Top 3 Items for your Traxxas R/C
Vložit
- čas přidán 2. 06. 2024
- Today we encounter 3 items that help remove r/c headaches and make life with a Traxxas vehicle a bit easier, safer and more convenient. What are these magical items? Keep watching to find out.
Items:
Traxxas Link Wireless Module: www.amainhobbies.com/traxxas-...
Traxxas GPS Module: www.amainhobbies.com/traxxas-...
Traxxas Expander w/ GPS Module: www.amainhobbies.com/traxxas-...
Traxxas Cell Checker: www.amainhobbies.com/traxxas-...
ProTek Aluminum Fan:
Black: www.amainhobbies.com/protek-r...
Blue: www.amainhobbies.com/protek-r...
Fan Hardware we used:
3x18mm Cap Head Screws: www.amainhobbies.com/protek-r...
3mm Locknuts: www.amainhobbies.com/protek-r...
For all of your RC needs visit AMain Hobbies: bit.ly/XcAuJr
Follow us on Instagram: / amainhobbies
Like AMain Hobbies on Facebook: / amainhobbies
Follow @AMainHobbies on Twitter: / amain_com
MUSIC BY: @DCUTTERMUSIC / HTTP://WWW.DAVIDCUTTERMUSIC.COM - Sport
UPDATE: The new ProTek 35x35mm fan snaps into place on the ESC and no longer needs to be secured by screws: www.amainhobbies.com/protek-rc-35x35x10mm-aluminum-high-speed-hv-cooling-fan-silver-black-ptk-2113/p1287539
-Brett
Did they swap the connector wires?
Yes 20$ for cooling fan great spend money
Perfect timing for this video. I just picked up a MAXX on Saturday. I'm STOOOOOOOOOKED!!!!!!!
Be careful with the Bluetooth settings. I got a Maxx and the link model. After doing all the updates I went into garage then either steering or acceleration and the transmitter stopped working but when I back out one menu the Maxx went wide open.
I forgot to add that Traxxas is aware of this issue for Android phones.
Toothless Vegan what do you think of the maxx give me your honest opinion. i’m looking on picking one up to!
Sweet! The Maxx is a beast of a truck that will really benefit from adding those aluminum fans to the ESC and motor. Cheers!
-Brett
Dude couldn't agree more, I just picked up a Maxx on Saturday as well. I'm getting those fans ASAP.
Definitely need that Bluetooth module ...
Its kinda sad that to adjust the EPA's requires a bluetooth module to make it easier 🤦♂️
Traxxas: make a problem, sell the solution.
You can adjust the epas with the transmitter without the module and it’s not to hard at all I can do it in like 30 seconds
🤣😂🤣😂🤣
It's not hard. Just need to follow simple, straight forward instructions. If you can't, well then buy the solution...
Their radios suck....
The radios don’t suck they just suck for the price
That was very helpful to me .thank you.stay safe my friend.
Number one should have been a FREAKING WALL CHARGER.
Sing it man... Burnin down the house...
🤣
Tess
instablaster...
That’s just a common item
Just got the rustler 4x4 vxl so good timing on this video
Thanks Chabelo. Kewl tips.
We moved out of Chico a couple of years ago,,, I never did fill that hobby shop sized hole in my heart ,,, got my first fixed pitch micro copter from your old location and was hooked ever sense 😍😍😍
Nice! Happy we were able to help you start, now you need to keep it up! Good luck.
-Brett
@@AMain_Hobbies cant believe you guys are in Chico. I got family in Butte county. I'll have to stop by after the next funeral i fly out to! You guys should open a branch in SE Tennessee!
Good Brad , love Amain, my Go To Place !
Keep em coming
Robert Sanchez
His name is Brett
Thanks this has been very educational.
Ì ordered the rustler 4x4 last night from your shop. Thank you for these informative videos
Congrats on the new truck Don!
-Brett
This was really helpful.. I'm going to be getting a car like this and had no clue about this sort of thing.
