Flipper Zero: How To Run Marauder on the WiFi Dev Board
Vložit
- čas přidán 17. 07. 2024
- In this video, I show you how to install the Marauder firmware on the Flipper Zero WiFi Dev Board so you can use it in your next WiFi analysis operations on the go. Currently the Flipper Zero does not natively support WiFi. While the WiFi Dev Board seeks to bridge that gap, the Marauder firmware ensure it's use has the necessary capabilities to augment their efficacy in a pentesting environment.
------- Flipper Links -------
WiFi Dev Board Alternatives Video: • Flipper Zero: WiFi Dev...
Dev Board Enclosures: www.tindie.com/products/justc...
Flipper Zero: flipperzero.one/
WiFi Dev Board: shop.flipperzero.one/products...
Flipper Github: github.com/flipperdevices/fli...
------- Support -------
Patreon: / justcallmekoko
------- My Links -------
My Store: www.tindie.com/stores/justcal...
Instructions and Downloads: github.com/justcallmekoko/ESP...
Discord: / discord
------- Socials -------
Twitch: / willstunforfood
TikTok: / just.call.me.koko.rip
IG: / just.call.me.koko
------- Timestamps -------
00:00 - Project Introduction
01:57 - Tutorial
04:27 - Mobile Setup
04:57 - Conclusion - Věda a technologie
I'm pretty stoked to see that you have a flipper and are part of the community!
Thanks for the video as well as all the time and effort you've put into the project so far. :)
You're awesome!
My pleasure. I’m happy to be able to contribute
This is amazing, So lucky you are part of the community!
love the video! wish I had it when I was first setting things up just to see. for instance the way the dev board was labeled messed me up initially. figured it out though lol. keep up the great work brotha! looking forward to ordering one of your marauders.
that happened with me to and then it got to 100 percent and said it failed but it still worked
Just came from an IG reel about your 3-D printed pano nvgs. Subbed!!
I LOVE this but I think one thing that should be noted is if you're using PuTTY on a PC you need a baud rate of 115200 to get the Marauder firmware to come up correctly. (I actually found it in Flipper Zero's documentation) Other than that, this is AWESOME! Great work!!
this is the type of thing someone would say in a movie and then someone else would go like “in english now?”
@@azaanbot3333 seriously
Hey man, so I'm actually experiencing this issue right now I think. When I try to connect via COM, I keep just getting the flipper and none of the commands look like they'll initliaze the maurader software. Any ideas? I did try your baud trick.
@@azaanbot3333 do it work on atms
@@lemelmccutcheon4335 am i talking to a future criminal
This made me properly laugh whilst watching. Not only incredibly informative but also incredibly self-deprecating. Made my day mate.
If any thing, I think I talked myself up lol. Thanks for the support
Hey just found your Channel you're doing some really cool stuff and I would love to see more content from you keep it up bro!
Thanks I appreciate it
Awesome video bud, I just bought the flipper and I am looking forward to conducting some learning projects thanks for the information bud. I am knew to this so I hope it is not to daunting to learn. 😅
This is fantastic, i've aways wanted to learn how to do this (by always I mean, ever since I got the flipper zero). Just started getting into maker making, would be keen to hear your perspective on how to get started started, what concepts you need to learn, what tools you need toget started and progress and upskill. Cheers!
It really all depends what specific proficiency you want whether it's with networking, software/firmware development, etc. Generally I would say you should always get familiar with a couple different flavors of the Linux OS and its command line and learn some scripting preferably Python. But beyond that, just find CZcams videos of projects you think are cool and try to build it yourself. It will inevitably result in you learning the skills required to finish the project.
@@JustCallMeKoko interesting, thanks man! I shall follow those instructions!
Look for a Bsides conference in your area or attend Defcon in Las Vegas. They have a hardware hacking village also some places have local hackerspaces. Depending on where you are located at.
@@pyrophreak2600 thanks, this helps too.
