I would like to see them make a compact model. I would love for them to do the Honey Badger. C&C Tac do a honey badger kit but its expensive and hard to find.
My favourite Airsoft related channel 😎. Go ahead James 👊 I’m learning a lot watching your videos. Thank you ! Just want to leave my experience on my perfect combo with hop up on my MWS platform. On 2 of my 4 I’m using laylax arm with modify hop rubber (the tan for vsr) and laylax hop arm with nineball purple hop rubber. Lifting 0.30/0.32 without any issues. The other 2 are completely stock at the moment. But I like your combo as well. I’m gonna try those flamingo hop rubber if I can grab one
Would like DE to make a sbr from strike industries, telescopic stock and their flash hider opressor combo. Sai gry with gold bolt are also nice. Also to be cross compatible (same spec) with their lowers, and sell complete uppers with different setups, rails etc.
I know I’m late here but I’d love to see uk KS-1 or the sig spear LT as a complete MWS system clone. I’d love to see them offered in different lengths too
Kept checking every hour for this video 🤣 watched it as soon as it came on. Bits ordered for mine now. De actually need to learn to answer emails. I’ve sent them a couple now but so far been ignored. I have a bit of wobble in my magwell , more than yours .
Thanks for following up on the magwell check! Your's look way more like a regular TM MWS magwell. Seems the TWG version was an early batch or something, as I'm not alone with the issue. Anyways! For anyone with a EU / TWG Version. Check your magwell play, shim if needed, and save a nozzle :) I can also add that the TWG version comes with a innerbarrel that goes all the way through the outer barrel and shoots hot. Finally. Double Eagle should make a MXC Spear LT thank you very much
This is Taiwangun's answer why EU version looks different than the one sold in UK: "Thank you for the message. DE does not have a license for selling some parts on EU market"
I think it'd be cool if DE made something different. Maybe something far from the mk18s, the geiselles and all that. Barrel shorter than 10inches. Daniel defense, noveske, there's plenty of choices. Hell, actually some Strike Industries stuff would be awesome I really hope they can make those uppers and lowers cross compatible with marui, tho
I'd like to see some Aero Precision style receivers and handguards. For me they're one of the best bang for your buck companies manufacturing all around AR and general rifle components. I've built multiple real ARs from them and I think they'd sell big time based off the numbers they've had over the years.
Good evening, Al's First of all, I would like to congratulate and thank you for your great reports. I need help with the EMG/DOUBLE EAGLE NOVESKE. The GUN is new. I just swapped the bucking. Since this procedure, the original mag. and also two Lancer L5 AWM 30 BBs gas magazine for M4 MWS GBB - EMG/Cyma are empty after 5 to 6 BBs. Best wishes from Vienna
Wonder if you can help I have this rifle and I do have the stock hop unit I’ve tried upgrading the rubber to a maple 🍁 but for some reason when I slide the hop unit back in the hop unit goes tight and the arm don’t move have you experienced this any help would be appreciated thank you 🙏
SUPER IMPORTANT. I JUST SMASHED MY NPAS!!! MAKE SURE IF YOU PUT THAT O RING ON THE OUTSIDE OF THE HOPUP UNIT THAT THE UNIT SITS PROPERLY IN OUTER BARREL. It doesnt seem to do so with plastic stock chamber. I just upgraded to a CNC chamber. And as it wasn't seated due to that o ring it smashed
Question for any experienced techs; What exactly contributes to the "MWS magic" that so many people talk about, where MWS guns are wildly accurate and consistent out of the box? Stripping away all the extra stuff, if you wanted to get similar performance out of something like the DE rifle, would it be as simple as swapping the barrel and hopup components to TM stuff? Or is there a whole slew of parts that contribute to their performance?
I really like the mxc kit airsoft artisan is working on, would not mind one from double eagle. Only reason that I will not buy the N4 is the noveske branding, and to cheap to buy new lower, upper and handguard.
My mag well is that tight I have to open the upper to install the airtac adapter. Installing a 350mm inner, it runs flawlessly at 60psi, but they want higher pressure to sound less springy. I’m going to cut it to the end of the outer, and then it should run happily at 90psi and run better. The standard bucking and nub are trash, I put a mr hop and omega on and it’s perfect.