I typically don’t watch videos like this from start to finish nor did I know Amain made videos! Since then this guy Bret has me watching everyone, even talking about stuff I’m not interested in. And grandma... “for when grandma wants to play, and she’ll never knew it happen because you’ll switch the profiles right there on your phone”!!!!! Hahahahahah. That’s what I’m talking about!
Happy you found our videos Joseph and you're enjoying them!
-Brett
I just picked up these fans and HOLY HELL they aren’t messing around!
Ah, this reminds me, I should definitely get a motor fan for my 540XL 3S motor. The aluminum heatsink fan replacement is not a bad idea either.
On my Hoss with a Traxxas link and the motor temp sensor connected and working, I'm showing temps that are, in my opinion, way too high at these currently 50-degree outside temps. I think as it warms up, I'll have to go ahead and opt for a protek motor fan. I gotta say, I always order from you guys for my RC stuff, I've been happy with everything by protek that I've ordered, and customer service is top notch. I appreciate you guys, and thanks for the tips here!
Great vid & advice!!!
If this guy stands up and he hasn't got a sling shot in his pocket, I will be very surprised. Good vid cheers from New Zealand.
This guy really know How to quikly name 3 items not so quik
"Top 3 items for your Traxxas"
1 - Money
2- Patience
3 - Tools
4 - Enthusiasm!
hammer
Trashcan
😂🤣😂🤣 🤦🏾♂️ Yeah! I got 2 aluminum fans on my Rustler vxl, it still overheats. I fix one thing on my slash 2wd only for something else to break the next day 😂🤣. But I love the learning experience.
I went with the traxxas fans first on my rustler 4x4 vxl and they lasted about a week. Now I run rocket fans and I love em. They're inexpensive, move alot of air and they've lasted about a year so far.
that wireless module is cool I don't need a cell checker because I am a drone pilot and have many, mabe the gps also thanks Brett'
Awesome! My VXL3s fan just broke on Sunday and I was thinking I need a better fan and don't know what to get. Thx Brett.
You need to get any non-TRX ESC, motor, servo, and radio.
4:16 bruh I check mine a few times a week lol!
You forgot the most important upgrade in that video, the ec5 connectors on your esc, Sorry, i couldnt help myself. Great vid by the way.
Excellent comment, but why not just sell the Taiwanese child labor ESC & motor to some sucker, then replace with some cheaper and superior? Swutadoo! ;o)
Thanks for the info
New friend here. I currently have 2 Traxxas vehicles. I bought the fan for the motor and it works Amazingly. Love the reviews for the Traxxas vehicles. Keep up the great work. I always wondered what the ID did for the Traxxas vehicles. See ya on the next video/review. Be safe.
Happy to hear the fans have worked well for you! Thanks for watching.
-Brett
The ID are the first 2 letters in IDIOT, which describes the people who purchase Traxxas batteries and chargers or any TRX electronics to "upgrade" their vehicle. There are FAR better batteries and chargers and electronics out there for a much cheaper price. Don't be fooled by "branding". This stuff is Taiwanese junk.
Upgraded drive shafts is a must!
Great video 👍👍 I use first and second items shown, Wireless link is really nice you dont realize it untill you try it, Voltage checker is a must have for the person who works on there own stuff, The fans are awesome also but i think Traxxas may have fixed there fans i have not had a problem with fans in quit a while, Motor or ESC both hold up well now....But still great upgrade, amain is awesome 💯
Good video and explanation! 🙂
It's very helpful. Thank you mister giant man boy.
That's so funny! No offense Brett we love you man. Enjoy your youthful looks while you get em!
That would make a good name for a youtube channel!
I get so happy when I see the AMain notification lol.
LOL me too
We all like getting spent online. Lol
the fan upgrade is only necessary if you have cooling problems they are well protected with the fan guards
Number 1 : a receipt
Ture , I had to send my traxxas live charger because it stopped working after a month
Who hurt you?
Lol it’s very rare but ive seen traxxas manufacturing defects and traxxas just basically said f*ck you
Seriously. They are great cars, but I see too many that are faulty. Almost every single one that I owned had faults. I have a TRX 4 that came with a broken esc, that somehow fried my motor. I have another TRX 4 that came with a cracked rear axle housing. Half the time, my charger doesn't wanna charge my batteries. If they aren't faulty, they can be very tough, and fun cars, but too many of them are faulty.
