You just saved me money my friend, I almost went paying 100 euros to fix it. At the last moment I decided to watch some videos maybe I could fix it myself and turned out I just needed to open the key fob and clean it. Thank you so much man
Wondered what the hell had happend .saw ur short did exactly what u said the ball of fluff came out worked like a charm fantastic tip a result thank u so much buddy
Thanks for the video. I had exact same problem and RAC man said it was steering column. I haven’t had steering column changed as it only happened once.
Either that or an alternative method I found the “Hard copy” fob which I hope many still have access to if still having this problem. It registered and let me turn ignition even though with other fob it wasn’t working. But with the hard copy it did! God did 🙏😁. Was trying for 3 days to get it back operational, happy to say it now is 🙏! Just got it back started this morning with the “Hard copy” key fob
Just programmed a spear key after all went successfully original stopped. And spear was not operating. Couldn't figure out what was the issue until someone else removed the EIS. and car back to normal. Still they didn't let me know what they did! I believe they reprogrammed the original.
Can anti theft system can be triggered by trying to remove radio without tools, now my car wont keep running for more than half second. How do i fix that?
Can someone link me to a video of how to take out the circuit board. I’ve gotten everything else out but I can’t figure out how to take out the circuit board. I can’t find any videos either
Remove the battery holder then you should see a white band of plastic covering the circuit board. This is holds the board in place - slide a small flat screwdriver in between the plastic case and circuit board area to make some space to be able to slide in a folded out paper clip. The paper clip needs to be formed to have a small hook at the end and what you need to do is hook it under the white plastic so you can pull - this releases the plastic and you can then slide out the board.
From the looks of it he opened the key fob, took the circuit board out, and tapped the plastic housing on the table to release the built up lint in the key fob. Put it back together then try the key again. Hope this helps!
@@felipefernandes2045 I fixed mine, it was my key, a circuit had came off, and the panic button, I ended up soldering them back on, and it worked with no issues ever since
You just saved me money my friend, I almost went paying 100 euros to fix it. At the last moment I decided to watch some videos maybe I could fix it myself and turned out I just needed to open the key fob and clean it. Thank you so much man
Wondered what the hell had happend .saw ur short did exactly what u said the ball of fluff came out worked like a charm fantastic tip a result thank u so much buddy
Thanks for the video. I had exact same problem and RAC man said it was steering column. I haven’t had steering column changed as it only happened once.
Just saved me money to the mechanics, thanks man
Solved my problem! Thanks !!!
Thank you this saved me time and money
I love videos like this
Thanks man, it worked!!!
Thanks my friend just happened to me in Houston Texas 3-27-2023 did what you say and puuun your magician my friend. 😮❤
No worries
Thanks man you saved me £150
Thank u, you helped me a lot!!
Thank you. Key fixed.
Either that or an alternative method I found the “Hard copy” fob which I hope many still have access to if still having this problem. It registered and let me turn ignition even though with other fob it wasn’t working. But with the hard copy it did! God did 🙏😁. Was trying for 3 days to get it back operational, happy to say it now is 🙏! Just got it back started this morning with the “Hard copy” key fob
What's a hardcopy key?
I had to wink the metal contact sticks for the key battery and than it worked.
Wat does wink mean please hvn same problem
Worked for me
Hello could you please send me extra information, cuz i have same issue but no little ball of fluff..
Just programmed a spear key after all went successfully original stopped.
And spear was not operating.
Couldn't figure out what was the issue until someone else removed the EIS.
and car back to normal.
Still they didn't let me know what they did!
I believe they reprogrammed the original.
What kind of battery do you use?
For me it works but everyone I push the button to start it says key not detected
What could be wrong if suddenly none of the keys i have work. Door locking and trunk opening does not work on either of them
On my side the goes on but refuse to start , what might be the problem.?
Model?
Can anti theft system can be triggered by trying to remove radio without tools, now my car wont keep running for more than half second. How do i fix that?
Ok
Wear the fueil pump
Both keys 😂
Mine works if I push lock button 🤷
How do you open to change battery , I'm using a screw driver and don't want to break it if I do it wrong !
Remove emergency key from top of fob, then use pry end to insert into slot, pry with upward motion, then pull out to reveal the 2 batteries
mines doesn't light up
Can someone link me to a video of how to take out the circuit board. I’ve gotten everything else out but I can’t figure out how to take out the circuit board. I can’t find any videos either
Remove the battery holder then you should see a white band of plastic covering the circuit board. This is holds the board in place - slide a small flat screwdriver in between the plastic case and circuit board area to make some space to be able to slide in a folded out paper clip. The paper clip needs to be formed to have a small hook at the end and what you need to do is hook it under the white plastic so you can pull - this releases the plastic and you can then slide out the board.
i got the same promblem & still wont turn or anything
Did you end up with a solution..?
How did u fix it if it is
Hi
Don't know about that one;JUST SAYING
It didn’t work for me
Don't Work :(
Hi there, I couldn’t understand how did you fixed this problem could you tell me ?. I have same problem with same mercedes key.
From the looks of it he opened the key fob, took the circuit board out, and tapped the plastic housing on the table to release the built up lint in the key fob. Put it back together then try the key again. Hope this helps!
my coils busted off
On the key??
@@MindingmyBizzness yep, got it repaired tho
I’ve done this and still nothing! Someone please help me
I’m dealing with this now, did you find a fix?
@@Street_Costello nope
@@Street_Costello me too >|
@@felipefernandes2045 I fixed mine, it was my key, a circuit had came off, and the panic button, I ended up soldering them back on, and it worked with no issues ever since
Prob the steering wheel lock…
My unlock and lock on the f0b doesn't work all the time. Is there a battery I can replace in this fob?
JOM-774
can I have your WhatsApp group
Did you join mate?
How do you open to change battery , I'm using a screw driver and don't want to break it if I do it wrong !
Pop the metal shank out if you look inside where the shank goes you’ll see a second hole just stick the shank in there and pry