Three Easy Mods For the 2022 klr 650. 22 Klr Build Series
Vložit
- čas přidán 6. 07. 2024
- Part three of the 2022 KLR 650 build
get your 2022 klr 650 @3D Cycle Parts
www.3dcycleparts.com/
get you some Full Throttle Junkie gear
full-throttle-junkie.creator-... - Auta a dopravní prostředky
Great explanation. Thanks for sharing with us.
Glad you liked it
Full throttle on a KLR…Impressive
Nice I have a new 2022 KLR and these are sweet upgrades 🤙🏼
I removed my snorkel and was very happy with the result. I added the Uni after that and lost top end, so I put the stock back in for now. As soon as I can add an exhaust and tune I'm going right back to the Uni. And man, do I wish I would have seen your video before I pulled the snorkel! Your method looks so much easier. Great job!
Yeah I can't wait to see what a tune and exhaust would do to the bike
Great series.. I took your advice on the heated grips. They are awesome!!!
It has the same effect as holding a warm cup of coffee in the morning
Great Stuff!! I did the Lexx slip on and Eagle Mike KLX Jet Kit along with air filter upgrade. Big improvements! I ordered the tusk shifter also!
Yeah I was surprised when I did the jet kit on my second gen
I want one so bad!!! Klr650 will happen soon!
Thanks for video
It really is a great All around fun bike
Good job! I did the pegs and peg bolts.I also did the shift lever and uni filter. Tusk is good stuff and affordable. I also put the leo vince slip on exhaust on recently. Thanks for the time you took for the video. I look forward to future vids SUBSCRIBED!!!
Right on. how do you like the exhaust im trying to figure out witch one to get
@@FullThrottleJunkie Love it! It comes with 4 different baffles including spark arrestor. Fits perfectly and sounds great.
Those Pegs look nice! I'm a size 12 and tolerating the OEM pengs for now. But these three mods are a must pronto for sure! Thanks for the video! 👍
Yeah it makes it to where I don't feel like I'm going to fall off the bike
Great post, very detailed and useful.
Thank you 😊
Nice opening! (been there🙃) The first two (and cheapest) mods I did on my KLR were the Tusk foot pegs and gear shift lever too from RMC! (tough to beat)…Nice work!…Love your channel! 👌😉👍
Thanks for watching Im having fun with this one
Nice job, buddy! I absolutely love this bike....did a top case, Tusk tang bag, and some Acerbis hand guards, and I am having the dealer do the 600-mile service tomorrow. Good mods, bud!
Thanks for watching
Great tips and video. Thx
Thank you. I appreciate the feedback it does help
Great vid man so much information in this one
Thanks 👍
Thanks for a nice video. Nice work.
Thank you for watching
Sweet vid, v.easy to follow brother. Subscribed!
Thank you
Yeah. That airbox snorkel. I was trying to get it out from the other side (based on another video) and it was a pain in the ass. Somebody in the comments suggested coming Into the air box and that was the ticket👌
Yeah it's way easier to get out from the bottom you don't have to deal with the frame
These mods are within my skillset. Now I just need a motorcycle license, bike, and parts.
It's all goals that you just chip away at little at a time nothing is too hard to do
You can get your bike before your license.
Nice video, remember everyone give a subscribe to help his channel. Tip : the new shifter will rub on the engine cover ( my IMs shifter did, sure the tusk will likely do the same?) So file slightly the back of the tip of the shifter that rubs the engine cover , this will at least prevent the bigger scrapes and if contact occurs will be a smooth rub rather the a sharp bite. KLR is the tinkers favorite project bike
Thanks. I thought the shifter was going to sit Too Close like it did on my 2016 but this one has a good size Gap
Hell yeah
Right on
Sweet job man try just extending the breather tube that will do it.thumbs up man and stay safe
Don't really have room to extend the breather tube it goes from the crank case to the air box
cool
Thanks
The first mod I did too mine was removing those goofy little foot peg... pegs things hanging down.after about the tenth time my shoe laces got caught on them they had to go.still haven't figured out what they were for.is it possible to do these mods WITHOUT the techno/metal music playing? don't want to mess anything up.
3 of the 4 parts I wanted were out of stock at 3dcycle, so much for free shipping.
Those tusk pegs look nice and im sure they grip amazing but they sure look like they would chew through a pair of boot soles in no time i put the cheap ebay pegs on mine they arent quite as agressive as to tear up my boots but still give me ample grip when wet or muddy
It shouldn't tear up boots that bad
Yeah, I have them on my KLR as well, and they are “rounded” on top as opposed to a sharp “knife” edge👌 (best deal for the $ I could find)
16 tooth countershaft sprocket add legs to all gears and prolongs sound waves and roosters.
I was wanting to try the 16 tooth sprocket but I was worried that I might lose some low end grunt
Do you disable abs when you wheelie this big bike?
Also: can you do a short video tutorial on the one way check valve for oil in airbox?? :o
For the wheelie lovers
Man, I did the uni air filter on my new KLR, make the throttle alot snappier, I will not remove the snorkel thou !
It's not really necessary but I do plan on having the bike tuned so every bit of air i can squeeze out of it the better
Doubt you will get any more air by removing the boot that would otherwise prevent water from entering the intake. Besides the fuel injection is set up near perfect for the rest of the design. So many after market air intakes have been proven to actually reduce power. At least without other modifications and tuning. Free or cheap usually leads to a crappy running machine. It may sound a little different by hearing more air noise at the intake but any perceived power gain will be a placebo effect. In other words just your imagination.
i have a great imagination
Exactly, youtube is full of bullshit...probably Kawasaki needs to employ this smart ass...
👍
😎
Hey guys. The hot tip of the day. Trust me. Put a stock 2018 pipe on the 22 year bike. That euro trash oem pipe has to go. I welded an appropriate nut ad drilled 02 sensor bung on it. Now cold starts yield a puff of richness and with a Lexx pipe makes power band music. The FI adjusts perfectly and you F... fmf power bomb pipe out-of 200 bucks. Ill never use fmf pipes because they dissed me on the phone for free thought.
The klr sounds so good on single lane backwoods macadamia. Do it. Ebay has 2 pipes left. Mine was 50 bucks.
Big diameter pipe
I like the sound of the yoshimura pipe
Love your videos, but those dreads throw me off. Nothing personal brother. 👍👍
well its a good thing my videos are not about dreadlocks lol
Hello mate
How much mo power do you think if you changed the whole exhaust system?
And do you or have you heard of any ecu upgrade ?
I haven't had bike for along time and I want the klr to be my only bike.
Thanks
I don't how much power it is going to make yet but I am working on getting an exhaust. I have the power Commander already just haven't installed it yet. Check out 3d cycle parts they have just about everything you will need for the KLR
Hey thanks so much man
At least 15....and one donkey too