Metal Morphing! | Stretching Out Dents!
Vložit
- čas přidán 5. 05. 2021
- I'm going to show you how to use a strong metal morphing technique to reach the trifecta on this no-paint dent repair. An I-Bar tab to stretch out the dent, as well as a hook to bend and a hammer to straighten.
Training Email Me
tinyurl.com/36529zkp
PDR Training secretpdrpaintlessdentrepairtr...
Collision Tools
pdr-training-tools.com/en/
Auto Body Suction Cup Slide Hammer for Dent Repair
amzn.to/3tBPtj3
Dewalt 20V Cordless Polisher
amzn.to/3QjM2aH
Plier for rolling sheetmetal edge
amzn.to/3mP5pegn
4oz Ballpeen Hammer
amzn.to/3mOL8p4
Gorilla Tape
amzn.to/3aViJLf
Soft Hammer
amzn.to/3mOnHMw
PDR Knock Down
amzn.to/3aYS5Bo
www.39-mobile-paintless-dent-...
dentdiscountmobileandbodyshop...
www.yelp.com/biz/dent-discoun...
www.yelp.com/biz/dent-discoun... - Auta a dopravní prostředky
My father was a fender body man for 50 years. I wish he were alive to see this kind of work! I seen him work magic on the older heavy metal panels of the older cars and trucks. Fix holes, stretch and shrink metal, anvils, pick hammers, flat head hammers he had em all. All his tools are safely stored but I have no idea what to do with them almost nobody does hammer nobody work with the new thin high strength memory steel used these days. To be honest it's almost unbelievable to see you do this kind of work! Extremely well done video and great content!
Your dad was the man!
it's not worth the work.Old-fashioned.............
@@wilsoncougar4267oh it’s so worth the work. You won’t find it in a collision shop but I work in restoration and you damn bet we hammer them as flat as we can
Fake?
I love this video
I have been doing auto body/collision repair for forty years and never would have believe this had I not watched it with my own two eyes,that was amazing to say the least,I subscribed
Manofsteelpdr.com
I appreciate your comment larry
If I didn't see it I would never believe that was salvageable. Incredible work!
Es muy cierto por eso digo que me quedé como rgum preguntándome cómo lo haces buen trabajo maestro
Want to go to work on my car some idiot hit me hit and run driver they want $2,000 to fix it
It's refreshing to watch a quality bodyman make a repair--AND--without needing paint !! YOU, sir , know your craft !
as a red seal body tech I am offended by your suggestion that we don't do quality work....
He’s not a body man, he’s a PDR technician . This repair still needed paintwork and probably a skim coat, but he clearly stated the customer wanted a 90% repair and didn’t want to pay for a flawless repair. Paying attention helps
Sir you are a metal genius we need more professionals like you
I do have to say myself the man if steel is more of a wizard of metal. I'm 56 years old and been doing body and paint work since I was 13 years old, specializing in restorations and customs. I used to think I was above average at working metal until I watched him in action and by far I believe he's the best I've seen.
Thank you for your comment
I have to agree. He is VERY good!
This the first time I’ve seen a full video like this and super impressed. Really helped out a lot.
PDR Training Message Me Here!
www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/
Seriously man, at this point, it’s beyond skills or art, it’s either magic or alchemy.
Laugh out loud funny thank you for your comment
Cool
I swear 👌
It's called "memory "
3@@gedsterged4763 5.5.
The man of steeeeeeelll. You’re a legend! Incredible content and the passion you put into your videos is incomparable! I’m subscribing in hopes to be a fraction as good as you are in dent repair.
Even after all these years it's still satisfying watching them pop out lol
You're an artist, bro. If this is 90% you have a lot of pride in your work.
WoW! I didn't think that was possible to come out so clean. There were so many potentially nasty areas - tight creases being the worst. Well done - magic AND alchemy! Greetings from an autumnal Britain.🙂
Thank you for your comment I really appreciate it
IMAGINE RAW MATERIALS SHAPED 2 FORM THE VEHICLE...
@Jay O they are stamped. Not very spectacular. This repair however is very spectacular!
I was having a crap day until I got notification of the MAN OF STEEL had posted :) You made my day cheers Superman
Kevin right on you made my evening with your great comment.. thank you
30 years + body shop owner. I am impressed! Liked and Subscribed!