Hey man, I got mine and the MWS magazines are very loose, also the double eagle magazine is loose as well. But I fixed the problem with some Velcro type in the front of the mag well. Before I did this, I have already broken two nozzles the original one and one from guns modify because the magazine would drop and the BB follower will catch on the top of the bb and will not push the bb into the hop up chamber, and it will cause to the nozzle to strike on the top of the hop up chamber.
Got mine today, shooting .28 bb and it doesn’t shoot far at all it’s ridiculous. I’m not sure if I’m missing something here? I adjust the hop up entirely and it works for a shot it looks like but then drops very low
I think it would be very cool to see a challenge kit or something for a lower price where you get the rifle minus the handguard, grip, stock etc so it's a base gun. I'm not a fan of the noveske styling so a regular m4 carbine would be great so we can have a great MWS clone build starter in the USA
I think when the hole in the upper for the pin is drilled it is paired with that upper and lower to allow for tolerance variances I had to have a new lower on my MTW 9 got it back the rear pin was too tight had to send it back to get it reamed to fit
Got the gen3, with black bolt and 270mm inner barrel. Had already bought a 250mm maple leaf crazy jet 6.04, flamingo 60, JP titan nub for mws.. Haven’t gotten the nub yet.. but so far it doesn’t grip the bb, and arm is not straight, abit down on the outside of the hopup house.. I’m hoping the JP nub will solve this issue
Just before 13:52 you praise the laylax 250mm barrel for use with your AKM, could I ask what kind of performance benefit you got with that over stock? I've got a BBF hop arm, omega nub and a MR Hop bucking in mine (Which I'll be changing to a flamingo). I am slightly worried for joule creep, wanting to get all the accuracy and range I can get out of it since it's so fun to use
So question, I just picked one of these up and realized that the hop up is crap. So if I upgrade it, it can use ANY mws HopUp, Barrel, and Bucking? Just confirming, I bought this for that reason but before I spend my money I just want confirmation.
Hey Jaeger, there is 2 models from the Noveske, 1 comes without the bullet window DE mag, and one with. The one you have is aimed for non EU market actually, its mainly sold in Japan,China,Hongkong as you look up on Thaiwangun the Noveske model is different, just like in any EU website its the same. If you look outside of EU they're all with a nicer stock, and mag as well. So it might be that it's a different batch and tighter magwell. Because my friend broke 2 Nozzles by using T8 mws mag in the EU model with extra wobble. (the ''EU'' DE mags are quite big from the upper side of the mag, and they do not fit into the TM MWS either, but the ''OUTSIDE EU'' mag with windows in does fit into the TM MWS.
If they want to sell alot it's not easy, but i would say MCX or Rattler , Geisele mk4 ( hrt ) with the black and green... mk16 could be a option but nearlly all of us already have a mk16...😅
Hi There, Hope you're well, I bought one of these from Taiwan gun and it seems to have came with a 270mm inner barrel however its firing around the 1.5j mark with UK retailers selling them with 150mm inner barrel. This is a problem for me as all Airsoft RIF'S in Northern Ireland have to fire below the 1j mark. Would you have any idea what inner barrel length I should get to fire around the 1.j mark? Any help would be greatly appreciated. Thank you.
@@Jaeger-Precision no worries, I got your very low nozzle and titan nub hopefully that sorts it out. Knowing my luck if I got the low variant with the barrel length I'd probably be chronoing at 1.1 😂😂 Thanks for the help.
Hello mate I just brought one of these guns from your old friends and would like to know is it possible to change the mag release for an ambi one? Cheers
I posted online about the barrel length, mine was 150mm and shooting 1j but others was saying that theirs is much longer and shooting hot. Perhaps it’s the difference between Japanese and European versions?
plese de make a carry handle ar like the colt m733 on the mws system. there are currrently very limitted options that are very expensive for the mws platform to get something with a carry handle. also retro ar's are very popular right now but the price of a retro mws is the same price as buying a brand new vfc with a full set of mags!
You have the second/different version as mine is a few months old, and I got it from Taiwangun, longer inner barrel shooting 370 FPS on 0.20 BBs, mags are a tight fit no wobble, different mags.
This is Taiwangun's answer why EU version looks different than the one sold in UK: "Thank you for the message. DE does not have a license for selling some parts on EU market"
Mine is shooting at 1.3/1.4j with green gas! Im very new to gbbr! Is it because the barrel? Seen a couple of comments like this now! Please help on how i can bring it to normal uk limits? Magbe 144a gas?
