Fast Mini Bike Gets Gets 3X Horsepower! 225cc Race Engine Swap!
Vložit
- čas přidán 24. 08. 2024
- Our Trailmaster MB200 mini bike gets a high performance engine swap and nearly three times the horsepower compared to stock! This makes for one fast mini bike engine swap. Starting with a 6 horsepower Jaing Dong 196cc engine, this mini bike has a top speed of just under 40 miles per hour. When we swap to a built 225cc racing engine, we weren't able to do a top speed run, but we found out that this mini bike does burnouts all day long!
Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: bit.ly/3T8njaF
----------------GO POWER SPORTS PARTS IN TODAY'S VIDEO---------------
MB200 mini bike: bit.ly/39X4Pmm
Tillotson 225: bit.ly/38VCvzv
Go Power Sports: bit.ly/3QKyODE
NEW MERCH: www.cars-camera...
Equipment we use: www.amazon.com...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.
Can you guys do more engine modifications. Like filming the engine polishing and port matching?! I know I would enjoy seeing more of that
Im very sad/disappointed, they didnt show that. :(
They have done that before in other videos also perhaps they wanted to just get it done instead of it take 5x as long with filming
SimplyAnalog truuu but, more content. More money happy viewers ;)
@@simplyanalog They also did laps on mini bikes around the yard in other videos. That doesn't mean I don't want to see them doing it again.
For me this channel is all about the wrenching.
@@Chris-yy7qc But it's not your channel, we don't pay to watch so if we don't like we don't watch
Too much wheel spin to get a clean lap! This is going to be one mean race bike!
Ok...i need your help guys pleeease 🙏🙏
I live in Paraguay... bought my kid a 150cc kart with a gy6 engine. It is a cool kart, just slow as anything!
Reverse...it flies... forward...does not. Can you give me any tips please on what i can change on it to go better please 🙏🙏 it is currently stock!
Go power sports will probably have a bigger engine
Now you need some proper tires, with grip.
@@warrenwebb1467 Possibly a big bore kit or.. Some torque converter tuning. Ask the place where you bought it for some upgrades
Guys PLEASE make some off road mowers for the woods!!!
“Don’t do what we do do what we say not to do” ~ Isaac 2020
isaac for president 😎
doesn’t that just mean we should do it?
@@garbagesmell4939 yes
Consider it done.
Like Vice Grip Garage "Don't do what I do. I'm an idiot!"
When you watch them insult the only welder you have😭
ikr most of us are poor $180 is a lootttt of money
Can you use this welder on 120v outlets?
@WHATS YOURSOC you dont know how to weld. Ive used Miller and Lincold Electric and Hobart. Great welders!
I have a Titanium Unlimited 200. Welds just as good and is adaptable to 120v/240v....
@@jacktheripper6610 It does!
🤣
I have one of those welders. If you get some lincoln wire and set it like it says under the cover, it actually welds fantastic. The cheap wire that comes with it splatters very bad and doesnt make a nice bead.
where’s the diesel? i really wanna see it turbocharged
It was so cheap it probably blew up
yes that would add so much power. and it needes a proper clutch/torque converter
When are you guys gonna bring puggly back with a 140cc or a 190cc Daytona?
You were a close first but not, I am!!
Where's all the film from the motor work aka porting and polishing?
If only they could make a billet flywheel with a lighting coil.
I see you guys like putting 212 and stuff like that and your go karts and mini bikes be different Straight Out of the Box put your little 10 horse diesel motor on the MB trail bike and be different,
@@anthonystaab1604 do you mean a power generator/ supply for lighting??
If so i been hunting that set up for a gx100 or p79 or any of the gx100clones...
You got a nice place John! Love the pond in the background!
8:24
A lot of DIYers can relate. And people like me appreciate it.
As James at donut would say, thats SOME MO POWER Baby!!
Aydan Angus tru but cringe
MOPOWAHBABEH
@@ollilehtonen6764 lightning! lightning! lightning!
@@aydanangus thunder! Thunder! Thunder!
I think you guys are underestimating that cheap harbor freight welder. I’ve been using their cheapest welder their flux 125 for about 9 months now and I think I’ve only had a couple of beads snap and that’s only because the beads were bad. But once I can get a good bead down I haven’t really had any issues with welds snapping.
I run flux core wire all the time they just had the heat to high flux core wire tends to weld hotter no gas coming in to cool the weld.
Little typo in the title you guys, “gets gets”
Hadesx Pain just a little one 😂
No, they just emphasizing the hp increase.
nothing better than gettin your exhaust port polished.
It’ll be fine welding on cardboard on a wood deck love it
Don't worry, the dried pine needles are catching those sparks so they don't get too far. :)
@@TebbieBear lol
That lil tykes cart looks like one of the old T-bucket rods. Everything you two guys do is bad ass. I used to make urethane skateboard wheels back in the 90s. I have a 12×12 box of a variety of size wheels. I think from 35mm to 65mm. If I can find them I will send them to you guys. I noticed you use them for tensioner wheels etc. Keep the videos coming guys. You are the coolest guys on CZcams with the coolest job I have ever seen. Thanks guys. PEACE!