Welcome to my channel thank you for subscribing
I finally did PDR for the first time. I can’t believe how much it works. I use to work at a Corvette body shop for years. We always replaced stuff or broke out the hammer and dollies to straighten metal then the stud gun and on to bondo and europrime and guide coat and into the booth it went.
My kids car was blasted by a lady that ran a stop sign making a left into his drivers side front tire.
I spent the weekend replacing suspension parts and using epoxy to fix the headlight. I decided to give PDR a try after seeing your videos and buying the tools from Amazon. I have to say I was shocked at what I was able to do with no paint work. You can’t even tell it was hit.
I spent about 30 minutes with my buffer and some pads with superduty and finishing compound. It’s like it was never touched.
I just wanted to say thanks for the videos. I learned enough watching you to do this on my own and the results were amazing. My kid still thinks I replaced the fender and bumper. That says something about the information I picked up from your videos.
New to the channel and about a year and a half into body work. You sir are already making my life easier. Killer skills.
Josh Welcome to my channel thank you for subscribing
Dude that was awesome thanks! This cuts down on repair costs ! Your on a gold mine with that ! Totally amazed 😲👏
This is an amazing talent that few people have, much respect.
It's amazing how easy, a competent/skilled worker makes this look.
Very nicely done
Seriously this was a piece of work that was not near but beyond perfection without any teardown.
I wish I could learn this art technique from you.
New subscriber and I have to thank you immensely for your videos because they have taught me so much! I'm used to working under the hood, so body work has been a who new ball game for me, but your videos have been great and saved me a ton of money
Manofsteelpdr.com
I appreciate your comment.
Aileen thank you for subscribing
Good to know still some people are this talented, patient, and not just a replacer of any damn thing!
You earned a new subscriber. Amazing repair work. Watched you fix a quarter panel on one right before this I basically laughed when you said it could be done. Being in the collision repair trade for most of my working life I didn’t think it possible without paint cracks or super stretched metal. It was immaculate when you got finished up, figure this fender you could do with eyes closed. Thank you for sharing your talents with us!
Thanks for the sub!
Great video. I'm normally an engine guy, but this video was really interesting. Wish you would have shown your hammer in focus. I would like to have seen the end of it a little better.
Wow, I never new that the dent repair has arrived on this level. Thanks for sharing your ways. Not that I will ever do this kind of thing, but I subscribe anyways. :)
Manofsteelpdr.com
I appreciate your comment.
Welcome to my channel thank you for subscribing
This type of repair is old school. The problem today is the younger body techs want the easy way out, replace and paint.
Insane SKILLS!!!!! You are as much a wizard as a tech. I have done body work 35 years and I can't pick and file bare steel as good as you repair a painted surface.
Glad I found your channel. I appreciate the metal work. Anyone can slap mud on a dent but this is amazing.
Based off how long that tape has dried on the bumper, he hasn’t seen his friends and family in a long time anyways hahah.
Great job as always!!
Paint society thank you for your comment I really appreciate it.. I believe if I’m not mistaken you have a newborn.. congratulations!! thank you for taking the time to post
@@DentDiscountPDRBodyShop love your energy in the video. Man of steel. Yahhh!!! Thanks for the support.
@@DentDiscountPDRBodyShop Is m CCD 8 is the best thing
Bryan watches you too
Lol
Brian I was thinking the same exact thing but you know man of steel has to Hype up the Video.
New sub here. I’m not sure how I found this channel but your work is next level. I’ve done a little dent removal in my time but nothing like this. You are the Man of Steel. Just wondering how much the typical dent removal cost?
Manofsteelpdr.com
Thank you for subscribing
I appreciate your comment
$900-$1200
@@DentDiscountPDRBodyShop I am a new subscriber. Would this work on a car that had been repainted? Assume it had filler, epoxy primer then base and clear. I am guessing filler would have cracks preventing a perfect repair? Also, I believe you said customer wanted 90 percent repair ... how much extra to finish it to flawless like it never happened? If you were near me, I would be sending you my business. Really enjoy watching you work.
New subscriber. It's awsome how much pride you take in your work that you've turned dent pulling into an craft instead of taking short cuts or RnR the area and charging an arm and a leg.