Great video just came across your channel loving the videos I'm currently using AEG's can I ask would this platform be a good starting rifle to get into gddr as looking for advice
Amebia antibody combat moves some things work for other things but i got moves for the all of the above sickness list from bersekrer buffs from doing it all in a roe in a highly educated heal my toe heal my shoulder order - willy 0
it will slow down if you stick 250mm on pistol... (Ollie talks airsoft) already tested different length of barrels on ,but that another video of really good test flamingo vs maple lift well the Flamingo doesn't hold any pressure at all and it's not that good on range as well chanel: Fiep airsoft (Sniper mechanic flamingo vs maple lift autobot review plus shooting test) really great test. And thank you for the job what you do it you are the one of the people who bring in our hobby to new level thanks
I would like to see them make a compact model. I would love for them to do the Honey Badger. C&C Tac do a honey badger kit but its expensive and hard to find.
Would you consider comparing this to the CYMA noveske model?
It's the same thing only difference is the cyma is a High quality aluminum alloy external construction instead of polymer @@EthanL2023
I am wrong I thought this had a polymer stock> im not sure what the difference would be!!
I’d love to see DE make an M16A2, M733 or SR16
L119A2 in mws variant would be cool
My favourite Airsoft related channel 😎. Go ahead James 👊 I’m learning a lot watching your videos. Thank you ! Just want to leave my experience on my perfect combo with hop up on my MWS platform. On 2 of my 4 I’m using laylax arm with modify hop rubber (the tan for vsr) and laylax hop arm with nineball purple hop rubber. Lifting 0.30/0.32 without any issues. The other 2 are completely stock at the moment. But I like your combo as well. I’m gonna try those flamingo hop rubber if I can grab one
Nothing beats the classic 14-inch M4 from Colt with a RIS front.
Would like DE to make a sbr from strike industries, telescopic stock and their flash hider opressor combo.
Sai gry with gold bolt are also nice.
Also to be cross compatible (same spec) with their lowers, and sell complete uppers with different setups, rails etc.
I know I’m late here but I’d love to see uk KS-1 or the sig spear LT as a complete MWS system clone.
I’d love to see them offered in different lengths too
KS-1
Kept checking every hour for this video 🤣 watched it as soon as it came on. Bits ordered for mine now. De actually need to learn to answer emails. I’ve sent them a couple now but so far been ignored. I have a bit of wobble in my magwell , more than yours .
Thanks for following up on the magwell check! Your's look way more like a regular TM MWS magwell. Seems the TWG version was an early batch or something, as I'm not alone with the issue. Anyways! For anyone with a EU / TWG Version. Check your magwell play, shim if needed, and save a nozzle :)
I can also add that the TWG version comes with a innerbarrel that goes all the way through the outer barrel and shoots hot.
Finally. Double Eagle should make a MXC Spear LT thank you very much
This is Taiwangun's answer why EU version looks different than the one sold in UK:
"Thank you for the message. DE does not have a license for selling some parts on EU market"
@@janeksheppix that's stupid though. Other EU websites sell the UK version as well.
A shooting test would be cool - Then we can also see some real range and accuracy
Silver outer barrel looks terrible. I’d be tempted to spray it Matt black.
Real steel version is the same greyish silver. Got one myself, The finish looks better in person imo
The new version has an updated noveske black bolt
@@theresachungusamongstus9098 bro is not talking about the bolt.
@@rens7846ahmy bad. Got mine last week and I agree, the outer barrel looks way better in person
Think it's meant to represent a stainless barrel.
Swapped my barrel for 250mm laylax, now shooting at 1.5j with .32s, fine by me as Dmr route for me
I think it'd be cool if DE made something different. Maybe something far from the mk18s, the geiselles and all that.
Barrel shorter than 10inches. Daniel defense, noveske, there's plenty of choices.
Hell, actually some Strike Industries stuff would be awesome
I really hope they can make those uppers and lowers cross compatible with marui, tho
Stroke industries would be cringe
@@opairsoft8100 why?
Personnaly have the MWS N4, and both lower and upper are interchangeable with my Gun modify BC* receiver
I'd like to see some Aero Precision style receivers and handguards. For me they're one of the best bang for your buck companies manufacturing all around AR and general rifle components. I've built multiple real ARs from them and I think they'd sell big time based off the numbers they've had over the years.