@@gasolinediesel972 agreed and my biggest problem is traxxas just says f**k you like I bought a vxl stampede back in august and the second I turned it on the esc Started smoking and killed the motor and then I put a new esc in and the servo died within minutes and traxxas just told me “it wasn’t there fault” and I could buy the $70 servo and the $200 in a motor and esc
I want that shirt!
Those are not the 3 must have. They are shocks and or caps, hub carrier's, and last but not least hing pins Lol. Now other Traxxas models have other problems as well but that is your standard Traxxas problems and the main ones for the 4 models i have. Just be prepared to upgrade parts right out of the box because Traxxas does not care to fix the flaws in the design.
That’s because Traxxas builds platforms and not finished products. Their whole business is in upselling their upgrades. That’s the whole point of the hobby entirely is to engage RC buyers and users in upgrades and maintenance. That’s half the fun of it all
@@PigglyWigglyDeluxe buying parts right out of the box to make it more durable is not fun. If I pay 500 dollars for a model I shouldn't need to upgrade it. I have been racing my sc6 for about 8 months and my sc5m for about 2 years. They are still box stock. No need to upgrade. I race them every weekend and I have broke a ball stud on my sc5 and nothing on my sc6. Now thats quality to me. Don't get me started what has broke on my slashes and rustler 4x4 lol. Traxxas wants to sell u upgrades out the box Traxxas also wants you to use there chargers battery's electronics etc.. and there over priced as hell. I can buy a pro sc10 that needs no upgrades for 299 or buy a vxl slash for 400 that needs shocks hub carrier's hing pins the skid plate underneath if u didn't buy the platinum one with the lcg chassis. Vxl esc and motor go out all the time. I can go on. I know this from experience. Traxxas is over priced garbage and people love them because they don't know any better
@@PigglyWigglyDeluxe they are finished products thats why there called ready to run lol there not a kit. If it was a kit then it wouldn't be finished like associated or tekno or mugan or tlr etc. Traxxas is a overpriced entry level rtr thats all
Jeff Bryner no, they aren’t finished products in the obvious sense. Think about it like this: A Honda Civic and Toyota 86 (for example) are fully assembled vehicles that are perfectly able to drive on their own and many people buy them that way and keep them that way.
Ask any tuner and they will tell you it’s not a finished product in the sense that the person buying it already had plans to modify it before they even bought it. It’s a platform for their own unique build.
That’s what Traxxas does and that’s why they have a full line of upgrades and accessories because they know their buyers will modify them. No one ever keeps their Traxxas models stock for very long.
@@PigglyWigglyDeluxe lol thats with anything then. I was in the tuner scene before the stancefcrap came around. I own a 07 civic. I had a turbo 2.2l accord. My good friend is Chuck from street outlaws brother lol. Chuck did have a fast ass 93 civic hatch pushing 750 to the wheels. When I buy a car it needs to be complete and ready to go no.matter if I decide to upgrade or not. I don't go to Honda and buy a civic half ass because someone may decide to put a k20 in it with a turbo and rims on it. Honda builds a solid car and doesn't need anything for your average person. You buy Traxxas crap and the average Joe who would drive there civic for gas mileage to Starbucks is now upgrading there civic just to make it to get coffee. What I'm saying is. Having the option to upgrade is fine but actually having to upgrade what u just bought just to use it is bs. If u sell a costumer a product with the intention that they have to upgrade it just to us it to its fullest is bull shit. Traxxas is one big ass marketing scheme. Not one other rc company have I seen be like there are. Maybe horizon hobby with there spectrum/losi products. They are still way better quality though. Traxxas is over priced junk. My vintage 90s rc10t is better quality then a brand new rustler lol I own both so I can compare
Have the first two!...banking on my gearing and driving style to keep temps in check.
Besides, don't want any fans stealing my battery power. Even if its 0.002 v. 😏
Ha! Exactly.
