as time goes when or if something fails.. hope this video and my self helped ya! Let me know if any other questions rise
@@TheHandsOnGang561 Okay thanks Joe, that’s pretty innovative. My delaminated ‘18 Ram Uconnect is getting replaced by the dealership under warranty but even the replacement units are still faulty and will delaminate due to the heat generated by the unit. Most likely I’ll be doing what you showed in your video eventually, hoping your fix holds out for the long haul. Thanks!
@@andymike6575 you are very welcome brother. So far so good As to function after fix, I haven’t had any issues at all. When I said apply adhesive to screen I meant the outer little black lip, do not apply to actual glass screen inside. I just applied it to the lip and the digitizer seemed to mate pretty well, the more you roll the adhesive on the thicker the layer you are putting down becomes. the black outer ring seemed to even further push it up against the lip making it mate even stronger. Unfortunately you are correct it will most likely default again in the future. 1 thing to note is that the super sticky stuff that causes this issue did leak down into the behind area of everything leaving quite a little mess I had to clean so once the bubble is visible that means the glue has started it’s departure from the screen and into the car, it’s some pretty nasty stuff
I plugged my display back in but the touchscreen hardly works now… what should I do?
I’d try disconnecting all the plugs, and making sure all connections are clean, and be sure to firmly plug all the connectors back in properly and see if that works.
Hope this helps.
So what did you exactly do to hold the digitizer to the screen? I know you showed the product but what did you do?
I put it around the outer lip of the radio where it originally mates with the digitizer, you don’t even really have to but it’s a good way to ensure it’s centered and on good.
Hope this helps.
Thank you so much!
@@56Superdude Absolutely. You are welcome 🙏🏼
Hey I’m having the same issue with my SRT. How difficult was it to remove the digitizer without damaging it?
Hey brother, not difficult at all… it’s under some pressure removing it from the screen but just take ur time and be gentle you should be able to take it off without any issue. Hope this helped
Hey sorry for all the questions, did you use any tools? Like a blade or plastic pry tools?
@@royvasquez1290 i used a long razor blade and it made the job much easier.
For me the screen was working fine after the job was done. However with excessive heat random touches on the screen are happening.
I may take it apart again and apply a replacement glue from mobile repair shops. Or maybe use a thick double tape on the side to make sure the LCD and digitizer do not tough each other.
@@faressubh3132 hey man can you help me visualize your solution. I’m not getting the double tap method. Sorry I’m just annoyed atm because ghost touching is happening on my wife’s Durango and we are being quoted a diagnostic fee of $350 and $850-$2.5k to replace the damn unit for this stupid defect that’s not our fault.
I already solved the track light leak which was a pain in the ass, so I think I’ll be able to solve this. Also in your case did you just remove the glue entirely and put the same screen back on?
Happened to mind few months ago. Maybe due to heat on inside of the car.
Would this work on a 18 Daytona 8.4
It will work on any 8.4 UConnect.
Hope this helps
How much of the scotch double adhesive did you put on it
Sorry for the late reply.. I just did a few passes around the outer lip and that was plenty.
Hope this fixed helped you. Merry Christmas and Happy New Year.
Thanks for the reply it worked great and saved me alot of money I really appreciate it
When you put the digitizer back on did you put anything to seal it. Did you have to replace that gunk or put some kind of glue around the edge.
No I just used the glue I showed in the video around the outer edge just to mate it back together no more glue In between, hope this helps
@@TheHandsOnGang561 Maybe I am misunderstanding you. Are you talking about that sticky stuff that was all over the screen? If not, I missed what you are referring to.