My dad taught me how to do all this back in the early 90s, don't know how he knew but he told me one day there's going to be a device called flipper zero and that I should know what I'm doing, he was my father but I just called him koko.
duuuude the jokes in this video are killing me
Haha what jokes? This video was 100% serious
SPACEHUHN?!?!?
@@JustCallMeKoko dude this happens to me all of the time. I say something and i am dead serious… and the whole room starts laughing. I play it off like i was trying to be funny… but i wasn’t… i was dead serious
Bro, are you alive or killed
"Slash 3 tites, dont do all4" Hahaha.
So that way can watch them say "fuck it, ive still got 1"
Allwhile shredding the tire and flumpig around.
Flump.
Fpump.
Flump.
ive actually found your page your like a legend in the game
almost spat out my drink at the intro when you said "or social skills" 🤣🤣
Great vid! Did nobody else see you jump cut from beard to no beard nonchalantly? Smooth
I’ll have to get the dev board and add it to my kit. Thanks for sharing!
Yea man P1
Great video dawg 🤘. Imma pull out my flipper zero again
There is a new July 2022 firmware update for the Flipper. So you should pull it out and update that also.
Haha you are excellent at presenting and editing ...well done
Thanks I appreciate that
@@JustCallMeKoko you're awesome keep up the good work!
@@JustCallMeKoko it's the truth I can tell you put in the work
Thx for the video. Question, Is there a way to reset the ESP32 Wi-Fi Dev Board to factory settings, using a Mac? I’ve researched it and the info given, is not working? Or do you recommend trying to get a hold of a PC , to reset?
Awesome video as always 😇
Just 10s in the video and I am already hooked😂, awesome combination of neddy stuff and jokes👍
Scares people away irl but lures people in on the internet
this is a good complementary video to simplify the documentation as probably a few people may have stumbled after the wifi configuration part. the steps of using the usb serial interface to connect to a rebooted dev board wasn’t that clear, depending on which site or page the instructions you were following were on.
lastly, some non-ios “android” users may be using a locked down phone such as grapheneos on a pixel device, which essentially disables any terminal and usb to serial interface functionality. in that use case, another android phone or a portable computer might be needed… so, i’m currently eyeing a oneplus 7 pro since might as well install nethunter while i am at it. :)
I did end up going back and adding some more verbose instructions for the physical connection on the github page. This is very recent so hopefully folks will find it helpful
@@JustCallMeKoko thanks 🙏
If you're going to install Net hunter you may consider getting an external TP link wireless card. It can do similar things as the dev board but you get an ITG cable and velcro it on the phone
Having this issue I think, Pixel 6pro cannot see terminal commands while in the esp32 app but can use them for the flipper in general. Any help would be appreciated. Running xtreme if that matters.
@@iblackfeathers I would love if you educated me on this😭
Hahaha! AWESOME. Thanks for the vid. I just got my Flipper last week, and already played around with NFC and SubGHz, still looking into what I can do and learn with it. I've never done anything too technical, you have any tips on what a noob should look into?
Great video bro, love it.
Thank you very much for your work
Cool ! Thanks mate ! Good video !
Get some rest you need it more than I do 😂
So I can't upload the file to the devboard, all I get is "exit status 1" which should indicate that i have to wrong port selected in IDE
But I'm on the right port (the ESPS32S2 Board) and i still get it, what's the cause of this? Should i use a newer version of the esps32 by espressif?
Thanks in advance and besides that very helpful video :)
Awesome video!
I am super interested in using this setup but pushing it a bit further so you can run a few attack macros with the flipper dpad and screen.
Some dpad macros would be pretty sick
You can do some control in the android app. I think its listed under the experimental section of the app.
Hello Koko, thank you so much. I hope I will manage it.
One question so far during the process: I can find on ARDUINO IDE App two different esp32 boards today, but non of them includes the specific one 2.0.1-RC1, you refer to. Therefore, I do not have the needed port. What do you suggest? Sincerely, Balint
Inspiration. Would you sell your marauder design built? I have no idea how to even start. Unless you do private 1 to 1 lessons. Great content.
