Video není dostupné.
Omlouváme se.
REMOVING AND DISMOUNTING STUCK SEMI TIRES! JUST NEED A LITTLE PERSUASION!
Vložit
- čas přidán 20. 11. 2020
- I NEED TO REMOVE AND DISMOUNT THE WRONG SIZE TIRES FROM A TRUCK. I WANT TO SEND THE WHEELS TO BE SANDBLASTED AND PAINTED. I HAVE THE CORRECT SIZE WHEELS/TIRES ON ANOTHER CHASSIS BUT THEY ARE RUSTED STUCK! UNFORTUNATELY, ONE OF THE TIRES ENDED UP BEING JUNK AND ISNT USABLE. CHECK OUT THE WHEELS! VERY NICE!
I needed a set of tires I found on the internet for a fire truck we have for our Breast Cancer Non-profit. They were 2 states away, and I told the gentleman I would be close to him on vacation about a month later . He held them... we made arrangements to come by and get them, and I drove 4 hours oneway in the rain from a hurricane. I REALLY needed the tires he had because of their size, he didn't have to go out of his way to hold them but he did. He even had offers on the tires before I got them, but he kept his word. I drove on roads that were closed because of standing water and had to reroute but I got there. Not only did he knock off a third of the price for what they were needed for, but because I kept my end of the deal. He was so good to me I had him do some work on my pickup while I was there, it pays to keep ones word and respect others.
Lovely story.
Nice to hear of the times when good honest folk cross paths.
You're obviously a man of integrity, that came through by the bucket load when you drove the timber right the way across the country to Leo for the Tally Ho rebuild and took another load back the other way. Good things come to good folk like you. Keep up the great work you're doing, very kind regards from the UK 👍
@@bungfupanda8936 Thanks for the kind words. I do my best!
Mr. JC. My dad always taught me A man's word is all he's got. Thanks for the video
i dont have much..i do have my name and my word. that is more valuable to me than any truck i have ever owned.
👍👍
At the end of the day that’s all you’ve really got is your word other things come and go.
@@j.c.smithprojects mate what do you do with the trucks you find that are good to repair ?
Those wheels looked like hard work.
Cheers Jason
I agree but it's hard to hear his words.
Ha,
That was priceless, after you busted your butt with those wheels on the parts truck, hauled 'em to your work area with the Gradall, and magically, they turned into aluminum!
Very cool you have the power of the Gradall, Milwaukee impact, and the BFH at your disposal. My back hurts just watching you do this. Work safe, stay warm.
Doug@ the "ranch"
turning steel into aluminum is a very specialized talent....very few can pull it off. my sandblaster is the best!
Yeah I remember my father telling me your word is only as good as your name so always keep your word show up on time when you say you're going to be there you be there. But now you're talkin about a man that was born in the 18 hundreds even though it was 1898 still those values were taught to those people and they taught them to their people I was born late in his life so he taught me everything he could and always told me never be afraid to ask questions never be afraid to say you're wrong and always be willing to learn. I'm glad you brought up the fact that people in this world today just don't care I don't know how many times I have been shined on when people say they were going to do something or be there and never were well guess what I never dealt with those people again. I have really been liking your videos trying to keep up with old but mostly new especially that dynahoe swap interesting. Thanks for bringing me along stay safe StayWell and as always God bless.
i dont have much but i do have my name and my word.....the most valuable things you can have.
Thank you so much for the reply, I read people pretty good usually but lately it's hard to tell. You know people have changed so much since the world is changing, unfortunately I guess that's the way it's going to be so it'll be time for me to tighten my belt to. I know you know what I mean anyway you take care of yourself and keep doing what you do. Stay safe stay well and as always God bless.
A day in the life of JC and his Misses is always worth watching and learning 😆 I’m a U.K. lorry driver with some mechanical knowledge. I find your channel really interesting. Cheers Stevie 😎🏴
I get extremely irritable when people waste my time like that. but like you said it needed to be done anyway and you got your workout for the day.
The impact gun is impressive. However, I think you need to order the Milwaukee 18 volt sledge hammer forthwith! LOL!
agreed.