@@toddstubelt4023 yeah so ur gonna removed all of the sticky stuff and clean it off, clean the digi off as well get it as clean as possible and put back on. The black little metal ring you take off be sure to bend those tabs back down so it clips on tight, if you watch the video in the mid of the video I show what I use a double sided glue roller and just went along the Outer Lip of the radio where the digi physically touches the radio and pressed the digi back on and when I put the metal black clip back on it really sealed the deal in holding the digi back on the radio
@@TheHandsOnGang561 Got it. Thanks
Used a magic eraser. That worked really well taking the sticky stuff off. Didn't you say that it had to be connected with the car off to sync with the radio. How long did you do that for
I used Goff off and it made short work of the glue.
This helped alot. except i broke my digitizer lol.. cracked it.. but i still installed radio without digitizer. and obviously no ghost touching now but no touch screen either.. having to use buttons and knobs to navigate , ,, either way im happy right now because i havent used my radio for over a year... gonna order digitizer soon
Yeah my digitizer is toast theirs a finish on it that I kinda rubbed off when doing this process so I need a new one as well.. that was the goal tho to help others so they can at least at the minimum use their radios again ya know without it going totally banana on you.
Thanks for the comment brother, and I’m glad this helped you and the many others! 🤙🏼
I tried to reinstall the radio without a digitizer as well but all I’m getting is a black screen when the car is started. I ordered a digitizer but idk what the issue is at this point
@@c1th that sounds like it might be a different problem. Maybe something not plugged in right? Because the digitizer is just a clear screen that enables touch screen. You should still get video with out it. Hopefully the radio itself isn't messed up
Did you apply the tape to the complete surface ?
It wasn’t tape if you did see that little roller it was just a double sided roller glue that rolled on. Not sure what the yellow tag was for, I will go back and watch my video again and see if you haven’t figured it out by now.
Heard rumor of a shop in Orlando Florida fixing these for approx 300 plus parts. Anyone got the location?
In the “Part 2” video I posted I mention them. Last I talked to them way back when they were asking for around $600/$650 and the parts were on back order from China so it was like a months wait. Think the website for the business in Orlando is called Infotainment.com
hope this help! 🤙🏼
So I did everything and the screen turned white trying to figure out what it could be . You think it could be the digitizer?
Or try reconnect everything make sure everything is securely plugged in properly. The digitizer is just for touch feathers. Unlikely unless things aren’t plugged in properly. That’s my guess, hope this works, let me know
@@TheHandsOnGang561 yeah thats what I'm thinking.
Ok so the screen on my 2018 Chrysler 300 just bubbled up from top left hand side. It has 38k miles not under warranty anymore. But I still called the dodger dealership. I asked them if it was under warranty, and they said they would take care of me. They already ordered the screen at no cost to me. So I would recommend to still call and check. I also said I’ve read this is a very common issue with these cars is there a recall or any assistance?
@HeyPita So I’ve called UConnect and Also contacted dodge, they pretty much told me to kick rocks. Im glad to hear you had better luck, I certainly recommend people do what you did first before doing what I did. As far as I know there is not a Recall unfortunately.
@@TheHandsOnGang561 I would recommend you ask them for a “customer assistance policy” they have to give that to there manager and the manager sends it off to Chrysler. Do that, and let me know what they say!!
@@heyyelcy which company would I be calling and asking for a customer assistance policy in order for them to report it to Chrysler ? I am interested in further pursuing this so I can give out even better information moving forward to my viewers and Subs.
Thanks in advance 🤙🏼
@@TheHandsOnGang561 I would contact your dealership wherever you have your car serviced at. And ask your service advisor!
Do you know how to stop the sound when the door is open when the car is on?
I would assume all settings and stuff like that would be controlled through the infotainment system. I am unsure of ur make/model vehicle but if you let me know I’ll see what I can dig up.
Hope this helps 🤙🏼
@@TheHandsOnGang561 i got 2017 scatpack charger
Did you put any new glue on it once u put it back together?
Did you end up getting a new digitizer or did you clean the existing one you have? I’m gonna be doing this project soon. Stupid delaminating hit my wifes uconnect.
Edit: sorry but after cleaning off the goo on the screen how did you apply the digitizer back on to make it stick?