That's a record, no other channel has gotten me to sub in the first 30 seconds.
You see the pain in my eyes. That’s what does it
After installing the esp32 2.0.0 rc-1, step 5 and 6, do I need to install the 2 drivers listed in the instructions? Cause on the video it does not say that.
This video is absolutely GOD TIER 🙌
You're awesome. Love your stuff
Any chance you could integrate SSLstrip into marauder?
Awesome Video, i will give the mobile setup a try, looks interesting :) Keep up the good work 👌👍👍
Please do an let me know if you have any issues. Feel free to join the discord server if you need any help as well. I plan to make a video about this but there is also the Unleashed flipper zero firmware which has a companion app. This app will allow you to use Marauder without the need for a mobile phone or PC
I'm using the Unleashed Firmware, in the Unleashed app everything works well but when connected to the smartphone it doesn't take any commands (check discord, i posted in the marauder support channel)
:) friendly regards
I subscribed 15 seconds into this video lmao. And that was before I recognized you from your handle as firmware bae
Woaaaaaaaaaaa 😅 are you Koko ? 😵💫😵💫😵💫 latest stuff with the dev board is amazing
I installed the easy version but I think I figured out the issue I was having earlier, how would I get your method flashed on it? Is there anything I have to do or can I just go ahead and start the process on arduino.
Great video, I just subscribed
This is an amazing tutorial. One question, what are the other url's that you have there?
Quick question is there any reason we can't use 2.0.3 vs 2.0. 1RC1 for the Marauder OTA And there are two new ones out call FZ Marauder Flasher, FZEasyMarauderFlash would you know witch one has the most utility in them? Thank you for your video doing a very good job on them.
yea i want to know about the 2.0.3 vs 2.0.0 rc1
Is there any link to the specific PuTTY that you used in the video?
Is it normal that over the serial connection there is no echo and commands will be automatically submitted after a second of no input? I'm finding it very stressful to not be able to stop and think while typing because I can't even wait for a second to think before finishing my line or it'll be executed and in the best case it's incomplete and invalid, in the worst case it happened to be valid already and I did something I might not have wanted to.
These jokes are my kinda comedy, subbed and looking forward for more!
I'll get my ghost writer right on it
@@JustCallMeKoko LMAO what are you, RiceGum?
Koko! Please answer this question it's killing me! When using terminal on Android to control Marauder, how can I get it to save the pcap files on the SD in the flipper? Or at least get it to save pcap files somewhere?
do you have a link to that 3d printed case for the dev board? getting mine in the mail soon and am terrified of dropping it and making a 30 dollar mistake
I bought from you an amazing dev board case
I hope you like it
hey I setting up my Filipper zero and im follow the directions on your github, the CH340X driver is for Windows and im on Mac, is this essential? will it work without it?? or do I need a PC to do this?
veeery helpful!! thankss!! what's the cmd line for one of your macros? or how do you access marauder command list, my "help" action displays flipper's options (I used the Flasher Script)
If you are seeing the flipper commands, you are on the wrong USB channel
@@JustCallMeKoko thanks for such a fast reply! I tried changing the USB-UART Bridge setting from the GPIO option menu, but seems buggy since the changes I make are not persistent after closing this option, I'll keep trying some workarounds, thanks again!
Its nice to see that my fav youtuber also has a flipper since I have my own dstike deauther watch
Hell yea I think I have 3 deauther watches now lol
@@JustCallMeKoko you inspired me to learn more of the world of technology ☺️
Im glad I came across that video about your watch years ago 👍
Does this/ will this have ssh support? I feel it would be perfect for use with the zero if you could connect wirelessly and would allow IOS users to actually do stuff
I get you.. waiting on my board.. your vid help me out
This is awesome!! Thanks for making this
how can i detect card skimmers a the gas station with the flipper zero and esp32 wifi dev board? i heard you can do this and have been researching it all day.. i came up with stuff that leads me to believe that i need flipper , wifi devboard and a pc to accomplish this? is there a way to do it with just the flipper and wifi devboard?
