TA-0405: BG5CQV SWR Power Meter CQV-SWR-508 1.8-54 MHz - Hands On
Vložit
- čas přidán 23. 08. 2024
- Latest Digital SWR PWR With Bars ! BG7CQV- Practice Test and Teardown
The item:
CQV508 go.tonyalbus.c...
CQV508_2 go.tonyalbus.c...
Related Items:
SwrDigNeedleNeedle go.tonyalbus.c...
CQV120 go.tonyalbus.c...
ATU-100 go.tonyalbus.c...
Moonraker LWHF-80 go.tonyalbus.c...
Moonraker LWHF-40 go.tonyalbus.c...
Related Videos:
CQV-SWR-120 • TA-0307: Mini 100 Watt...
Daiwa CN-801 • TA-0364: Daiwa CN-801 ...
ATU-100 EXT • #296 ATU-100 EXT 1.8-5...
#BG5CQV #SWR
Meter injects super bad noise onto the signals. Faulty out of the box and I had to return mine.
Thank you for this important comment, you are the 2nd to notice this and mention it in the comments, this for sure needs more investigation on my side. i did not test that.
i am still using my Daiwa myself. i will test more and make a new video when needed and Pin your comment.
Yes mine i bad too. 1.766 MHz / 3.531 / 7.065
I have the same problem, produces massive RFI on the 40 meter band. I have not spent any time to see if I can fix it, sending back to China is too expensive.
@@robertherendeen7702 Yes best thing to do... i am completly cured now from digital SWR meters... i use my good old Daiwa.
Very nice looking piece of kit, Tony. I also like an "analog" display for tuning/alignment - call me old fashioned too. You need to get a large 75 ohm load for you bench - terminate a 50 line in 75 ohms and get exactly 1.5:1 SWR. I used this trick to calibrate beacon interrogator SWR monitor circuits.
Thanks David... That is a good one the 75Ohms... cool! will do.
Hi Tony, What a great meter. Bright detailed and very nice addition to the shack. It is certainly complements the modern radios you have with big displays. Thanks for sharing. 73s
Thanks Ian, yes good point to match the modern display, now i need to find a nice spot for it.
Hi Tony, I have the same BG5CQV SWR power meter and several CN-801 HF. VHF/UHF Daiwa analog meters. We sure have a lot of the same equipment... great minds think alike ; ). I also like the digital bar graph feature over just digital number readout. So far I am happy with my BG5CQV. I have not opened mine up. Thanks for the video.
Hi John, yes amazing how much equipment we have in common indeed, nice to see so. For me Daiwa is still the best, also i have always seen then in my dads shack, so they must be good. i have bought a few second hand and all of them have been still spot on. they make some amazing quality to last for many years. but this modern stuff is great to try and they have build something good this time, if the sample could be higher it would be better even.
A nice meter. I do like the high SWR alarm
Great for when you switch bands on the TRX and you forget to adjust the tuner...
I have this meter and it did restart every time i went over 70 watts on battery, not with the charger Connected. The text SWR and FWD change to Chinese text when i go over 125 watts. I changed the battery to a 5000 mAh and it looks like it is stable now and will not restart as long as the battery power is good, but i have to live with the Chinese text(i dont care to much ). The charger give some noise but not all the time, no noise on battery. Banggood wouldn't give me a refund or exchange it for a new one(i am done with Banggood). But i am happy with it now as long as it works? It is maybe the most beautiful SWR meter on the marked i think so it is sad it dosent work as it should. The bilt quality is good.
Thanks for sharing your experiance with Bang-U-good, yes i also do not take any equipment from Banggood anymore, not even for free to show on the channel, their aftercare is terrible they are only good for selling unbreakable stuff like bricks as they know very well how to do that , i order electronics form them and receive a brick :)
Sorry to hear you have had problems, and we need to share this to safe others..
hope yours keeps working.
@@TonyAlbus yes we do, love your channel. thanx for your work👌73 from North Norway
I like needles too, and MFJ has already sold a lot of their stock. For me it makes sense to have the tuner and two needles in the same device. I like turning knobs. Some things are better if analog. I still like my VOMs and VTVMs too.