I junk cars for a living and I tell people when I leave and I tell them I’m on the way and they message back and tell me ok and then when I’m almost there I get a message saying we sold it to someone else so I feel your pain people’s word does mean absolutely NOTHING and it’s happened to me multiple times when I tell someone I am going to be somewhere I make sure I am there especially since I run my own personal business
Same here . some customers i refuse To answer phone for anymore
Dylan_05z71 Same here, as a tow truck operator, people call in I’m stuck or broke down......send out truck and driver and no one there...some will call back and cancel as the truck is within 2 miles away.....disgusting bs...
@@kygambler22 you got same life style as me . im a owner operator
I've never heard of a 10R22.5 i had to look it up. Appears to be used on school busses allot. Thanks for the video.
Got me on news wheels 😂😂. Mind your back with that hammer !!. Stay safe and healthy 🇬🇧
You're so right regarding courtesy etc.
JC sure got me on those wheels. I was absolutely amazed at "how well they turned out. And in chrome to boot !" Got me !
I paused video to comment, I agree with you about peoples lack of courtesy etc. Gone are the days of where a mans word is his honour. I am old school in that sense and like you if I say I will be there then I will be there.It's not hard and to me it's just common courtesy. So many business's have no honour at all. Sad to see hey. Cheers,Rob
You had me with the wheel thing. I was going to ask where they do such great work? LOL. Another good video, thanks.
A man's word is supposed to be his bond, if you commit to something it's just that - a commitment... Thanks for the laugh at the end, simple gag but made me smile more than it ought to have done!
Not like the years gone by, a hand shake was has good as cold hard cash it was that simple a man's word was everything.
You had me going there at the end. Didn't even realize they weren't 5 hand hold wheels. At first I thought they blasted clean, then no, you had them chromed. When I saw your reflection that gave it away. Nice!
Respect is earned. Your videos do justice to hard work and self worth, keep on keeping on!
I was impressed bloody hell what an amazing job, how did he get them that clean, was always told that I was somewhat gullible Mr Smith .😂
Honesty and a man’s word is all you used to have, now it means nothing. Sad world we live in. Take care Mr and Mrs JC
I hear your pain about basic courtesy that seems gone forever. I am in a complete different business but experiences same behavior with many people. Love your videos about hard work and good spirit you put into it
I really Envy you having a companion that's there to support and encourage you!!
1 man's junk is another man's gold
When we do our semi tires, we mix dish soap with water in a jug and spread it around the bead, makes it easier to get them off with the bars
did you see me use soap?
Excellent video keep up the good work 👍👍👍👍
When they are really stuck,you may need to put a low profile jack between the frame and rim. (Make sure that the pump on the jack is pointed down.
Couldn’t agree more with you about the accountability of people these days. I’ve been blown off, lied to, and mislead so many times buying things that I almost don’t trust anyone anymore or have faith in anyone. It’s a shame that’s the way things are now
A man's Word is his HONOR> If you can not keep your word do give IT !
Hey, just a little tip if you have a stuck wheel like that, get you a jack (bottle jack) in between the wheel and frame and use it to apply some pressure gradually. It will usually pop the wheel right loose.
Best Channel on CZcams. Keep up the awesome work and be SAFE out there. GOD BLESS 🇺🇸
Hood's Towing Service
Nashville, Tennessee
those are the best chrome painted wheels I have ever seen. lol that was a good one JC
Hey JC ,thanks for sharing your adventures! 🤗. Bob
I like that wheel joke ,that was good 👍 👌. People don't have consideration for others .
Wow 4 tyres removed in 2 minutes, pretty good going JC lol
it sure looks fast when the video is at 4 times normal speed!
Amen. I don’t understand why people say they will do something if they have alternate plans. If you know you have multiple options you are considering, that’s fine, just be man enough to say it. I can work with honest people. It’s ultimately frustrating to bust your butt to help someone when they don’t keep their word. No one needs to tell y’all that you’re great people, I enjoy all your content and appreciate the work you and wife do.
100%agree, the problem is we now live in a world full of disrespectful, self centered people Mr jc. And it hurts to live in amongst people who just don't care anymore when you live by "our" standards. I drive city buses and see it day in, day out. All the best 🏴
I liked the wheel bit at the end! 🤣 Good one J.C! I'm the same way, I message people when I leave and again when I'm close. Selling on FB or Craigslist is a *joke* anymore. People have no decency. Just one simple call could spare a major headache!
a little humor makes the day go a little easier. a little respect for our fellow man would go a long way in making the world a better place.