I have roguemaster firmware on the ol flipper zero and wifi marauder on the devboard
I don’t know what you’re up to….but I like the way you do it.🤔
I am also trying to figure out what I'm doing
Small question, is this needed to be installed on the wifi dev board to be able to utilize the Marauder companion app from the unleashed firmware?
Yes. This is what that companion app was made for
what if i installed the wrong version of esp.32 and not the rc1 version, but then did after? do i have to undo the wrong file? how so? or is it fine with both?
Hi ! i have a probleme, when i plug my DEVBOARD from flipper, it show me on the Arduino, 2 ports. The COM5 and the COM6. Is my devboard not programme to work like yours ? Can i still install the Marauder32 ?
use a different USB-C cable... not all cables are the same and thats what i did to mine
what kind of cord is used to plug in your wifi dev board and how is it acquired? does it come with it when purchased? i haven’t bought the board and was wondering if it is with it or separate.
It's USB-C
What do I place in the command line to bring up the actual program?
mine its stuck on 11% when updating the bin file on that url, what do you suggest?
U won my subscription!
so do I need a pc with wifi for this? 3:58 or when I connect the ESP32 to the pc Its enabling me wifi?
Hello. I followed the video and Installed all the software. I can connect to the flipper zero using PuTTY, but i don't know how to start the Marauder software. Could you please help me.
Things must have changed. Cant find the upload page where it says 'blue pill' / 'red pill'. Do you happen to have an updated link? Thanks.
Cool concept...but what can I do with flipper+marauder+serial on Android that I can't just do with some other app directly on Android?
someone should make it so you can just bluetooth to the flipper and send commands wirelessly to the marauder esp board would that be possible? does the flipper just power the esp at this point? would the flipper be able to take bluetooth commands \data and pass them along through uart to run commands via a bluetooth uart bridge to the esp dev board in theory?
Flipper does have Bluetooth Capabilities. I don't know if the app has terminal support yet. May have to request that from app developer?
on the flipper dev boards some people are using the marauder mod but it appears with an extnernal antenna, does that rp-sma female line have to be soldered once purchased ?
The connector the line connects to on the ESP32 WROVER module has to be soldered and there is a jumper resistor that has to be rerouted to point to that connector. There are plenty of tutorials on line that show how to do this.
Why not have pre written code saved on to your or make a app for it?
1:57 -> missing beard, haircut (?), shirt change, and light change. :) gotta love those deep multi-day cuts.
is it possible to use esp32 marauder without flipper zero?
Question, I used flipper zero extreme firmware. Why do I need to flash the firmware just to enable a feature? If I flash to this firmware can I then go back to extreme and still have it or do I lose it? It seems pretty ridiculous that you would have to commit your entire firmware and user interface etc to just one feature when this should really just be an app or something. Please help
My firmware has nothing to do with what firmware you have installed on your flipper. Watch my most recent video
Ok i want to use marauder frimware on esp32 board without screen and flipper zero, only using mobile phone where do i find the firmware kindly plz guide
Thank you for your explanation.
It works all fine without the connetction to the MarauderOTA wlan connection.
I could see it, but I can't login with the given wlan key. I also have tried it with different Laptops and Phones, with no differnce. Any idea what it can be?
Thank you in advance for your help
Found the solution after a lot of trail and error.
You have to manually change the ssid and password in the script. After this the connection will work.
I have a few questions, Am I supossed to have a bunch of links in the board manager URL's, I had zip, zero, and I downloaded the 3.0.0a version of esp32 by espressif systems, am I going to die. will those work, I am not a software guy so this is all new to me. Thank you.