Nope I just cleaned the old one and re-used it. I have a part 2 three week update video I made to show how it turned out if you wanted to check that out. I just used some double sided scotch adhesive and just went around the outer lip and re-mounted it back on top of the screen.
Hope this helps 🤙🏼
@@TheHandsOnGang561 you’re the man. Thank you. I’m going to be trying this at my own risk. Worst case I shell out a new digitizer. I also saw your part 2 and if it looks like it’s still going strong I’m for it.
@@ManchesterUtdFan you are very welcome brother, good luck and if you find ur self in a pinch and need some help I’m here man just drop a comment and I’ll assist the best that I can. Thanks again for the kind words it means a lot.
🤙🏼 happy new year to you and yours from the Hands On Gang
Did anyone have issues with the touch screen not working? After cleaning all the glue off the screen and digitizer the “bubbling” is gone. However it doesn’t have any sensing when I touch it the display
Most likely the ribbon isn’t fully reattached. Sorry for the late response tho 🙏🏼 gotta clean the connection to both sides just to be safe when reinstalling.
so did you buy a new digitizer or no? and did you replace the clear goo? I think that shit is actually pretty important. I'm looking at a 2018 JGC that has this issue. and sadly, it's 4 months out of warranty
No I didn’t replace the glue and my radio has been working great since, also I kept the digitizer because they are actually hard to find but ur best chance is EBay finding the model you have.
@@TheHandsOnGang561 thanks for reply and information man! great video
@@scott_0492 no problem, yeah it’s worth noting especially if ur about to drop some money on a jeep with the same stereo, dealership normally what I’m hearing is around $1200 to replace/fix. Once the bubble shows up that means it’s leaking this nasty glue into the interior behind the dash. 🤙🏼
Where can I get a digitizer?
eBay
Just curious on the adhesive. Do you basically reset it 100 coverage to adhere back correct?
Just around the outer lip where the digitizer meets the radio.
@@TheHandsOnGang561 so, you didnt add another glue between touchsrean and digitizer? just double sided tap in the corners?
@@nikita37031 yes, I just did it along the outer lip of the stereo to mount the digi back to the radio. The black shell that you remove when taking apart, that in it of its self holds it very firmly back to the radio.
@@TheHandsOnGang561 Thanks much appreciate it
@@billyphillips4905 absolutely, I knew this would really help others so much.
How did you get it to recalibrate or did you factory reset
I just ran the car through a full cycle, on off run ect and the radio worked perfect.
Hope this helps 🤙🏼
@@TheHandsOnGang561 I think my digitizer is a little bad off I’m still getting ghost touches and my gps is whacked out lol so I’ll probably just change that
@@williejones8977 absolutely. It’s unfortunate we have to deal with this, Chrysler nor UConnect want to help out at all. I’d try a new digi and go from there, hopefully that helps brother.
🤙🏼
@@TheHandsOnGang561 I appreciate it I think I’m just gonna go aftermarket even tho I hate the way the dash kit is made I’m gonna do that and be done with it lol
I did the same thing but when I was using the butter knife to separate the digitizer from the screen I accidentally cut the wire a little bit but I ordered another digitizer off of this app yesterday only $36 and some change not much at all
Have you tested it yet?
@@ahmedaltamimi750 The new digitizer? yes it works good the radio is back to normal and i put electric tape around the edges of the screen so there won’t be no more glue leaking on the screen i posted a video ill do another one showing you everything works
@@gta_bandit739 I also can’t get the glue off for some reason it’s all over the screen and I use alcohol and no luck
@@ahmedaltamimi750 well you gotta keep trying use a wash rag and kinda scrub hard mine had a lot to it takes a few minutes
@@gta_bandit739 no luck for me it’s all so thick and very sticky im going to buy some goof off and hope that fixes it
I cracked my digitizer by using fishing line. Also damaged the polarized film on the screen it self, end up taking it to the shop to get it fixed. I should of bought new screen and save my self a headache and wasted time.
