DIY Screen Stretcher for well under $100
Vložit
- čas přidán 22. 08. 2024
- This is just a (not so) quick video showing my DIY screen stretcher that I threw together with some old scrap wood and some simple hardware.
Disclaimer: This video or video description contains affiliate links. That means that I am awarded a small commission for purchases made through them, at no added cost for you.
Clamps: amzn.to/3SeCZHI
Inserts: amzn.to/3EMB7TB
Threaded Rods: amzn.to/3EM5edF
Knobs: amzn.to/3EPmQ8t
End Caps: amzn.to/3EQnu5U
Glue: amzn.to/3MBsNId
Screen Mesh: amzn.to/3smfhyZ
Better Knobs: amzn.to/3MKJyAO
Thank you
I made mine, was great love it. You saved me couple of hundred dollars thank you
Glad I could help
I built one of your stretchers and it works great. I do use contact cement instead of the glue you use. I also will try stretching the first two sides instead of hand tightened but haven't done this yet. Thanks a bunch. Great design.
I'm so glad to finally hear from someone who built one. Please let me know if you have any other tips that might help me improve my design. Happy printing!
Thanks for this information. I like the idea of pushing the frame instead of pulling the mesh.
Thanks for watching. This was in my first few attempts, I have gotten more efficient and it really does work well. Check out this for a little more info. czcams.com/video/X6SX5PPpFVM/video.html
I built a screen stretcher based on your ideas. I just finished it yesterday and am loving the results.😀 One variation on mine is a lazy Susan mount, which makes using it very easy.
Glad to hear it was helpful!
Whats a lazy suzie mount ?
மிகவும் அருமையான ஒரு முயற்சி. இதை மக்களுக்கும் காட்டியதற்கு மகிழ்ச்சி. கடவுள் உம்மை ஆசீர்வதிக்க வேண்டுகிறேன். நன்றி வாழ்த்துக்கள்
Thanks, and good luck to you!
You are amazing my friend. Truly incredible and especially for someone whose native language is not English.
a thumbs up and one more subscription.
Patrick
Thanks so much for the kind words. Hope it was helpful...
Nice desing, I'gonna try that, Greetings from Oaxaca México.
Thanks for watching. Hope it works well for you!
Nice job. It's a very simple setup jig but very effective! Thanks for sharing it. I have to try that on my next project! Cheers!
Thanks 👍
this is so helpful. thank you. as far as glue goes. you should get the “thin” version of superglue. and also get the accelerator that goes with it. then you will have instant cure of your glue.
Thanks for the idea. That is in fact what I am currently using. I have posted an update to my channel. Thanks for the tip and thanks for watching!
Simple but very nice very great
Thanks a lot 😊
Great idea! Thanks for sharing!
Hope it was helpful, thanks for watching.
Nice great idea i will build this one too hope it works for me just like it did to you thank you for this brilliant idea
Good luck!
Gracias amigo sencillo pero efectivo tu idea Dios te bendiga
Thanks! Hope it was helpful!
Muy buena forma de tensar la malla, antes de tensar con los tornillos, yo le hago una cruz en el centro de la malla de 20 cm y al terminar me fijo cuánto se ha agrandado los 20 cm. Si se agranda un 4% a5% de su tamaño original tiene los suficientes newtons , te felicito muy buena forma de tensar 👍👌
Super helpful video
viewers: change playback speed to 1.75
Glad it was useful. Thanks for checking it out.
Thanks bro
Good job
Thanks
Excelente buen video
Muchas Gracias!
did you ever find a glue adhesive alternative?
I did. This got me about 20-25 screens.
www.screenprinting.com/products/ryonet-screen-glue-kit-w-1lb-adhesive-8oz-activator
Also here is an update on this video that might help you out: czcams.com/video/X6SX5PPpFVM/video.html
Hi my friend! What are the screen frame adhesive? I need it. Thank you !
www.screenprinting.com/products/ryonet-screen-glue-kit-w-1lb-adhesive-8oz-activator
Also here is an update on this video that might help you out: czcams.com/video/X6SX5PPpFVM/video.html
Pro
Thanks, hope it was helpful!
What size is the threaded insert and how exactly do you install it?
Link to all of the hardware is in the description. It has a hex head and you just drill the hole and then screw it in with an allen wrench. Goos luck, hope this works as well for you as it has for me.
👌👌👌👌🌷🌷🌷
Hope it was helpful!
Interesante
Thanks for checking out my video!
كيف يمكنني الحصول على العرض
Links in description...