-Brett
Love the channel and all the great information you provide to us all. I am a novice in the R/C hobby. I purchased a used Stampede VXL 4X4. Its an older model and does not come with the new TQI remote with TSM. My question is, if I purchase a new Remote with TQI. Can I benefit from the TSM? Or is that only in new traxxas RC cars? I wasn't sure if its a specific new equipment in the car itself
Hey Joe. That will work as long as you get the TQi receiver with the transmitter. Here is the 2-channel transmitter version: www.amainhobbies.com/traxxas-tqi-2.4ghz-2channel-radio-system-w-tsm-micro-receiver-tra6509r/p453835
-Brett
Thanks bro
Thanks
Very informative movie, but when I saw the topic I just had to come and read some of the comments. The Interweb didn't disappoint. There are so many self proclaimed experts and haters to keep us entertained for life :) Keep on truckin' y'all!
yo what up nigga
Great video..!
But I do not completely agree with your fan mod. By placing a smaller fan into that shroud, you have defeated the purpose of that shroud. You should seal the louvers that extend past the outer edges of that aluminum shroud so you don't get recirculation at the top. The seal will make the plastic shroud more efficient, pulling more air through the heat sink. Also...if the aluminum fan case were the correct height, the aluminum fan case could also act as a heat sink to the heat sink.
I'm not saying that your idea is not working better(can always be tested), I'm just saying it can be even more efficient..! This was still an informative video. I was not aware of the first two products.
Thanks "AMain Hobbies"..!
Epic I’m gonna go buy a charger on amain now
Wow , i gotta get one of those fans
Brett, for the Maxx why didn't you just go back with the Protek 35mmx35mm fan? it clips right in the stock housing no bolts needed. you are correct, they push alot more air, I have replaced the ones in my Maxx and X-Maxx with ProTek RC 35x35x10mm Aluminum High Speed HV Cooling Fan
At the time we made the video ProTek hadn't yet made the 35x35mm fan. But I'm glad to hear it clips right into place!
-Brett
brett thanx..running 3s question is can i use protek fans2112? ur latest vid on esc and motor? called amain told 2s max capacity,want 2 run dual fans.will they handle 3s 4s???do both fans require reversing plug orientation 4 polarity???keep up the awsomeness!!!!!! thanks
No, you can't run the fans directly from 3S (11.1V) or 4S (14.8V) power. They operate at 8.4V max. All you need to do is run the fans from the AUX port on your receiver, and that should provide 6V or 7.4V, depending. Yes on the reversing plug, both fans are the same way. Hope that helps.
-Brett
What's the price for the GPS part of the Bluetooth controller part? Very informative video i appreciate it I'm getting that fan sometime!
The GPS Module is about $100, but buying the expander plus GPS module is the way to go, and it's about $130. This is it: www.amainhobbies.com/traxxas-telemetry-2.0-expander-2.0-gps-module-combo-tra6553x/p873138
-Brett
@@AMain_Hobbies thanks buddy!
I recently seen a video saying one TQi can control all your Traxxas vehicles with the link. Ive only found one video specifically about this. but felt it needed a bit more specifics on this option. Could you do a more detailed video on this option as it seems completely unknown. I'll probably grab a link and figure it out before you get a chance to make a video. But good information for others. Thanks.
Yeah, the TQi has "Model Memory" for up to 30 different models. For more information on TQi Model Memory, check out this Traxxas article: traxxas.com/news/how-to-become-tqi-power-user
-Brett
Hello, can I put the aluminum fan on an xl5 esc then possibly switch it later to the xl3 brushless esc?
You could use the fan with both of those ESC's but you'll need a way to mount the fan. I don't think the XL-5 has a fan mount, although maybe I'm wrong.
-Brett
@@AMain_Hobbies Thanks. I was looking at it and couldn't figure out if there was a place to mount it. My esc gets kinda hot but it's still under warranty so I'm sure it's fine. Thanks for answering!
Can you review the arrma big rock v3 please.
Review: Far superior to and much cheaper than any Traxxas model. Arrma steel driveshafts are better and cheaper, also. Excellent truck man.