I did see some suggest using methods such as ur self to remove the digitizer. I used my hands and just pealed it off from one side to the other. It’s a shame these Radios are prone to such malfunctions, add on top it cost over $1,200 to fix at a dealership. Many are resorting to fixing it them selfs, the US just received a huge inventory of resealed lcd screen’s for the 8.4 that say are “guaranteed not to leak” I see them selling for around $500.00 on eBay. This is a real unfortunate situation for 8.4 owners like us who have been forced to take matters into our own hands, when help from Chrysler is really what’s needed. Sorry you hit a snag like you did bud
I was pumped after seeing this video as well. I am writing this because I am in the same situation as all of you and it's not good. I have already replaced the LCD unit (digitizer glass installed) twice due to this problem. I bought both of them from Factory Radio Repairs. The first one delaminated within 2 weeks and they exchanged it. Cost me $460 and the worry of taking the trim on and off since the clips have a tendency to break. Got the second one and it was even worse. It delaminated within a few days. They refused to cover replacement. Said they didn't cover that because it was a manufacturer's defect. Now they sell that for $690. Buyer beware. This is a HUGE problem that Dodge refuses to address. Seats start to heat on their own, attempted SOS calls, buttons all over the place. In my mind, this is a dangerous situation. So now I have the old unit that's delaminated and the new unit that is delaminated. So I do exactly what The Hands On Gang does, get it all cleaned up, looks great, and reinstall it. No luck, unfortunately. Does the same thing and worse I think. What a mess to pay so much for a really nice car to have this problem. Good luck to the rest of you. We need a class action lawsuit is what we need. Now I'm trying to figure out if the digitizer glass was bad on both units or what??
Yes we do brother, the FCC or UConnect or whatever company whose responsible for this glue leaking and really overly sensitive digitizer that turns the majority of the car into a living nightmare should be held responsible for this. My rear shade would go up and down, air would kick on and go full balls, then shut off, and then turn right back on, radio would just start calling people, so on it’s just a total nightmare and nobody wants to be held responsible they want to put it on the consumer! It’s sad. Ur not the first person to spend all that money, end up with 2 radio and still be in the same boat and out 100s of dollars. Sorry this trick didn’t help ya brother. 🤙🏼
@@TheHandsOnGang561 Man you are so right! Really sorry to hear that you went through that as well. My wife is going through it right now and I am worried sick about it. I'm going to try lifting the digitizer glass off of the LCD with some gorilla glue double-sided tape that I saw on another post that I guy had to do. If that doesn't work I'll buy a new digitizer glass and see what happens. I'll let you guys know either way. Might take a while though.
@The Hands On Gang - UPDATE!! It worked! Thanks, guys. My wife told me a day after I had done the work that the radio was working great. I wanted to wait at least a week before reporting back that the technique was successful! I can only figure that the acetone, alcohol, and Sprayway glass cleaner must have finally completely out-gassed leaving a minute air gap between the LCD and the digitizer glass. No ghosting, no changing stations, no on/off heated seats (thank goodness), and no SOS attempted calls. Just normal operation.
Since I fixed the original, now I have the new one that I bought, LCD display and digitizer screen leftover, sitting in a box. It still needs to be cleaned. If someone needs it and wants to clean it up I would gladly sell it for half of what I paid for it. Other than that I'll keep it as a spare.
THANKS AGAIN!!! You have no idea how relieved I am to have this fixed.
@@Mark-rp4jl still working fine bud?
Digitizer is a little foggy normally, so the alcohol should do the trick.
Yeah it looks completely fine now back installed. I just made a 3 year update I’m gonna post just to follow up on some of the unanswered comments, and to possibly help others with a little more info that I might not have mentioned.
Where are you located
United States
Awesome video! How did u figure this out?
So you ended up using the same digitizer?
