Video není dostupné.
Omlouváme se.
2022+ Hyundai Elantra N Sxth Element Intercooler Installation
Vložit
- čas přidán 24. 03. 2024
- In this video, I show how to install a Sxth Element intercooler on a 2022+ Hyundai Elantra N.
Sxth Element Intercooler Kit
sxthelement.co...
Tools Needed:
Ratchet
Ratchet Extension
8mm, 10mm Socket
Plastic Panel/Trim Removal Tool
Flat Head Screwdriver
WD-40 Lubricant
Floor Jack or Lift
Optional Tools:
Electric Ratchet
Joint Socket Adapter
12mm Socket
Philips Head Screwdriver
Drill with Socket Adapter
General Tools
Trim Removal Tool Set - amzn.to/3k9pG00
Craftsman Tool Set - amzn.to/3ixW4sD
Craftsman Screwdriver Set - amzn.to/3CGJf69
Magnetic Multi-bit Ratcheting Screwdriver - amzn.to/3qmjt3J
Long Nose Plier Set - amzn.to/3VWZ67j
Long Reach Pliers 3 Piece Set - amzn.to/3IOq0L7
12pc Flex Head Ratcheting Wrench Set - amzn.to/3C4FZRg
Amazon Basics Ratcheting Combination Wrench Set - amzn.to/3OUibHk
Cordless Ratchet Wrench Set with Extended Head - amzn.to/3otVLSQ
Cordless Electric Ratchet Wrench - amzn.to/3WEnP2c
Ryobi Cordless Combo Drill/Driver Kit - amzn.to/43wgEg8
Ryobi Extended 3/8" Cordless Ratchet - amzn.to/4cs7o0t
Tools for Wheels
RYOBI ONE+ 18V Cordless 1/2 in. Impact Wrench - amzn.to/3S8pmgl
1/2" Wheel Socket Set - 15/17/19/21/22mm - amzn.to/3on5rOS
1/2-inch Torque Wrench 10-150 ft./lb. - amzn.to/3WqcW44
Low-Profile Jack 1.5 Ton (3,000 lbs.) - amzn.to/3WoBWZs
For any vinyl products used in this video, please contact Grape Ape Ink Decals at grapeapeink@yahoo.com or you can visit our shop on Etsy Grape Ape Ink Decals at www.etsy.com/s.... My wife and I own this shop
Disclaimer:
This is not a paid promotion.
This Channel is a participant in the Amazon Services LLC Associates Program. An affiliate advertising program is designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com.
Music Apple iMovie - Flashbulb by Hapasan
Feel free to comment or email me at nprform@gmail.com
Please like, share, and subscribe for more content! Thank you
#sxth #sxthelement #elantra #elantran #nperformance #hyundai #intercooler
Great videos as always. Do you have one on changing the front blinker bulb?
Funny you mention that. I almost put something about that in the video. I found when taking off the front bumper, you have easy access to change the bulbs without removing the headlights.
Great Job! Thank you for the video 👍
Thank you!
I installed STXH intercooler on my Corolla GR. On stock tune it doesnt heat soak as bad and pulls a bit harder. Nice upgrade .. When we first installed, we had boost leaks from not tightening the clamps enough. But we pressure tested and fould all the boost leaks and now it great. Make sure you check for leaks, you can hear them in full boost.
Thank you for the heads up! I plan to recheck all the camps after a 100 miles of driving. I definitely notice the car pulling harder. The temp is also lower than it was with the stock intercooler.
Awesome as usual 😊
Thank you!!!
great video as always!! very informative and helpful! now how does the intercooler upgrade sit on the warranty side of things? void?
Like any modification, it can void your warranty that applies to your car’s engine. It all depends on the dealership and potential issues you might encounter.
I didn’t see it in the video so I’m assuming the stock bottom shroud didn’t fit back on after installing the intercooler 😢
@@jayrockfromdablock2940 Correct, the plastic shroud in front of the factory intercooler does not go back on. If you want some type of shroud, I would suggest a Forge intercooler if their i30N intercooler would fit. Also N75 has a new intercooler coming out. Both have shrouds built in, if that is a concern you have. I just got a Forge intercooler for my wife’s Veloster N and it has shroud pieces built in and it’s very nice.
Excellent coverage on this install and the layout of the OEM parts. Random question but if you still have the stock cold side silicone pipe, is there anyway you could tell me the thickness (4mm, 5mm, 6mm)? I'm selecting silicone adapters for my methanol project. Figured you may have the stock hose and calipers lol.
Thank you! I do have the factory hose. It looks to be 5mm.
@@nprform amazing, thank you!
@@BecauseHYDE16 you’re welcome!
Nice instructions man! How long did it take totally?
@@rawtaa8591 I don’t know an exact time, due to all the filming I have to do, but it’s not a long install at all. Honestly, it’s one of the easier upgrades I’ve done. Getting the bumper off is no big deal, I’ve done it many times at this point. The main thing is getting the clamps positioned in a way you can tighten them down easily and tightly. I had the cold side pop off a couple of times after I first installed it and had to reposition the clamp so I could make it tighter. The clamp i had issue with was the one that connects to the top of the cold pipe in the driver’s side.
@nprform nice thanks man I saw your veloster n install to. Which I'm planning to do in the future. I have near nil experience, so I 'll probably need all day. haha
@@rawtaa8591 I’m no mechanic and between my wife and I we’ve accomplished a lot on both our cars all by ourselves. You can do it!
Hi, the interior creaks?
@@londonsir1324 Yes, I do have a couple of creaks from the plastic interior.
How did you accomplish that color on the front N badge on the grill?
My wife made it for me. She has a vinyl store on Etsy Grape Ape Ink Decals.
Nice cereal box toy car 😂