Toyota does not protect this area from rodent infestation because the drains for water going into this vent on each side are open and large enough for mice/rats. When they get in here, they have access to your AC blower (if you are lucky you have a filter before that but they can also eat their way through the filter)
Reinaldo Gonzalez - You do realise that this car he is working on it just scrap right? The entire bonnet is missing and when you look at how old the engine is, it clearly has not been driven for years.....
@@killbot86 still...all the debris thrown into the engine should not be shown to someone who doesn't know how delicate car engine are these days. All plastic crap.
Thanks again ad always, Peter! 👍 Can the rubbish that accumulated affect the operation of the blower motor,? I recently have a lot of vibration from the blower motor ,feelable in the steering wheel. Specifically when i turn up the AC. Take care!
Is there any torque requirement for those small screws that tight down the filter net and the 2 wiper arms ? How much torque or just hand tight for them ?
Thank you so much for helping me and many others understand how to fix our cars. God bless.
Noted 👍
I don't give a damn about the comments , you helped me a lot .i appreciate that Thank you my friend .
Thank You. :-)
@@PeterFinnTheCarDoctor I agree. You have helped me a ton a well. Thank you!
Toyota does not protect this area from rodent infestation because the drains for water going into this vent on each side are open and large enough for mice/rats. When they get in here, they have access to your AC blower (if you are lucky you have a filter before that but they can also eat their way through the filter)
Thank you for detailed video. Mice made a home in the intake and this video helped greatly in helping me to evict them. Many thanks.
Thank You for comment. :-)
Thank you for the video. Honestly, it was a big help.
Great info and Thank You. :-)
This is a helpful hint, no matter what anyone says
Hi my Friend. Many Thanks for Your comment. :-)
Thanks for the instructions. This will help me out a lot
Glad it helped
Very good video thank you so much I was needing to do this to my own vehicle and then is just what I needed.
Instablaster...
Peter, to clean those meshes you have to do it outside the engine you are dropping more trash to the engine.
Thanks Sir. 🙂
Reinaldo Gonzalez - You do realise that this car he is working on it just scrap right? The entire bonnet is missing and when you look at how old the engine is, it clearly has not been driven for years.....
@@killbot86 still...all the debris thrown into the engine should not be shown to someone who doesn't know how delicate car engine are these days. All plastic crap.
Just did ine yesterday thank you !
Great job!
When knocking out the debris you shouldn’t do it over the engine,
Noted 👍
Scotty yells; Peter mumbles.
Thanks for info 😊👍
Oh wow! Great work. Very hard to keep it clean!? No wonder cars all have that smell
Yes, thanks
Thanks for this. It helped me realize it's time to buy a new car. Enjoy working on your car poor people!
Happy to help!
A little vacuum would give better results.
Thanks for info. :-)
That was my first thought, but as someone else pointed out, this is just a junker car he's using to make demo videos. Thanks Peter! This was helpful.
Thanks again ad always, Peter! 👍 Can the rubbish that accumulated affect the operation of the blower motor,? I recently have a lot of vibration from the blower motor ,feelable in the steering wheel. Specifically when i turn up the AC. Take care!
Noted 👍
Compressed air would be useful for cleaning out screen(s) for intake.
Good call!
Yes, helped me very much thanks!
Hi Peter,
is there any way to clean the ac evaporator for the same car ( corolla e110 ) without removing the whole assembly?
thank you.
good work
Thank you! Cheers!
thank you for video!
My pleasure!
Thank you my friend Peter!
Thank You for feedback. :-) Best Regards Peter
Is there any torque requirement for those small screws that tight down the filter net and the 2 wiper arms ? How much torque or just hand tight for them ?
Just use the German torque specs, Gutentight
LMAO ! Gutentiight 😂😂😂
Good video. Thanks.
my car smells like mouse. i dont think they got into the air pipes, just built a nest in the intake.
Yes, add fresh coffee flour to floor. And keep flour there about 4 monhs.
I love your videos,..and your accent. Where are you from man??
Hello. Thank you. From FIN
Good video but seems you are putting back the dirt into the engine bay area .. couldn't you have cleaned it away from the engine?
Great point!
sir gud day. water leaks problem at driver side. any solutions or video you can recommend??
Thanks for comment 👍
Será bruto el tipo, tiró toda la basura dentro del área que el filtro estaba protegiendo
Hi and Thanks for your comment. :-)
This guy called you a dumas for getting all the debris into the intake area.
De que año es el Toyota con cual el esta bregando
YA..UMMM WHY not vacuum or spray out the bits? Why not spray lysol into the vents to murder off the nasties?
Noted 👍
Very good ASMR video.
Glad you think so!
Does this car have a cabin air filter? Or not?
Yes
Can you please show me how to open the cover under the evaporator cooling system of Toyota Corolla 1997. Thank you...
Hi, I will do video in future.
does the toyota 91 carolla have a cabin filter? thanks
No
hello, a question. toyota corolla 2002 where is the heater control valve?
Thank you
Slow and steady
Other gr8 video Peter thx
Thank You for comment. :-)
even vampires need clean air.
Hi Sir and Thank You for feedback. :-)
i wish their was a way we could make a cabin air filter fit in these old cars i have a 93 sierra and it has no cabin filter.
Whak! Whak! Whak! w/ 🔨"That's why I careful"...lol
Thanks for comment. :-)
Thanks for sharing 👈😅
Welcome 😊
Meron akong probemo ganitong model 1994 .saan nakalagay aircon cabin filter..pumspasok kasi baho ng usok galing sa labas
Ok
Walang cabin air filter ang 94 na corollq
Can't you just use a dust buster and not rmove all the screws and plate and wipers?
Julie Soule Thanks for info.
I tried a dust buster (actually a shop vac) yesterday, and nothing came out
Thanks a lot :) I have to do this on vw polo and I couldnt find any information earlier. Is it possible to do this without taking off a bonet ?
MAybe, please try.
isn't there a filter in the intake to clean?
yes, in cabin area
if its a 1998 no.
Behind glove box
Cabin fileter is in the glove compartment
What year is the car from the video
2000
Thanks Peter.../.
Good comment, 😀
Thank you
Julie Soule Thank You very much for comment.
Thank you
5:08 little bit SMALL HAMMERING ? it is too hard
Ok
Very slow
Thank You for comment. Best Regard Peter Finn
C'mon brother, you need to speed it up. 10 minutes before you removed the cover.
Yes and Thanks :-)
Facts 👍🏼