Where can i find LG screens for $300, or $60 digitizers? I seen them for $550 or more.
Where did you buy the double sided roller scotch tape for $1?
I did a lot of research on dodge forums and then the bulk of it was just taking it apart and seeing what I find as I go. eBay is where I seen the lcd screen anywhere between $295 and $350 the digitizer same thing about $40.00 to $80.00 max. The roller I got from Walmart it was like $1.89. Please keep in touch let me know if I could help out at all, yes I used the same digitizer
@@TheHandsOnGang561 I’m actually looking to replace my screen. Can u help ?
@@fordswgt9027 of course. What do you need help with ?
@@TheHandsOnGang561 buying a mew screen and digi. Mine is cracked
@@TheHandsOnGang561 can you please provide the link of the screens you found for $295 or $350
Gonna have my husband try this soon lol
I hope it worked out for ya 😏
Hello, I got a few questions.
1) Do you need to reapply the Goo?
2) You mind leave down the link of where you gotten the Digitizer?
P/S : Regardless of what car brand you are driving, we need more people like The Hands On Gang.
I did make a part 2 of this just to give everyone a little more info on how this DIY project turned out. I wound up Keeping the old digitizer because I didn’t have time to purchase another one. I was in the process of relocating so I stuck with the Original digitizer. You do not need to re apply the goo.. just clean her up and reattach everything. If you need a new digi I can find links for you for new ones.
Thanks a bunch for your kinds words brother. Hearing that makes it all worth it 🤙🏼 thank you man
@@TheHandsOnGang561 Hey.. You mind sending me the link you got the digitizer? Most of the digitizer I found are $100 and above.
@@emperorkenji6332 if you watch my 3 week update (part 2) to this fix, I did not purchase a new digitizer I kept the original one. Unfortunately since I’ve made the video it seems a big influx in revenue has been received in the US I see tons of new screen’s and digis and the price I believe has went up.
I see what you are seeing around 100 and up for the digitizer alone unfortunately. If I see them for cheaper anywhere I will leave a link under my next reply to you brother. 🤙🏼
Hey thanks. Mine is coming off. Ill try removing the glue.
So after you get the screen clean and try to install the new digitizer you don’t need glue?
I asked one tech at local fca dealership about this issue as my car (18 hellcat) just started having bubbles, mine is under warranty and i can get it replaced, but the problem is once my warranty expires and the replacement one starts to have this same issue. so he said its because of these units getting hot as they have no fans in there, the adhesive starts to dry off or shrink.
one solution(not a proper solution tho) he recommended is to drill 2 small holes in your ac duct so that it can circulate air through the unit.
or you can always do what this gentleman did in this video, just get rid of that weird adhesive.
Its a shame that fca disowns this issue which is very common, there should be a recall !!
awesome work !! thanks again.
this video is really really helpful I have the same exact issue , I lost it on step when you said that rubbing alcohol did you mean that I have to put alcohol on the black screen rub it with tissue and make it look without any bubbles or what exactly? i will be so thankful if you briefly in a short way how to do this method properly
Yes ur gonna spray it on and wipe all of it off the lcd screen get all of the sticky glue off.. also on the back of the digitizer it has to be cleaned off as well.. then mount it back on using which ever preferred adhesive and bam! Hope this helps you enjoy your radio and car again.
@@TheHandsOnGang561 am really thankful for your reply also for making this amazing video I will try it out I hope I get lucky fixing it ,thank you so much for your efforts sir
@@KAKASHILEGEND22 it’s my pleasure man no need to thank me, I made this to help others save time and money! And most importantly “Get Hands On” 😏 I’m glad this helped you, if you need further assistance just come back here and drop a comment, amongst the many of us doing this fix you will get the help you need 🙏🏼
That film is supposed to be there btw, it's the anti-glare coating
I am aware, but’s also the cause of the ghost touching! Once it starts to leak.. that’s it you gotta get in there and clean it off so it will stop your radio for going complete ape ish.. thanks for the comment tho
Thank Homie I have a 2018 Daytona same thing happed to me.