Good evening, Al's First of all, I would like to congratulate and thank you for your great reports. I need help with the EMG/DOUBLE EAGLE NOVESKE. The GUN is new. I just swapped the bucking. Since this procedure, the original mag. and also two Lancer L5 AWM 30 BBs gas magazine for M4 MWS GBB - EMG/Cyma are empty after 5 to 6 BBs. Best wishes from Vienna
Wonder if you can help I have this rifle and I do have the stock hop unit I’ve tried upgrading the rubber to a maple 🍁 but for some reason when I slide the hop unit back in the hop unit goes tight and the arm don’t move have you experienced this any help would be appreciated thank you 🙏
SUPER IMPORTANT. I JUST SMASHED MY NPAS!!! MAKE SURE IF YOU PUT THAT O RING ON THE OUTSIDE OF THE HOPUP UNIT THAT THE UNIT SITS PROPERLY IN OUTER BARREL.
It doesnt seem to do so with plastic stock chamber. I just upgraded to a CNC chamber. And as it wasn't seated due to that o ring it smashed
Question for any experienced techs; What exactly contributes to the "MWS magic" that so many people talk about, where MWS guns are wildly accurate and consistent out of the box? Stripping away all the extra stuff, if you wanted to get similar performance out of something like the DE rifle, would it be as simple as swapping the barrel and hopup components to TM stuff? Or is there a whole slew of parts that contribute to their performance?
It’s due to the quality control
I really like the mxc kit airsoft artisan is working on, would not mind one from double eagle. Only reason that I will not buy the N4 is the noveske branding, and to cheap to buy new lower, upper and handguard.
If I secured a GE upper for a SPR type build, what barrel nut and putter barrel spec is this? MWS Compatible?
My mag well is that tight I have to open the upper to install the airtac adapter.
Installing a 350mm inner, it runs flawlessly at 60psi, but they want higher pressure to sound less springy. I’m going to cut it to the end of the outer, and then it should run happily at 90psi and run better. The standard bucking and nub are trash, I put a mr hop and omega on and it’s perfect.
Hey man, I got mine and the MWS magazines are very loose, also the double eagle magazine is loose as well. But I fixed the problem with some Velcro type in the front of the mag well. Before I did this, I have already broken two nozzles the original one and one from guns modify because the magazine would drop and the BB follower will catch on the top of the bb and will not push the bb into the hop up chamber, and it will cause to the nozzle to strike on the top of the hop up chamber.
DE should do an AK, obviously another M$ would be easy, I do like the fully licensed versions, M4 Aero Precision, Blackout Defense Quantum DTL
I imagine it will come in time.
@@Jaeger-Precision I hope so MWS AK upgraded out of the box for less.
Id love to see a good and reliable sig sauer mcx and mcx variants done by DE cause the other mcx gbbrs are just bad
So im new to GBB's
What the real difference between this and TM's ? Are DE's just based on the MWS or does it use the real MWS parts?
I got mine yesterday and the mag is perfect. Love the gun.i am goin to do some upgrades tho but for an out the box gun it is great.
James, of they will make a cheap MWS-Zetsystem based Rattler, they got me in.
Rattler!!!!
Since they have the noveske license,might as well go for chainsaw, ghetto blaster etc
Got mine today, shooting .28 bb and it doesn’t shoot far at all it’s ridiculous. I’m not sure if I’m missing something here? I adjust the hop up entirely and it works for a shot it looks like but then drops very low
I think it would be very cool to see a challenge kit or something for a lower price where you get the rifle minus the handguard, grip, stock etc so it's a base gun. I'm not a fan of the noveske styling so a regular m4 carbine would be great so we can have a great MWS clone build starter in the USA
There are 2 I’d like DE to make at an affordable price, like a 9mm MWS that takes glock mags- maybe like a PCC, and a clone of the TM AKM/AKX
I think when the hole in the upper for the pin is drilled it is paired with that upper and lower to allow for tolerance variances
I had to have a new lower on my MTW 9 got it back the rear pin was too tight had to send it back to get it reamed to fit
I used it during the ‘heatwave’ in September when it jumped up to like 25 degrees, on green gas with 0.25s it was about 260 FPS,
what is the length of the inner barrel that you put in it in this video?