I think, if you run Traxxas LiPo batteries, the Traxxas LiPo cell voltage checker should be your #1 thing to get. It is portable, stash it in your pocket, and where ever you drive, you can check your cell's voltages. You can check if you're getting low, if you are getting near storage voltage, have a high voltage, if the batteries have bad cells (over or under voltage). You can also check all your other LiPo voltages because it connects to the balance plug. That's how I check my other LiPo packs.
There is also the Traxxas Link, which I have never used, can anyone tell me how it is?
Aluminum parts can definitely improve the vehicle. I use the aluminum hub bearing adapter in my Slash 4x4. That is the piece thay goes on the clutch in the bearing to the center driveshaft. I also use aluminum hubs, and Pro Line aluminum shocks. Everything else is plastic, so that any damage has a weak spot to go to that is easily replaceable, and won't "shock" the rest of the components upstream.
I have never used fans, although I have considered getting a van for my VXL-3s esc. I have had my truck get very hot, but to preserve my LiPo batteries, I generally don't run in very hot conditions. This is about 95 degrees F and higher.
I also want to point out getting the right charger. Traxxas has pretty much made their batteries proprietary to their chargers. The cheapest unit is $50, which is all you need if you have the cell voltage checker. I wish Traxxas had a display that shows the cell and total voltage of the battery. That would be a great feature that is moronic to not include. That alone makes Traxxas chargers look cheap compared to others. EZ Peak Live is a "solution" to a problem that doesn't exist. Ideally you would be monitoring your LiPos if they are charging. So you can easily look at the charger to see the display, without having to use your phone.
Do not purchase any TRX electronics. They make plastic; NOT electronics or batteries. That stuff comes from Taiwan!
man i saw u on a old race.....i was actin like a big kid
Can you plz review the rc10t6.1
Bret, at AMain Hobbies
As far as the battery tester goes I recently got a TRX 4M and the battery has kind of a T-shaped plug, how can a guy use the tester on that style battery?
Do they have a female T-shaped connector to a male input that will plug into the tester?
I purchased the tester and extra packet of connections with my Hoss from you guys last year and I thought that the extra connector packet was supposed to take care of all the Traxxas batteries but I'm at a loss to know how to test the little 4M batteries.
Thank you for your time John C
Hmm, interesting. The TRX4M battery has that unique plug which doesn't easily plug into the cell checker. I'm not what a good solution for that is. You might want to give Traxxas a call and let them know you bought the tester with the adapters and see what their recommendation would be. Maybe they make an adapter for the TRX4M battery? Not sure...
-Brett
GOT 2 OF 2112 FANS THANX 4 STICKERS!!!! ANY THOUGHTS ON USEING XTRA POWER PORT ON ESC LISTED 4 LIGHTING OR ADDED COOL. 2 POWER A 3RD FAN ON STEER SERVO,RUNNING XMAX 2085X..WITH TEMP GUN HOTTER THAN MOTOR..REVERSE POWER LEADS AS OTHERS TOO?????????THANK U 4 ALL UR HELP!!!! U HAVE GOTTEN ME MORE INTRESTED IN RC..HAD M41 CAT,MAXX 1ST LAND RC HAD TONS OF FUN!!!MECHANIC BY TRADE LIKE 2 TRICK AND CUSTOMIZE..,.THANX!!!
Glad it could help Douglas! For the plug on that Traxxas ESC, i'm not sure that is the best place to plug in your fan. Ideally, you'll want to plug the fans into the receiver under the AUX port, so the fans will always power on and off with the vehicle. For a two fan setup, check out this Y-Splitter: www.amainhobbies.com/western-robotics-6-servo-ysplitter-extension-wrl-yexten/p193542
If you use the extension wire included with the fans, you do not need to switch the power wires in the fan connector. If you do not use the extension, the wires need to be switched like we showed in the video.
Hope that helps!
-Brett
@@AMain_Hobbies thanx
How long do you have to wait after charging Lipo batteries before you can plug them into the RC car ?
Depends on what battery and charger
Once your LiPo's are finished charging, you can immediately go play! There is no need to wait after charging LiPo batteries.
