DIY HOW TO REPLACE TRAILER BEARINGS | 3500LB AXLE

Bearing Packer amzn.to/3HtI8ZF
3500 Trailer Bearing Kit amzn.to/494QIcX
Bearing Seal Driver Kit amzn.to/42icfg7
If Replacing the axle bearings you'll need the proper kit and bearing packer to do the job properly.
DISCLAIMER: Due to factors out of the control of BackCountry Wrenching and Bsk Garage, we cannot guarantee against improper use or unauthorized modifications of this information. BackCountry Wrenching and Bsk garage assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video and all other videos produced by BackCounty Wrenching and Bsk Garage. Use this information at your own risk. BackCountry Wrenching and Bsk Garage recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BackCountry Wrenching and Bsk Garage Be safe! This video and description contain affiliate links, which means that if you click on one of the product links, we receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!

[@emilmaki3001]

Thanks for the how to video. You have given me the confidence to try and tackle my own trailer bearings.

[@danhambrick6331]

Nice job Jerry. A little bit of preventative maintenance goes a long way...😁👍👍

[@im2crafty]

Back in the ,60s- it took me a wknd to do this on my chevelle...never again !

[@MarcusBerking]

Take her for a rip around the block and get it warmed up then re-check the bearing preload cos they loosen up once the new bearings have pushed some of the grease out

[@armslength2618]

Next step - install a pair of outboard trailer shock absorbers.