Got the gen3, with black bolt and 270mm inner barrel.
Had already bought a 250mm maple leaf crazy jet 6.04, flamingo 60, JP titan nub for mws..
Haven’t gotten the nub yet.. but so far it doesn’t grip the bb, and arm is not straight, abit down on the outside of the hopup house.. I’m hoping the JP nub will solve this issue
I Would very much like to see in sr25 or m110 with thje Z system
Just before 13:52 you praise the laylax 250mm barrel for use with your AKM, could I ask what kind of performance benefit you got with that over stock? I've got a BBF hop arm, omega nub and a MR Hop bucking in mine (Which I'll be changing to a flamingo). I am slightly worried for joule creep, wanting to get all the accuracy and range I can get out of it since it's so fun to use
Mines decent but only chucking out about 290/300 on .20 anything that could be the cause ?
So question, I just picked one of these up and realized that the hop up is crap. So if I upgrade it, it can use ANY mws HopUp, Barrel, and Bucking? Just confirming, I bought this for that reason but before I spend my money I just want confirmation.
Hey Jaeger, there is 2 models from the Noveske, 1 comes without the bullet window DE mag, and one with.
The one you have is aimed for non EU market actually, its mainly sold in Japan,China,Hongkong as you look up on Thaiwangun the Noveske model is different, just like in any EU website its the same.
If you look outside of EU they're all with a nicer stock, and mag as well.
So it might be that it's a different batch and tighter magwell.
Because my friend broke 2 Nozzles by using T8 mws mag in the EU model with extra wobble.
(the ''EU'' DE mags are quite big from the upper side of the mag, and they do not fit into the TM MWS either, but the ''OUTSIDE EU'' mag with windows in does fit into the TM MWS.
This rifle was bought from a UK distributor. I agree without seeing the older one would be hard to say
Mine is also from a uk supplier and is the same as Jaeger
Mine was also from uk shop and has the 150mm barrel
and i assume it shoots 0.9--1J out of the box?@@TheRHYSD
@@ZartaxAirsoftyes
If they want to sell alot it's not easy, but i would say MCX or Rattler , Geisele mk4 ( hrt ) with the black and green... mk16 could be a option but nearlly all of us already have a mk16...😅
the mlok (R III) daniel defense Mk18 would be nice . KS1 and KS3 of course too
My MT MTR upper fits on my DE Noveske lower and shoots great no issues, just checked!
Does the Noveske upper fit on your MTR lower ? Thanks
@@jk-airsoft YES
@@hughobrien1234 thanks !
Hi There,
Hope you're well,
I bought one of these from Taiwan gun and it seems to have came with a 270mm inner barrel however its firing around the 1.5j mark with UK retailers selling them with 150mm inner barrel.
This is a problem for me as all Airsoft RIF'S in Northern Ireland have to fire below the 1j mark.
Would you have any idea what inner barrel length I should get to fire around the 1.j mark?
Any help would be greatly appreciated.
Thank you.
You will need to modify the nozzle valve as barrel length would be far too short
@@Jaeger-Precision no worries, I got your very low nozzle and titan nub hopefully that sorts it out.
Knowing my luck if I got the low variant with the barrel length I'd probably be chronoing at 1.1 😂😂
Thanks for the help.
Late to the party but would also like KS1, with or without trades
is it possible to swap the whole internals from the mws to the n4 ?
Can you use guns modify mags on it for the mws
Yep. Ks1 would be excellent please….
Also if they clone the tm ak47 ❤️
the KAC SR16E3 as a mws
I went from 150mm at 1j to 200mm at 1.45j. All the sites I know chrono with j not fps so I think I’m stuck with the tiny barrel.
Hello mate I just brought one of these guns from your old friends and would like to know is it possible to change the mag release for an ambi one? Cheers
I posted online about the barrel length, mine was 150mm and shooting 1j but others was saying that theirs is much longer and shooting hot. Perhaps it’s the difference between Japanese and European versions?
Hola! El bolt de MWS Marui es compatible? O solo han copiado el sistema de Marui? Gracias
Si son compatibles igual el de Guns Modify
Id love to see them do the tr1 AR-15 from jw2 as a gbbr.