Yes i read somewhere that MFJ stopped the company if i remember correct. Comet has a nice CAT-300 i use and its great. although i must admit that the older Kenwood At-200 /230 and some of my Daiwa tuners work amazingly well still. Sorry to say i was not a big fan of MFJ, their cheaper tuners were not that good and fragile, but nicely compact for mobile. Needles rock!
I'd guess that the update rate of the bar graphs is dictated by the length of time it takes to re-render all the digital values on the display. It would be a nice addition to the software, to give it a "fast" mode that has much more responsive bars at the expense of smaller digits.
Hi Colin, that is a great idea, a sort of Tune mode where you only have 2 bars with crazy fast update... i hope they will do this at some point.
very good greetings from Australia
Thank you very much! Greeting to you too!
ciekawy miernik. Pozdrawiam z Polski
dzień dobry panie dziękuję
I bought one of these meters. The display was excellent and I really liked the unit ... but the meter generated significant RF interference on 80 and 40 metres. It had serious spurs on 80 metres and on 40 metres brought the noise up from below S1 to above S3.
I sent it back and got a refund.
Oh thats not good, i did not test that yet, thanks for sharing!
@@TonyAlbus I would be interested to hear the results :)
After your comment others came.. i just did testing today and Yes mine is bad too. 1.766 MHz / 3.531 / 7.065 spurs
same will send it back, just in time for refund, again a don't buy video than... and it looked so well build...
@@TonyAlbus Thank you for confirming that the problem wasn't limited to just the unit I bought.
I agree ... it is a shame, because the meter looks well made and the display is excellent.
I think the logic and active electronics needs to be separated from the sensing section, and the sensing section properly shielded with just the DC voltages representing forward and reverse power coming out ... preferably via feedthrough capacitors.
@@VK2AAK i'll stick now to my nice Daiwa cross-needle ..i even have a few 40 or more years old... still spot on..
Got one too, it's a nice ham-toy.
To sad it is generating interferences.
BTW: Which Marconi is it? ;)
Hi! .. 2955 :)) love it
Cool, more shack clutter?
Yeah!!! can never have too much... just need more space :)
@@TonyAlbus I keep collecting even that I have lost count years ago!
@@LawpickingLocksmith :)) yes i know the feeling.... we can't help it.
would be very good if there is a meter that will cover the VHF bands / UHF bands 144 Mhz / 432 Mhz
Hi John, Daiwa has the V in there series that does that. Comet has tuners with crossneedle for both, i have the CAT-300 for HF and they have also a CAT-283 for VHF/UHF. but for VHF/UHF there is not much to tune once you cutted it to the right size/length.
@@TonyAlbus thank you
I ordered one. Do you know of any higher power meters like 2kW?
Hi, in this model i have not seen, but Daiwa has
How long will the battery run prior to recharging? Ronald de PH7R?
Good question, i can't tell you, but after using it for 2 hours (allways on mode) the battery was still 4.0V. it needs to be charged at 3.4V the manual says to charge it at least ever 6 mouths. it mostly needs to power the display, so turning the brightness down will give you even more time, also it has auto shutdown. all these factors matter a lot on total use time. 73 Tony
I'd stay away from the cheap Chinese meters. The cheap displays have cheap inverters to run em and introduce a lot of noise into your signal. You CAN'T filter that out no matter what you do. Signal loss is a whole other story. What your seeing at the radio doesn't reflect what's being put out at your antenna. There's a new flood of these type of cheap meters coming in from China on the cheap and reports of quality control are pretty bad. It's a 50-50 wether or not you even get one that works. Considering terrible shipping times it's not worth it.
Yes clearly visual here : czcams.com/video/W03w-dh7qgY/video.html
But only 100w? Useless really, it would be far more usable if it had a 2kw scale
It goes upto 125 Watts, for most HF kits thats enough, for much higher power you prob want a 'real' brand. or the Amp have its own meter and matching unit
Most Amateurs around the world dont run huge amplifiers due to licence restrictions in their country and the vast majority of popular commercial rigs are 100w
200w the power meter auto adjusts
@@jackhammell1926 Thanks, nice to know!
Hi. I just found your channel. I appreciate your review. Well done. New sub here. 73 de WA3RSL
Welcome aboard! Thank you sir and enjoy 73