How To Replace Headlight Assembly 2007-2014 Cadillac Escalade
Vložit
- čas přidán 20. 10. 2021
- Buy Now!
New Headlight Set from 1AAuto.com 1aau.to/ia/1ALHP01210
Over time, headlight lenses become dull and hazy. You'd be surprised how much that affects your night time visibility! Replacing your headlight assembly is an easy way to improve safety and appearance on your vehicle. This video shows you how to install new, quality, TRQ headlight assemblies on your 2007-2014 Cadillac Escalade.
• Check here for more videos on the 2007-14 Cadillac Escalade: • Cadillac Escalade 2007...
This process should be similar on the following vehicles:
2007 Cadillac Escalade
2008 Cadillac Escalade
2009 Cadillac Escalade
2010 Cadillac Escalade
2011 Cadillac Escalade
2012 Cadillac Escalade
2013 Cadillac Escalade
2014 Cadillac Escalade
Tools you will need:
• Pry Bar 1aau.to/oac/1AXAA00020
• 10mm Socket 1aau.to/obE/1AXAA00017
• 22mm Socket 1aau.to/ov/1AXAA00266
• 7mm Socket 1aau.to/obE/1AXAA00017
• Trim Tool Set 1aau.to/oas/1AXXX00006
• Ratchet 1aau.to/ocA/1AXAA00016
Subscribe: / @trq
Check out our playlist:
Cadillac Escalade 2007-14 3rd Gen: • Cadillac Escalade 2007...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravní prostředky
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts
√ *Do it Yourself*
√ *Save Money*
That's a jump cut. Headlight doesn't slide in that easy
I like how they edited out the struggle of getting the light assembly in and out.
Thank you for the quality video, no crazy background music or annoying dribble just a high quality video with concise information.
Please note and edit this video, the lower tang (in the fenderwell) on the headlight module was reinstalled on the wrong side of it;s support bracket. The bolt was replaced and tightened against the bracket only, the headlight module support tang was behind the bracket and the lower part of the tang was bent perpendicular to the bracket by the tightening bolt. This is all quite visible if the video is watched on full screen. TRQ, you might want to retrain both your installer and video editor. IMHO
Love the headlight aim addition at the end.
Thanks for video. Its helped me.
Excellent
Bottom bolt was not aligned correctly
Looks nice where you get the grill and how much you pay
So why are people taking off the front bumper?
Obvious edit at point of pulling it out.
Mine was impossible without loosening bumper cover to fender attachment.
Exactly!! I had to loosen front bumper assembly.
I tried to do this following the instructions in the video but the headlight assembly will not pull out. I removed everything just like in the video. I then removed the antiquated battery tray, the windshield washer solvent bottle, loosened the bumper, grill and fender and it still won’t come out even with some gentle prying. I’m an experienced mechanic and I’ve never had such a difficult time replacing a burned out headlight. I’m about ready to break out the BFH. When you slid the headlight assembly back in you missed getting the bottom into the proper location. It went behind instead of being on the outside where the bolt could be installed so it would clamp down with the washer and hold it in place. Your bottom bolt was doing nothing to hold it, at best it would help with the alignment for the proper location.
So how’s the fitment? Since the video fails to show a final product.
BEST ViD On You Tube On The Caddie Head Lamp Removal ❤❤
Done but I hate removing these headlights lol
This youtube video titled: "2008 Cadillac Escalade Ballast Completely Eliminated, Watch". This video that I made days ago, will allow you to totally Eliminate the ballast. You can also Google the title.
It's not as easy show how you slided out without cut in video.
Crazy that you just cut the hardest part out, getting the headlight out. Why??????
Why didn’t you show the full video you taking off that cover and all that extra grill pieces
Why did you cut the video at the part where the headlight actually comes out? Does it come straight out or do you tip it one way or the other? Also, how hard do you have to pull to get it out? Very disappointed I wasted my time watching this.
bro, you completely put the bottom bolt in with the headlight tab on the wrong side of the nut, lmfao wow
Yall need to show the real way to do this because you have to remove the front bumper on these vehicle's
You cut the part that we probably need to see the most. If you had a hard time with it, we're going to have a hard time with it. WTH