I’d love too see a geissele fbi hrt 11.5 gbbr would be super cool too run one of those
plese de make a carry handle ar like the colt m733 on the mws system. there are currrently very limitted options that are very expensive for the mws platform to get something with a carry handle. also retro ar's are very popular right now but the price of a retro mws is the same price as buying a brand new vfc with a full set of mags!
You have the second/different version as mine is a few months old, and I got it from Taiwangun, longer inner barrel shooting 370 FPS on 0.20 BBs, mags are a tight fit no wobble, different mags.
Do you have wobble with mws mags or haven't you tested it? Was looking to buy it on taiwangun too.
Don't have any TM MWS, only DE & Gun Modify both fit, very little if any wobble.
This is Taiwangun's answer why EU version looks different than the one sold in UK:
"Thank you for the message. DE does not have a license for selling some parts on EU market"
@@hughobrien1234 ah okay thats nice. I bought guns modify mags for my DE so will see.
Waiting on mine from taiwangun.
So i guess ill need a npas to field it...?
Noveske Chainsaw. That would probably sell.
Mine is shooting at 1.3/1.4j with green gas! Im very new to gbbr! Is it because the barrel? Seen a couple of comments like this now! Please help on how i can bring it to normal uk limits? Magbe 144a gas?
I should say this is with 32s
Great video just came across your channel loving the videos I'm currently using AEG's can I ask would this platform be a good starting rifle to get into gddr as looking for advice
Anything Marui based. KWA MP9s are also a good place to start. There are loads of good starter gbbs but there are even more paper weights.
how come you doubleeagle mws has that magazines but when i look thats the emg version and the mws version has the bulges at the magwell
Not shooting 2 hot after this upgrade?
If you have DE's ear can you heavily suggest to them to do an M110 or even better a tar21
may I know where did you get the screw driver inside the box please @12:07
Not m4 but would love a decent m110 gbbr or sr25
Geiselle 7 or 9.5 inch would be nice. Or just something a bit shorter. Atleast in my opinion. Or maybe an ACR replica.
Also that black charging handle is so much more asthetically pleasing than the original one.
I m going to go to shoot it for the first time this weekend in the woods what are the most important part to oil’s?
I would love to see Bren 2 from DE.
What’s the gun like out of the box? Are upgrades a must before first game?
Mk18 ❤
Is the hop unit stock or a marui one as mine don’t have a little slots for the Titan nub to fit
Stock
M16A2 please
hi sir, what nub its that?
How long can be the inner barrel?
Wich inner barrel and bukings do u think is the best for the mws?
Prommy 6.03 barrel. Flamingo 60 degree hop rubber with a titan nub. Have it in every mws I own
@@Jaeger-Precision wich weight of bbs do u use? It'll works with 0,28?
@@greencobraairsoft anything less than a 0.3g in an MWS is pointless
maybe a L119A2 mws? maybe
416 or mcx
SIG MCX!!!!!
gief MCX Spear LT 11" SBR
How else does a magazine drop out when you press the magazine release catch... Jesus people... there's play in the real steel rifle as well.
416 I would buy 3
🤙
Mcx rattler
Natural antibody combat moves for all of the above and im 100% healthy as shit after that - willy 0
Sr30
Amebia antibody combat moves some things work for other things but i got moves for the all of the above sickness list from bersekrer buffs from doing it all in a roe in a highly educated heal my toe heal my shoulder order - willy 0
So pregnancy saves the country is the point as much as possible but a marriage one sends psychological message i need a mama uganda - willy 0
MCX
AK... AK... AK.... DE... make an AK
Cmmg mk47 gbbr 👀
That gun is perfect out of the box you will ruin it 😢
SR25...M110.. HEHEHEHE
Mcx spear l
416 forever...
O yes she's more powerful and jul cryp, you'll see when you shouted her outside 😂is just fisik
Small FPS increase because of Flamingo rubber
Its more likely due to the longer barrel as well.
it will slow down if you stick 250mm on pistol... (Ollie talks airsoft) already tested different length of barrels on ,but that another video of really good test flamingo vs maple lift well the Flamingo doesn't hold any pressure at all and it's not that good on range as well chanel: Fiep airsoft (Sniper mechanic flamingo vs maple lift autobot review plus shooting test) really great test.
And thank you for the job what you do it you are the one of the people who bring in our hobby to new level thanks
Ks1 ks1 ks1 ks1 ks1 ks1 yyyeeeessssssss