Thanks
Hell yes!! Best video in a while! No parts, no tools and no plan
It's small but very strong powerful.
That's what she said
run out to a big box home improvement store and get a 150' of 10-3, or 12-3 insulated wire, a heavy duty 30 amp plug, a metal outlet box and a 30 amp 110v outlet to use as an extension cord. if you get 12-3, you can use it to wire your shop when you're done with it. it's not like you're not gonna need it then. no more multiple powercords lying on the wet grass, you already have a good start on your wireing needs and no destruction of things plugged into a long ass extension cord due to voltage drop. win/win/win. this thing is gonna be a full on beast!
John looks like a robot in that suit and helmet. 😂
when you're too early to chose video quality options lol
Just realized these 2 remind me of myself and my childhood friend when we were kids. Similar demeanor of both. Good stuff.
Small thing that most probably wouldn't have paid much attention to, but I appreciated it, John, when you correctly said 'one fell swoop'. Weird thing to bring up, I know, but I was so bloody glad to hear it! ha ha, love the channel guys
I can't wait to get the MB200 guess I have to go back to my performance mods this year.
You guys should get a concrete slab at the front of the new HQ, and put a roof over the top, that way you have a good work space where you can weld and paint outside
Doin the donuts made me think of Hot Rod.
You will get the new place in shape it will just take a little time. You have to crawl before you can walk. I think its awesome you guys deserve it all the years of hard work is starting to pay off. Stay safe stay healthy!!!
New shop blues. Great times
That's badass. I'd ride it everywhere
Change out the welding wire for some name brand wire like Miller, and the welder will work much better.
Wish yall would make a mini bike trike out of one of those style enduro bikes with a big engine on it
That engine looks like the perfect fit for this bike. I'm excited to see the progress on the new play space!
when you run a high load through a long extentioncord it will draw a lot more amps than through a short cable , the cable will become realy hot too (can catch on fire actually )
friend of mine tried to build a steel boathull in his yard and the fuses he popped using his stickwelder just about equalled the costs he saved by building the thing himself , in the end he just put a lighter fuse at the end of the extention cord as it saved him a lot of walking back and forth
might help is you use verry thick copper core high amperage cables instead of household extentioncords (should a lot saver to just run a pvc groundcable across the yard even if it doesnt look good )
as for running power to the shed : it might be a good idea to burry pvc pipe intoo the ground thats oversize compared to the line youre going to run through it
that way you dont have to dig up the yard again to extend more stuff like telephone/data lines/alarm system or add an extra powerline (do put the ends above the field and cover them up so the pipe doesnt fill up with mud or water over time )
house seems to be build at a pretty nice spot , i wonder if thats allso included with the place you bought
Ohm's law. Volts x Amps = Watts
It's the voltage drop that makes the amperage increase to do the same work (wattage).
You need power in a shop. Bury or string overhead some twisted supply wire from the panel. Use a wire sized for your new panel, I would use a 200 amp with at least 40 spaces. Add an additional #6 ground wire for a sub panel in the new shop. It will also need a ground rod at the new sub panel. Do not bond the neutral at the sub panel.
@@michaelvangundy226 seems youre more familiar with the american codes then i am (european)
perfect location for a solar array and a Tesla power wall...then they could run a cord to the house to run lights if the power goes out
Just when I started really getting into the sexy engine montage they cut and it was all done! I want More!!!!!
All I can say, is it needs a tire on the back with much beefier knobs that can handle the power. Especially in the mud, fish-tailing on a bike ruins the fun. :)
I cant wait to see how the shop turns out. It really is how most of us started out.
Greetings from the UK :)
Buy a small generator and temporarily run it off that, also that allows you to have a Fab/repair area at your events. A cheap hitch mounted bender would be another useful tool.....just a suggestion!
buy a cheap bike lift while you are there, as a retired mechanic, my back and knee's hurt watching Isac work on the ground.
Breaking in a new block carsandcameras style. Just send it, It'll be Fine! Haha
As much as you guys over years have used and talked about HF tools and predator motors....they should sponsor your shop with a full ICON load out. All said and done...it’s a ~$1000 sponsorship. You guys have helped a lot of home brew projects become completed by using HF equipment.
Look at the rooster tail coming from the bike!!
LOL, I never get tired of hearing Isaac say "the important thing to note here is: "
I love watching you guys starting over. It reminds me of me now!
Please show us a top speed run on pavement and let us know what size sprockets are being used on it
cars and cameras roadkill edition!!!!!
I saw a pond in the background y’all should build a boat with a predator or something!!!!
The blacktop out there is calling boys!
In these troubled times we can always count on an entertaining vid from c&c! Stay strong America! 👍 I bet there are lots of kids and dads staying home and fixing up the old bikes and karts!
2 nice cars to work with in the background and we're wasting our time on mini bikes.LOL
"Do what we say not to do."
Cool pond behind the garage. Boats next?