-Brett
Hey Bret, do you recommend the cooling fans blow on, or away from the electronics?
My esc used to hit the thermal limit after a few min of speed running, i put my fan on blowing onto the esc, can run out a full 5500mah 3s without hitting thermal limit
It's best to have air blowing on the electronics.
-Brett
Got the bandit and realized that traxxas thought it was a good idea to not put bearing on the caster blocks both front and back…
I mean… it works and it has little friction but damn… that’s a must have if you want your car to last…
Can you review a fan that will fit a traxxas slash/ rustler/ or bandit
Are you looking for a motor mount? We probably have a mount that will work for you.
-Brett
AMain Hobbies would love to see a video of it
What is the purpose of reversing the wires? Is it for the direction the fan spins? Or will it fry if not reversed?
The fan was intended to be used with the included extension wire which reverse the wires for you, so if that isn't used, you need to reverse the wires.
-Brett
Will the link module work if I have a Hobbywing ESC and motor?
Would insta-cure plus work on aluminum
Where can I find the nuts and bolts for the fan ? Part number ? Thanks
Here is what we used: 3x18mm screws: www.amainhobbies.com/protek-rc-3x18mm-high-strength-socket-head-cap-screws-10-ptk-h-1208/p141681
3mm locknuts: www.amainhobbies.com/protek-rc-3mm-high-strength-nylon-locknut-20-ptk-h-5200/p141792
-Brett
I need that fan...
What’ do you guys think the next ARRMA RC or TRAXXAS CAR will be?
Will this work on my 1/10 scale car for my brushless 540 motor to replace my fan upgrade?🤔
Yeah should, as long as the mount fits a 30mm fan (30x30x10mm)
-Brett
@@AMain_Hobbies thanks for the reply, I have my amg Mercedes from kyosho, but to save money on upgrades, I saw your video review, I always love speed runs, this is the best tourcar up to date.😎
I am curious if it would work if I changed servo? I am willing to keep stock esc and motor for now. but servo is terrible on xmaxx. Thanks
Upgrading the X-Maxx servo is a great upgrade idea. If you want to use the common standard sized servo, you will need this adapter: www.amainhobbies.com/traxxas-xmaxx-maxx-xrt-standard-servo-adapter-tra7749/p512518
-Brett
Can I bind one TQi with the wireless module to a TRX4m, set my endpoints, then rebind the original TQ transmitter and keep those endpoints??
No, I don't think so. That adjustment is saved with the transmitter, so when you switch back to the TQ, the data in the TQi doesn't transfer.
-Brett
@@AMain_Hobbies well, y’all did show us how to bind multiple Traxxas vehicles to one transmitter. I will do that
Hey AMain Hobbies Where did get us for protek esc fans it is possible my x-maxx esc???
That might be possible but we have not tried it yet. If you need the Traxxas fan, it is this: www.amainhobbies.com/traxxas-velineon-vxl8s-cooling-fan-tra3475/p628260
-Brett
Anything I should get for my Ultimate? I just ordered it.
Congrats on getting that truck! It already comes with a lot of nice upgrades. I would only recommend RPM suspension arms once the stock ones break over time. And then just have some nice tools, maybe a car stand and a pit mat. Have fun.
-Brett
thanks Brett
Ya guts are great!! I buy everything from ya NYC!!!!
I use the link is a must have for speed control and receiver updates too
Traxxas made an error on the back of the TQi radio. Simply by removing the sticker from the back, it says “enabled”, leaving someone who gets it and doesn’t know thinking the module has been installed already. When it should’ve just said, well, anything else. Best would be “open to insert module No. ****” as I just bought a radio from a well versed and experienced seller on the ‘Bay who before purchasing, I asked since he said it was enabled, if indeed it had the module. As far as he could tell by looking, it must’ve because it said “enabled”, yet upon receiving the radio and receiver, there was no module installed. Was this his fault? Maybe, it’s only one screw away from realizing. But he sees enabled so if you’ve no experience with that certain unit, one would be inclined to think the same. Anyway, that’s my 2c.
