If you dont wanna modify gun in anyway this is might be good. But if you want change steel barrel, mk18 rail or any other upgrade...its impossible or just pain in the ass. I just wish i can return this gun and buy TM mws and build gun what i like. Anyone interested to buy double eagle noveske?
Hello, I have a problem. I have the Noveske DE with angrygun nozzle, stalker CHop rubber and omega nub. It seems that in some shots while performing the cycle it does not complete and does not extract the ball from the original MWS magazine and on the next shot it expels all the gas. Would you know what it could be due to?
I noticed doing mine that the hop arm sits in the receiver underneath a little arm, sometimes when putting the barrel back in it can miss the arm then it’ll give you no hop whatsoever!
I had an issue with mine from new. Very little adjustment on hop wheel, and it didn't seem right. Turns out my hop unit wasn't assembled correctly from factory and the hop up arm was underneath the adjustment wheel as apposed to on top. Rectified it and fitted a titan nub and flamingo at same time. But QC obviously wasn't tbe best on mine
There are two versions of this gun one is N4Double Eagle and the other is Sima n4 without markings so it's question what's your gun is they not same!!!!🎯
Mine is overhopping 32s with this nub and rubber combo. I have significantly more movement in my hop arm than that. Ive chucked the standard nub in for mo, gonna switch back to titan when i switch to .4s and running a npas
Yea, I've installed the titan nub and flamingo bucking and the arm is actually really loose... Haven't tested it properly yet, will do that this weekend.
There are two versions of this gun one N4DoubleEagle witch is this gun,but the other is Sima without markings and they are not 🚭 the same people!!!be careful what baying🎯
I thought I was going insane when I was over hopping 32s on 0 hop yesterday. I find the mags supplied are really inconsistent too - sometimes it shoots straight and sometimes it doesn't seem to have enough power. Tried with mates marui mags and 0 problems. Any ideas or just grab marui mags?
Just hop rubber nothing more is it yours Sima or N4Double Eagle this two are not 🚫 the same bat they said they are they're absolutely not 🚫👎!!!N4DE is better 👍
@@MrMi123456789 I had to buy a new standard tm mws hop adjuster set up mine had some how split in half even though it was brand new work all good now tho along with a laylax hop arm
N4DoubleEagle is better and don't need enithing from the box is perfect hop rubber you can transfer bat you don't need enithing new on this gun she's beautiful,no nub or enithing nided guaranty you will break her that way🎯
Your MWS series is a godsend to a first time GBBR user. S-tier content covering this system.
Ita been a god sent guide for me aswell
Bless this man
Just bought the Titan nub! I didn't know about it but I already have the Flamingo rubber so no reason not to. It's a novel design!
No need just rubber bat that's not need that either you will break her that whay,this way from box is indestructible
Hey is there an easy fix on the ccw thread barrel? Mine came with orange tip and I stripped it with the grub screw still intact.
Received, I will provide the video to the engineering staff tomorrow
If you dont wanna modify gun in anyway this is might be good. But if you want change steel barrel, mk18 rail or any other upgrade...its impossible or just pain in the ass. I just wish i can return this gun and buy TM mws and build gun what i like. Anyone interested to buy double eagle noveske?
@@plixplaxplox1609 But we have plans to launch a complete gun with a mil sepc receiver.......
Still waiting on my DE sponsorship 😅
@@Jaeger-Precision new porduct on
the way
Why cant you fit mk18 barrel?@plixplaxplox1609
Hello, I have a problem. I have the Noveske DE with angrygun nozzle, stalker CHop rubber and omega nub. It seems that in some shots while performing the cycle it does not complete and does not extract the ball from the original MWS magazine and on the next shot it expels all the gas. Would you know what it could be due to?
What flash hider did you had on at the beginning of the video?
where did you get the Warden from - Was that a WGC/JKarmy purchase ?
I noticed doing mine that the hop arm sits in the receiver underneath a little arm, sometimes when putting the barrel back in it can miss the arm then it’ll give you no hop whatsoever!
I had an issue with mine from new. Very little adjustment on hop wheel, and it didn't seem right. Turns out my hop unit wasn't assembled correctly from factory and the hop up arm was underneath the adjustment wheel as apposed to on top.
Rectified it and fitted a titan nub and flamingo at same time. But QC obviously wasn't tbe best on mine
There are two versions of this gun one is N4Double Eagle and the other is Sima n4 without markings so it's question what's your gun is they not same!!!!🎯
It's double eagle...
is it compatible with orifinal tokyo marui hopup?
Restock date on the PMag Easi loaders???
is a normal MWS hopup arm would make a difference?
I recently picked up one of these rifs
Im looking to put a npas in it
Do you have any recommendations on which would be the best option
watch the DIY Npas video
Mine is overhopping 32s with this nub and rubber combo. I have significantly more movement in my hop arm than that. Ive chucked the standard nub in for mo, gonna switch back to titan when i switch to .4s and running a npas
Yea, I've installed the titan nub and flamingo bucking and the arm is actually really loose... Haven't tested it properly yet, will do that this weekend.
@@MrRiingo let me know
There are two versions of this gun one N4DoubleEagle witch is this gun,but the other is Sima without markings and they are not 🚭 the same people!!!be careful what baying🎯
Hello, can you provide a link of where you bought the flamingo and titan hopup arm?
Empire airsoft👍
Is it shooting within Dutch daft limits? 350fps 1.2J, absolutely unimaginable. If not, how can I tune it down? Will RA-TECH NPAS work?
I’ve tried using a RA-Tech npas for my Noveske and it just doesn’t fit inside the bolt carrier it’s really tight
I have the warden blast with built in tracer unit :)
I thought I was going insane when I was over hopping 32s on 0 hop yesterday. I find the mags supplied are really inconsistent too - sometimes it shoots straight and sometimes it doesn't seem to have enough power. Tried with mates marui mags and 0 problems. Any ideas or just grab marui mags?
General consensus between the chaps I've spoken with have all said marui mags perform better.
@@maxpayne98383 yeah, they seem it, got 5 of the DE ones so am desperate to try make them work instead of forking out for the marui ones haha
Just hop rubber nothing more is it yours Sima or N4Double Eagle this two are not 🚫 the same bat they said they are they're absolutely not 🚫👎!!!N4DE is better 👍
P mag also should work,am just watching video
@@vladimirsamardzic963 I have the N4DE yeah, with 5 DE mags. Just keep having problems with the mags, the gun is perfect
You see I’m also getting an issue that when I shoot my hop adjustment slowly changes so I can’t get consistent hop
same you got any fix for that?
@@MrMi123456789 I had to buy a new standard tm mws hop adjuster set up mine had some how split in half even though it was brand new work all good now tho along with a laylax hop arm
@@chasemartin2555 thanks!
@@MrMi123456789 all good
N4DoubleEagle is better and don't need enithing from the box is perfect hop rubber you can transfer bat you don't need enithing new on this gun she's beautiful,no nub or enithing nided guaranty you will break her that way🎯