Welder setup is 90% of the weld.With proper setup that welder will do great just gotta get it adjusted correctly
wait all ike did is remove the head we didnt get to see any of the porting or re build of the 225 what up also you videos are too short
okay stoner 14 year old
Small motor tuners want the deets..
typical CZcams videos for the best profit, anything over 10 minutes or so is around most peoples attention span. so making short videos is best for the man power they have and lets them create more content for profit (ads).
You guys might want to keep practicing on the mud it might be raining in oregon that day? advantage.
you guys should find one them little 2cylinder boxer engines for a build, like one them onan engines
Ok John and Isaac. First still stoked for you two and the New HQ and the success of the channel that you guys are having. Loved all your builds of course some more then others. But here's the meat and potatoes of my comment. I've well we all have asked nicely a few times and feel like we are wasting my breath. So now you left me no choice in the matter but to ask.....
SUPER DUPER EXTRA NICE....LOL...CAN WE PRETTY PLEASE WITH TWO CHERRIES ON TOP CAN WE PLEASE HAVE A UPDATE ON YOUR BEAUTIFUL TRUCK....
Hes doing a video on it. It coming along nicely
He's going in circles!
Your channel is awesome, thank you John and Issac.
I have a shop that has sub-par electrical feed and i use a generator to run the welder. That one that is under the shelf would be a prime candidate for that exact resolution.
What about a proper frame mounted fuel tank?
Awesome dude's, a real channel with real guy's ✌🏻🏴stay humble
I would love to see more of the property and the house!
Can u make a yard kart with a shifter because that would be really cool
If you are going to take that to Oregon you better get used to driving in those conditions. Living in Oregon I can say that is fairly common
Fun fact- gorilla snot is actually a sticky substance that drummers use to keep ahold of the drum sticks when they play drums
You've mentioned "the house" a few times, and we've caught glimpses of it. But, we're dying to know something more about it!! Thanks for another great video!!!
pretty neat little bike
If you dimple the intake side like a golf ball it does improve flow just a fyi.
Nice looking property. You going to give a tour of the house. Also could use a more aggressive rear tire.
I love these mini bikes, once my trike is finished im looking to get one.
It may feel sketchy now, with a little practice, you'll be WFO and shredding bro... Don't carve to much until you get used to it. Then you can rail it in the corners.... Braaap..!
New tyres bros!!!
A lot of room in that frame a 350 from a dirt bike would fit nicely
That is the first mini bike that can actually throw dirt burgers to the guy behind you.
If you want a faster time in wet conditions or just in turns try weighting the pegs if it works for a dirtbike it can work for a mini bike but just try weighing the pegs
Grip it and rip it don’t be skert lmfao
You know it’s bad when Issac just walks it back to the shop lmao
when you can never remember three numbers it solidifies the suspicion of marijuana use.
Nothing wrong with that
@@Todd_G_FPV Give it a few decades.
What am i waiting for? world peace? Lol everyone will be chill in few decades
All this comment shows is that you're clueless about marijuana users. My buddy is baked all day every day and has a mind like a steel trap, never forgets a thing. The "forgetful stoner" stereotype popularized by media is a false representation of the majority of users in line with the "Reefer madness" propaganda used to discourage exploration of its benefits. People who drink alcohol on the other hand....
Lol ive been smoking 20 years and remember more than most sober people i know. Have no problem pulling something apart and putting it back together. Everyone is different tho, some smoke and cant figure out where their ass is lol
I got one of those welders on black friday, tremendous machine for quick and thin stuff
OMG, put your feet of the damned pegs!! LOL
Great job boys! Enjoy every second!
Can't wait for the race. See you guys there! The competition is going to be rough this year
I wanna see more phatmoto Isaac!
If you're using a flex core while the best thing you can do is clean your metal to bear new Surface and try to remove any and all gaps before you start welding
Definitely a cool testing ground, a new shop with electricity gonna be nice 👍
Thanks guys keep doing good
Great work guys looks like a blast that bike is so fast now you guys are awesome be safe out there.
"Do what we say not to do" OMG LOL
"All we did was throw a motor on it..." ya a $500 motor. On a $900 mini bike. "Reminds me of our roots " except that it used to be no tools no plan no problem. Now its plan. Parts from a sponsor and every problem we now throw money at.
Paul C. Reilly They have been busting their ass putting out 2 videos a week for years. They landed a great sponsor and we get to see them build some hot rodded go karts and mini-bikes. If you don’t like the direction the guys are going or think you can do it better, make your own videos.
Paul cry about it dude. Who are you to say how they felt in that moment? Just because it isnt exactly the way they started, obviously because they've progressed alot, doesnt mean it didnt have a nostalgic feel for them.
Good stuff and can't wait to see that beast in good conditions.
Make a vid of you showing us the whole property
Another great video guys
somebody buy these guys a portaband
So.any pavement access for top speed runs nearby?
That's crazy fast
"Do what we say not to do"...? LOL! Ok!
I haven't seen a drop of lock tight used.
Get some nice tyres for it. Them ones are really restrictive
You guys need an ace driver who is willing to send it in any condition. I am here to volunteer for that position. I feel that i am qualified to do just that
Test Pilot/Stuntman
I personally prefer the term "send doctor"