Manofsteelpdr.com
I appreciate your comment.
Thank you for subscribing
New subscriber, as a cold rolling mill operator ive got a great respect for how you morph and manipulate this magic material!
Manofsteelpdr.com
I appreciate your comment.
Noah thank you for subscribing
😁I love that :"it's too easy to replace the Fender"💪
Right on GT auto repair and frame thank you so much for your comment..
This mans a bloody miracle magician..This was incredible watching.Thankyou.
I was looking on CZcams how to remove my dent myself. A friend of mine had backed into my side door panel. I happen to stumble upon your channel. You're a magician! It's an artform I can get behind! I love stuff like this. 👍 New subscriber.
Julie Thank you for sharing on my channel.
The man of steel does it again
It's unbelievable 😲
Great work your a artist of metal
I will try this on my car thanks
If I had a fraction of this knowledge in how to heat, shape, and manipulate metal, I would never have to worry about where I park to avoid door dings. This level is only achieved after years of hard work. New sub here.
AMAZING WORK, MAN OF STEEL DELIVERS WITH CONFIDENCE!
Had to subscribe! Ive watched alot of PDR techniques but none with the degree of talent you have. Thank you for sharing your knowledge in a time when most keep their secrets to themselbes. You are a talented and kind person. Thanks
Just found this channel. Love it. Subscribed instantly because, yes, not every panel needs to be just discarded and replaced. Awesome channel
Manofsteelpdr.com
Thank you for subscribing
I appreciate your comment
First timer here. Awesome job! It's nice when you're working with the right tools.
Just came across your channel. I'm a car mechanic. Just know enough of bodywork to know how difficult it is, and that I'm not good at it. We take our cars to bodyshops. None of them came out as clean as your results. Very very good!
You're a genuine Metal Morphing Power Ranger; AWESOME! I am truly in awe of your work.
Wow, thank you!
amazing skills , God bless you !
Your not only a paintless dent repair guy, but your also a poet with explaining how it's done.
Thank you my friend
You’re**
I do like your channel and your attitude! I never realized how hard is to do body work and how artist you should be to be able to pull that off! RESPECT FOR YOU! Subscribed!
Manofsteelpdr.com
Thank you for subscribing
I appreciate your comment
what a job !!! respect for curves, angles ... and without damaging the paint !! great job and congratulations to the "artist"
Thank you
Amazing how far the industry has advanced from drilling holes, screw-in slide hammers, and Bondo. You've obviously done collision work along with pdr. Combination of great stuff
His non-flawless repair work is so excellent that I think I would NOT do the flawless repair at all! I am truly amazed.
Hey man this is John I came into your shop today with my jeep. Thank you for your advice. I’m now a new subscriber! Can’t wait to see more videos!
Manofsteelpdr.com
I just showed Leslie your message she told me to tell you hi.
Thank you for subscribing
I appreciate your comment
Masterful ! Also, I can't be the only one watching the end like ASMR. So satisfying to watch all those dents being straightened.
Thank you for your comment
Fantastic work
Amazing I recently got a small dent in a parking lot. It was from an older man, and I just couldn't make a fuss. I'm going to try this, it looks like such fun! Thanks so much for the encouraging video, again just amazing! Dan S.
Thanks for your sharing knowledge!
This dude knows his craft. Cheers!
Thank you. From BC🇨🇦.
You’re one hell of a an artist that’s an excellent job!!!
I just tried something like this on my work truck fender. Ended up caving and paving. I don't know how you guys do that. Nice work.
I have been a professional locksmith for over 25 years and like you, having the passion and dedication and the ability that set's us apart from the others in our respective trades although very different is the ability to think outside the box and approach and accomplish jobs that others have either given up on or just afraid of taking on in the first place!
I'm 7 years away from retirement and have practiced pdr on all of my families vehicles for the last 5 years and love it enough to hopefully get into pdr full-time when I retire if my body permits me to, ( I've had several back surgeries and joint replacements that your videos have been so inspirational to me to not give up) you are the perfect example of true persistence and incredible ability!
Please keep making the best videos on CZcams, thanks!
P.S. I would love to visit you with my son one day for him to see a true pro in person! Keep up the great work.
Manofsteelpdr.com
I appreciate your comment.
