I’m stuffing that same engine in a Coleman 200u mini bike on big knobby tires to take out scouting and horn huntin. Ought to climb hills just fine ! Sweet buggy Red 👍
Exactly what I was looking for thanks for the video! Just picked up a white fox two for my kids and wanted to weld in a rear swing arm and a front suspension kit. Picked up a 224 max a few weeks ago and didn’t have a clue what to put it in until I found the kart. This video will help out a lot 👍
Looks good. I'm getting all my things around for my American Spider works Maruader and got the same motor. We ran the 196 last year in it, but with it being a two seater needed more power to keep up with pack and have more fun. I can't wait to get started.
Any help would be greatly appreciated. I put one of these in my golf cart with the 34mm mikuni carb. Same setup and I cannot get it to run reliably. Plugs are completely carbon’d up and the cart misfires when at top speed. I’d love to know the jetting on this. The stock jets are for sure an issue for this engine.
Hey there. I happen to have the same go cart and purchased the same motor. Wondering if you’d be interested in building a swing arm for me. I don’t have a welder. If you’re interested let me know the price thank you
What size is the filter coming off the hemi head? I got your carb set up of go power I just don’t know what size the other air filter is that you pull off to access the choke easy thanks in advance your videos are extremely helpful dude you have no idea
They are useless without the 780 torque, at least running it like we do and with the mikuni. Ya. No governor. Waiting on NR racing to come up with a flywheel.
I seen on red Beard's garage where the crankshafts are the same as far as the rod journal and output shaft is concerned so my question is could you not use a regular 69 mm crankshaft in that motor to fix the flywheel issue? I've got an extra one where do you live
@@BubbaB43 possibly? I have not done any measuring as far as they goes. I just know the taper is huge compared to the 420. I would much rather leave the stock crank for now and wait on a new fly wheel. I’m in Bristol va.
I’m stuffing that same engine in a Coleman 200u mini bike on big knobby tires to take out scouting and horn huntin. Ought to climb hills just fine !
Sweet buggy Red 👍
That leash kill switch is genius!
I live in south west west virginia and have 2 of these karts. Love riding thru the hills. New subscriber today.
Where about s do you live?
@@byker283 Wayne county. On the ky wv border
Exactly what I was looking for thanks for the video! Just picked up a white fox two for my kids and wanted to weld in a rear swing arm
and a front suspension kit. Picked up a 224 max a few weeks ago and didn’t have a clue what to put it in until I found the kart. This video will help out a lot 👍
Looks good. I'm getting all my things around for my American Spider works Maruader and got the same motor. We ran the 196 last year in it, but with it being a two seater needed more power to keep up with pack and have more fun. I can't wait to get started.
Great build 👍
Thank you!
Im surprise you don't have over 1000 subs your channel realy underated
I got the blue and gray one just like that one mine is a two siter
Can’t wait to see these go karts rip
❤️ ❤️❤️ ❤️
🔥🔥🔥
I have this engine. This engine does have a starter that came on it..
Mine does. Perhaps you didn't buy the engine with the electric starter option.
I was waiting to hear that thing!!! Lol nice build dude good luck with it👍🏾
Any help would be greatly appreciated. I put one of these in my golf cart with the 34mm mikuni carb. Same setup and I cannot get it to run reliably. Plugs are completely carbon’d up and the cart misfires when at top speed. I’d love to know the jetting on this. The stock jets are for sure an issue for this engine.
Hey there. I happen to have the same go cart and purchased the same motor. Wondering if you’d be interested in building a swing arm for me. I don’t have a welder. If you’re interested let me know the price thank you
Did you have to delete governor for that carb ?
No you do not.
What tires are those?
How much do it cost to build one of them
Did you delete the low oil sensor?
Is this the GPS Mikuni carb?
What size is the filter coming off the hemi head? I got your carb set up of go power I just don’t know what size the other air filter is that you pull off to access the choke easy thanks in advance your videos are extremely helpful dude you have no idea
Not sure. Been awhile. Karts are done sold. I know it came from advance or autozone.
Why the silencer?
Stupid annoying loud without it. Needs a little back pressure also👍
@@byker283 Still has SOME restriction.
@@byker283 The point is no backpressure.
10.4. Thanks for inquiry!!
I think you should build a fuel efficient model. What type of gas milage are you getting with that baby.
Hello Jared. Thanks for the inquiry! Yours is almost finished. It should get about 100 smiles per gallon.
Will this engine work with a 40 series torque converter,
Yes. But with the mikuni carb it will not stand it
@byker283 Thank you boss! I plan on keeping it stock seeing how it should have plenty of power
@@sickduck66 no prob. If you out a mikuni round or flat on it you will never go back 😏 it’s insane difference. Stock jets seem to work the best
@@byker283 can you point me in the direction of the carb I should run with brotha
@@sickduck66 mikuni round slide kit from go power sports. You will need to add the mikuni. Throttle cable to your order.
Just finished installing a 459cc on my yerf dog. Any chance I can pay you to make me a header?
I have one built already, with silencer and wrapped. Text me and I’ll shoot ya some pictures. 423 534 8699
Can you get back with me and let me know I'm with you I'll charge the bill though cars
dude allllll that and you didnt even rip it around wtf lol
What intake did you use for that carb?
It comes with it. In the mukuni kit
@@byker283 I saw that on gopower. I didn't realize the 420 intake was the same.
I love the toque converter your using.Did you take your governor off?
They are useless without the 780 torque, at least running it like we do and with the mikuni.
Ya. No governor. Waiting on NR racing to come up with a flywheel.
I seen on red Beard's garage where the crankshafts are the same as far as the rod journal and output shaft is concerned so my question is could you not use a regular 69 mm crankshaft in that motor to fix the flywheel issue? I've got an extra one where do you live
@@BubbaB43 possibly? I have not done any measuring as far as they goes. I just know the taper is huge compared to the 420. I would much rather leave the stock crank for now and wait on a new fly wheel.
I’m in Bristol va.
what size is the mikuni carburetor?
34mm
You get a top speed test yet?
Right around 52. But that depends a lot on your personal set up.