I know this is a dumb question , but I am stuck on 3:22 on selecting the port by the wifi dev port. What is that? :/
Im one minute and 3 seconds in and you got me ! NICE!!
im still receiving the error " exit status 1
Compilation error: exit status 1" i did notice it pop up in the video- is that right? the wifi ap does not show up
Can you install the marauder firmware onto the dev board via Android?
mine keeps coming up with a error code everytime i try and even when i plug mine in it doesnt have the dev board in the port section? im on mac
Do you think its ok to download updates for the flipper directly from the app they provide, or would it be safer to "update from file" and not connect the flipper to the app? Or does it not matter? Just in terms of privacy etc I mean. Thanks
I'm not the best person to ask for privacy. The firmware released by the flipper team is tested so it's probably safe to install directly from the app. I don't use the official firmware in mine though
@@JustCallMeKoko bro I wanna buy a flipper what’s the first thing I should do ??? I would love to have try everything possible with it like the dev board I just don’t understand everything you guys say
@@JustCallMeKoko I also am wondering do you need a pc or would a laptop work for updates and setting up the dev board soo on
I know that bruteforce is not an option, but what about dictionaries?
Not sure why, but I get no internet connection when I try to connect to the marauderOTA. I'm absolutely new to all this I'll reference back and see if I messed anything up. I'll probably figure this out once I have more time under my belt with it.
I dont even see the marauder OTA as a network
hi could you help? my module isn't appearing in ports... I'm using Mac Thanks
3:46 : when adding the code to the Arduino IDE window I get this error message, not sure how to proceed from here, Can somebody point me in the right direction?
I’m a huge fan Koko!
Happy to hear you're enjoying the content
when i paste the code after install 2.0.0-rc1 and then his upload. it says:
exec: "cmd": executable file not found in %PATH%
Compilation error: exec: "cmd": executable file not found in %PATH%
just a question:
where exactly is the location for the saved pcap files?
I can't find any in my sdcard inserted in my flipperzero after I performed the various attacks...
thanks a lot!
The SD card on the flipper cannot be used by the wifi dev board. At the moment, the wifi dev board is incapable of saving pcap files
@@JustCallMeKoko daaamn
@@myfaveyoutube but you can solder on a SD card Breakout board to the wifi dev board :)
I know this is a older video, but is that a Sangin Instruments on your wrist?
Hello bro something that serves to turn on and open car?
Give us some more flipper zero videos!
Working on it
Where did you get that led scrolling display?
I built it from some LED panels I got from adafruit. I actually have a video here about it
im able to connect but when isend commands nothing happens except the number next the B goes up and the LED light blinks. whats going on?
Did your wifi board come with the black plastic cover or did you make that?
I printed it
@ 3:00 Why that package? That one only? As opposed to a later release where more issues may have been patched? This video IS a year old. Maybe an update video to reflect newer changes...
Made it all the way through the instructions but when I try to connect to the MarauderOTA wifi using the credentials provided, I get a message saying "Can't Connect to this Network". Not sure why. Anyone get this an know what to do?
following the steps however when you mention to select port it doesn't show any port with labelled module however it definitely detects it within device manager port 4&6 appear when connected and disappear when disconnect and its not running through a hub either..
I was having those issues until I installed the steps 5 and 6 CP2110 CH340 drivers. My device changed names from Blackbox ESP32 to ESP32-S2. Also note You will probably get an error during the upgrade! It still worked the error meant that the board cannot reboot and you have to manually reset it. If you watch Very close you see a Red/orange Error bar in the video show up around 3:46
@@pyrophreak2600 had to hold down the boot key and insert usb to get it to label device and then followed all steps right to the end i thought I bricked it cause no LED pops up and had the hardest time getting it to read on the desktop but looks like flipper responds to commands so i guess it works
compilation error redefinition of void set up
what does this mean and why do i keep getting this error message from arduino?
you had me at "social skills"
Normally that's how I lose people
I cant flash your bat file 😢 idk what to do anymore . I follow the wiki and your videos but it doesnt work ....any tips ?
whenever i download the firmware, the marauderota doesnt appear, any ideal why?