The best upgrades are all the electronics, tires, steering bellcrank, & get mip cvd’s!
On which car?
Slash especially but hoes for most traxxas stuff
I think the 2wd slash is the best & most versatile rc car on the market, can be made to race anything
@@jeffro0090 The 4x4 slash is way more durable. I had a 2wd, thing was constantly breaking. Have had a 4x4 for over a year. Replaced the shock caps to aluminum, a few spur gears, the factory vxl motor lasted almost a year, bearing went out. Driveshafts lasted a year as well. My main basher so it gets beat through everything, weather wise
Jeff Montague I agree
How do you change to Proline Badlands tires in the app? I only see Traxxas branded tires.
They probably don't have Pro-Line listed. In the app, you might want to select Traxxas tires that are the same height as the Pro-Lines. The height info is what the app wants, to calculate tire roll out and calibrate it for an accurate speed reading. Hope that helps and makes sense.
-Brett
@@AMain_Hobbies I didn't know if the stock X-Maxx tire setting (default) allowed for some of the ballooning. The Badlands don't balloon hardly at all. Thanks for responding. I'm probably going to get a GPS speedo eventually anyway, which is more accurate and doesn't care about tire size. 👍
@@CameronMaser You're exactly right about that. GPS doesn't care about all the little details; the speed is the speed. Have fun!
-Brett
Amazing
Just did the same exact fan upgrade and followed the steps, fan is not working at all...? Any suggestions?
Nevermind, just swapped the wires around and it's working now. 💪
Glad it's working for you Henry! Let me know if you have any troubles.
-Brett
What 4s battery would be best for my maxx I want the most power n long run time
If you are looking for the largest Traxxas 4S LiPo, it will be the 5000mAh pack; this one: www.amainhobbies.com/traxxas-maxx-4s-25c-lipo-battery-14.8v-5000mah-tra2889x/p768332?r=0
-Brett
GensAce 8500mAh 4S lipo. It fits in the tray no problem. Last forever, but also takes a good long while to charge because of the enormous capacity. $100+ battery, so it’s pricey
I got an HRB. 6000mah 4s. Gives me plenty of run time and it was about $65 on Amazon. One downside is that the battery hold down doesnt work but I have thought of getting a velcro strap from Amain and getting rid of the plastic hold down
I cant keep axles from breaking in the hoss
I have the traxxas link stuff and I dislike it. Updates take forever and sometimes fail. It is rough.
How would you switch out the fan for a Slash?
If there is a mount you only need to remove the current fan and replace it. Does your truck have a fan mount?
-Brett
I have the traxxas VXL-3s Ford Raptor running a 2s what can I do to make my truck better than my friends VXL-3s 2s rustler?
Gearing, bigger battery, esc fan, 100c 3s lipo.
Gears are cheaper than new batteries though, hot racing makes a lot of different 32p steel gears. Ceramic bearings, turn off training mode of you haven't already, depending on how/ where you drive belted tires are a great upgrade too, the possibilities are endless. But gearing makes a big difference and it's cheap and easy
@@justinmetcalfe2669 I am running 23/86 and training mode is off.
@@justinmetcalfe2669 Would you recommend getting a Traxxas battery or an off brand battery and just soldering new connectors on? and I run it either on loose dirt or pavement.
A 3S LiPo battery will make the biggest difference to power and punch, possibly even more runtime.
-Brett
The MOST important thing i think you could of added was getting a set of good quality Allen screw drivers working with the L shaped ones make it not fun to work on and is just painful working on them for long periods
Holy crap you’re so right! Once I bought a basic Dynamite kit all of my work became smooth and so much simpler and faster!
@AMain Hobbies will the fan fit the e revo2.0
Yes it will. It will need to be secured in the same way demonstrated in the video.
-Brett
Re stock your online vehicles! Trying to get a mini e revo damn it
7 months later now, did you get that mini e revo? How do you like it? Vlx brushless?
@@tenncutt I just got one the other day and I'm loving it over my Revo 3.3, might even sell the 3.3 to get a 1/10 slash vxl 🤘
Will this work will VXL-3s ESCs?