I’m glad I can be an inspiration to you and your family. I am in San Jose California
That was impressive af. Anyone can paint a replace a NEW fender. This right here ... that’s TALENT !!
Manofsteelpdr.com
Thank you for subscribing
I appreciate your comment
This is really something sir, my daughter's first car she paid for on her own got backed in to. Now she's on honor student at a high level college getting her masters, holding a job making her way. Unfortunately, just a week prior to her being hit I canceled the collision insurance, so dad is really trying to come to the rescue. I am a.single dad of 7 kids git one through college and 2 in college so ends are becoming tough to meet. She's driving a 2012 passat and really loves it, so looking at some of your videos I am using some of your techniques. This works amazing!! I am half way through and want to invest wisely in some tools. Any insights or direction you can offer would be more than appreciated. Thank you so much for the help you have given already. It's very much appreciated.
I have to say your the best there is bro. I have seen many people do this. But you got this down bro. Hands down man.
Manofsteelpdr.com
I appreciate your comment.
Mad skills. Great work
Yet another epic dent pull! Your approach to dents like this is very well thought out and you make it look effortless bud!!
Awesome to watch!!!
Manofsteelpdr.com
I appreciate your comment.
This is the best PDR video ever seen on earth. Excellent subscribed.
Wow, thanks!
New subscriber -- I've watched several of your videos and you are a master magician with PDR tools!
just amazing. a real craftsman
Absolutely amazing, this is the bodyshop of the future, had a PDR man I use save the roof of my classic car after a car bonnet fell on it which was tied to the garage roof, he did an awesome job, I buffed up the roof and it's perfect, but this is another level
Manofsteelpdr.com
I appreciate your comment.
Magician at work! Great job!
The man of steel
Is amazing ! One of the best ! Honestly
Amazing skills. A true metal surgeon.
Thank you
Wow, awesome work. Thanks for sharing your skills 👍🏻 ❤
You never cease
to amaze me!
new sub here. loving the content man of steel. I'm just getting into body work myself and you sharing your knowledge with us is appreciated. thank you
Dent magic, thanks for showing us your skills, I’ll be sure to remember these techniques.
Thank you for your comment
Brilliant, your an artist.
This stuff amazes me. That is masterful work.
always the best.
from algeria.
respect man
You sir are the champ with great skill and the oratory power to go with it. Salute.
Manofsteelpdr.com
I appreciate your comment Raj
Absolutely nice work! Great man. Regards
you are brilliant man 👍🏻, I shall call you "the man of the dents art work", keep up the good work
Thank you
Amaging work ! Very satisfying to watch your videos
Very helpful and explained techniques !!
Thank you Carlos
New subscriber!
Just purchased a car for a deep discount because there was some ‘serious’ damage to the body. The right rear quarter panel has a huge dent. The right front fender and hood are pretty mangled. The right lower door frame is slightly accordioned. Gonna spend the winter slowly working on all those dents. I can’t wait to see the reaction from the previous owner next summer. He honestly thought it was too much work and too expensive to even bother.
You’re videos will help get me there! Thank you for what you do and providing us with a view of it and explaining it all!
Thankfully the frame was not harmed.
He will never be back. I've heard the "do the best you can" line a million times
This guy is a professional!
Artistry, Beautifully done!
Thank you
I realy love this chanel,thanks man of steel
Truly amazing mate! How long did it actually took you to finish this job?
Crazy cool just can't believe the great work you do
My hat off fella. You have some serious talent mind blowing
impressive work and proper procedures were followed and making a successful repair.
Thank you for your comment
That’s awesome , I would like to see more of this type of video.
Manofsteelpdr.com
I appreciate your comment.
Superb work! Awesome technique!
Manofsteelpdr.com
I appreciate your comment.
the final touches were terrific
Good job my friend, from San Francisco California I am first timer you’re a positive man I like that! Thank you I will keep watching your videos!
Welcome to my channel thank you for subscribing
wow you are a genius sir, what a skill !
YO YOU REALLY ARE AN INSANE CRAFTSMAN AND AN EVEN GREATER INFLUENCE TO THE YOUTH TODAY. I SALUTE YOU SIR.
Wow that was truly awesome. You are a true craftsman. What a skill you have developed.
Manofsteelpdr.com
I appreciate your comment.