Your welcome
3000 in canada
Dude......I bought a new screen for $300 last July for my 2017 since my old touchscreen was going crazy and dealer was charging my $1200 for a new unit. It worked completely fine up until last week when I noticed some random buttons being pressed...the same exact crap that happened with my old touchscreen.
I knew it was the damn screen and the delaminating...the dealer was saying it was a crack and charging $1200 for it🤬. Youre probably the only video that completely explains this fix so well. Thank you man
That’s why I made this video brother cause nobody else has really explained what the heck was happening ya know. If you decide to do this fix and need any help feel free to drop a comment and I’ll assist with whatever I can. Sucks spending so much money and not getting to really enjoy it ya know.
Your very welcome it’s my pleasure
@@TheHandsOnGang561 I came to the conclusion that since I live in an area that can reach 100 degrees+...the glue will melt and cause delamination and ghost pressing. Hence why this seems to get worse in summer for me. Where did you get the digitizer? Because I already bought the screen last year and replaced it and it worked fine....until it started reaching 100 degree weather here
@@Silenced_by_nazi_youtube yes. I wound up just using the original digitizer, what happens is the Clear gel/glue you see in the video’ once the screen I presume reaches a certain temperature it melts n breaks away from in between the screen n the digitizer and starts leaking out of the bottom of the radio, once that uneven pressure so to speak between the screen n tizer starts to happen “hence” when you start to notice a bubble, “it’s leaking” that’s when the digitizer starts getting thrown off and ghost touching occurs. The digitizer might just be over sensitive and reacts like that once it occurs. I was under the impression that the gel was there just to keep out glare from the sun, might be there to act as a barrier to dissipate heat in some way ?? I duno. Ur absolutely right tho, this is heat effecting the digitizer/touch panel. You would think Chrysler dodge jeep would be getting a recall in order. I’m not gonna hold my breath
@@TheHandsOnGang561 I was literally about to punch the s**t outta my radio on Tuesday when it started to go crazy.....I thought I was past that crap.
Anyways I don't feel like cleaning it yet, plus it just started and this heat will continue until september/october.. I ended up buying a reflective sheet that I can put over the screen until the weather gets cool. I'll leave it covering the radio when its hot and it's just parked in the sun. Hopefully it'll repel some of that heat away. Let's see if that works 🤣🤣
@@Silenced_by_nazi_youtube lol that’s what I was thinking. I believe a screen protector after doing the stuff that I did that will keep out glare would probably help a ton. We are in this together brother. I’m gonna post a part 2 video today to show a 3 weeks later result so nobody thinks I am having people take apart there stereos for nothing.
If this is so common how isn’t this a recall?
Now that’s the real problem. Trust me man I’ve been asking my self the same question.
I tried this and I think in the process I cracked my actual screen. Now I’m big sad because I placed it back, and I got no more ghost touching, but I can’t even see the screen anymore 😂😂
Imfao oh no!! The screens aren’t super expensive compared to what it cost to get this fixed at Chrysler so you should make out ok even so 🙏🏼
@@TheHandsOnGang561 I can’t find any! I’m only finding full radio sets or digitizers. Would you happen to have a link?
damn why didnt i see this b4 i punched the screen man!
Lol I feel you 100%, with a good amount of research u can get it fixed for pretty cheap.
@@TheHandsOnGang561 i ended up taking mine apart using your video. Just waiting on china to stop the bs with the U.S and hopefully they ship my new screen. Sucks riding around with no music.
@@michoacanohh2227 did you brake the lcd screen ? If not I could walk you through getting you back to enjoying ur car again brother just let me know.
@@TheHandsOnGang561 Im one of the many that punched it in lol
@@michoacanohh2227 😂 I know how it is brother