Yes, but you’ll need the mounting bracket first. The fans are the same size
Do you ship to India,please reply?
Yes we do ship to India, but we cannot ship hazardous items.
-Brett
I simply don’t understand why a battery checker is so important. Seems pretty simple to me. Balance your batteries when charging and store charge them when not using. When they die don’t leave them dead...Who needs to check their batteries more than once in a lifetime unless you just leave them laying around at random battery levels
After a bash day out, I’ve got multiple batteries that are dead and multiple batteries are charged. I can never remember which are which. And i am aware that there are better ways like the charge indicators that plug in the lead.
We do the same thing when we need to organize LiPos. Sometimes it's hard to remember what you used and didn't.
-Brett
I don't even own an RC car but now i want to buy the parts.
You should, then build the car around them!
Also must have 8s esc warranty
Funny all the manufacturer defect and malfunctions are rare. But they do make a product for it and they do happen.
Trying to fit that fan on blx185 esc.. Don't think it's happening 😢
Hmm, not sure about that one. It looks like the fan shroud unscrews and pulls up in the same way as the Traxxas. Should be doable?
-Brett
@@AMain_Hobbies thx for the response, but no the shroud on the blx185 holds the fan, then 4 screws go through the shroud/fan holes and screws into the heatsink. I tried squeezing the protek fan in between the screws but it's slightly off. Gabriel Yvon on facebook if you'd like to see some pics. Cheers!
@@AMain_Hobbies alot of my fans ended up being 35mm. Hobbywing Max6 esc fan, blx185 fan, xmaxx motor fans.. I'm in for about 10 of em if protek would make some 😉
@@gaberealrc7355We're going to work on that.
-Brett
I just got a Traxxas maxx and for some reason at high speeds the whole car starts to wobble, does anyone know why it does that
The TSM gyro knob is turned up too high.
-Brett
Hey!! Can someone please help me I bought a T-Maxx 3.3 and right out of the box it has a air leak i’ve checked everywhere i can’t find it is there anywhere i should look? i’ve checked all the simple areas fuel line, Gas tank and gas tank lid and o ring idk where else to check i’m new to nitro if anyone could help thank you :) (For the curios ppl, i don’t wanna take it back unless it needed i think it’s gotta be something small i can fix i hope)
exhaust pipe. head or cylinder bolts loose. glow plug loose. fuel intake loose.
not to be an ass but that truck is a money pit and will make you go mental. The worst truck traxxas ever made.
RC reparts I’ve noticed everyone has told me it’s terrible i have a old 14 T-Maxx 2.5 it’s still running so i figured why not get another nitro so i got the 3.3 and it’s terrible love it but terrible
@@anthonyrizzo255 Nitro is very high maintenance. all them servos and fuel and glow plugs. Not to mention the mess it makes out of the trucks. I prefer electric they are so much cleaner, faster, lighter and easier to maintain.
RC reparts Yup electric is better I love them and they are more cost effective overall better than nitro RCs but you still gotta love the sound of a nitro lol i’m probably gonna take the 3.3 back for a electric equivalent or something that’ll drive out of the box loll
Hi miss you
Don't ask me why I'm watching this Amain videos vent though I don't have a Traxxas and don't plan on getting one anytime soon...it's uploaded by Amain so it has to be at least a bit interesting, right?
Have it can't get it to connect
Does anyone know if these fans also work on an Xmaxx?
No, these 30mm fans are too small; the X-Maxx uses two 35mm fans, so you'll need two of these: www.amainhobbies.com/ecopower-35x35x10mm-aluminum-high-speed-hv-cooling-fan-silver-black-ecp-7001/p1287735
-Brett
@@AMain_Hobbies Thank you for clarifying. Same screws?
@@mezzyshredder Hmm, not sure on that. I imagine the same screws will work but not 100% on that because we haven't tried it before.
-Brett
I thought the speed and all the extras were already there when you add the TQI module. Kinda sucks you have to buy each extra option. Traxxas, you damn business geniuses making us spend our money. Lolol
👉🏻👍🏻
Man, u look just like John c Reilly