Hello my friend. I enjoy your videos. I did haul the Amish from homles
Tire man JC kick Butt Hard working man Love it.😀😃😄😁😆
Been there too when they just wont get of good work 👍👍
Breaking down those tires made me flash back to my younger days....lol ...I couldn’t do it now or wanted too....lol
Three important things in life...your family, your faith and your word !
J.C your back and arms must be in good shape. I also it happen to me when I am going to go buy something from someone I get there and they tell me "oh we just sold it" I own my own pc repair business and I also work on Mountain bikes. Pisses me off you ask them if it will be there when you get there in 25 min. They say yes but yet when I get there it had been sold. Like what the .... As always J.C great video
A penny saved is a penny earned. Love the video
swing away Billy! for those who don't know that quote is from that movie called signs
Learned a new trick - putting the tire sledge in the center hole to flip it over
much easier on the back for sure.
Those new wheels are gorgeous. You make this look easy I've need to change a rear on my riding mower tomorrow it fights me the whole time.
i would rather do 10 of these than one mower tire! i put a piece of all-thread in a vice and bolt the mower wheel down tight....helps me from chasing it all over the shop!
@@j.c.smithprojects Thanks
@@j.c.smithprojects i have the harbor freight small tire changer. I put 4 new tires om my ridding mower this spring took maby 2 hours to remove and reinstall all 4 well worth the money for it. With out it would have been a half days work chasing them around the shop floor.
you got me there I thought that was a hell of a sandblasting paint job
A man’s word should mean something! I learned that from my dad...born in 1911. I tell people, “I say what I mean, and I mean what I say” and that is it. I also believe in the “Gentleman’s agreement.” I guess some people live by a different code. I was beginning to wonder if that PB Blaster was ever gonna work. Did the heat from the fire get back to the wheels and that’s what caused them to get stuck? Hehehe. They did an amazing job on those wheels...You forgot to snap your fingers before they appeared. Hehehehe! Those look so nice. The next question is...Did he ever show up?
another great video, thanks for letting us tag along
Good manners, self respect and honoring ones word are definitely in short supply and getting scarcer.
I'm like you when I give my word that I'm going to do something I mean what I say and say what I mean and you are right there is no respect any more keep up the good video s I don't always get to give you a thumbs up because I watch you on my TV so you guys owes get a thumbs up from me
Nice video J.C. I find that being beguiled in business takes the goodness out of doing good business.
haha, I thought holy, great paint job!
Thanks for the memories, Watching you break down those tires. I worked for trucking company and that was part of my job. We used charcoal lighter fluid. It worked both ways, as a lubricant and when sealing the bead ( with a bit of flame). Either was outlawed in our shop. HA HA. Great video, Keep them coming.
When wheels are stuck like that put the pry bar in the hand holes and pry against the brake drum works almost every time till they get loose
Your absolutely correct people have no common courtesy, and common sense has gone by the wayside!
With your fabricating skills, you could build a giant truck-tire-sized 'gear puller' for those stuck tires.
Yep, just did pretty much the same thing....taking P195/60R15 wheels off a Nissan Cube. Yep, it was quite a battle. :-)
a little pb blaster usually helps get those wheels off.
I sprayed them with pb blaster before i started.
I love your videos and your ethics, it’s very nice to see! I know you’re a busy man but you might have some odds and ends part I would be interested in, I was just wondering if there was any way to reach you? Thank you sir and god bless!
LoL... Painted...
I hate doing truck tires.. Felt the pain...
i dont mind doing tires some times. its a break from some of the more technical things.
I have the same snap on pry bar love it. Its my go to pry bar!!
wow that's a awesome cordless impact makes my Dewalt looks sick...ha ha ha ..did you ever try P.B.Blaster? that stuff is pretty good, if that don't work, then bring out the fire. opops now i seen the blaster, guess i should watch all the video before commenting ha ha ha i use to work for a trucking co. and did alot of tires back in the day, the ones i hated were the split rim tires, they killed a lot of people back years ago. the best time i ever had dismounting old tires and mounting new tubeless tires was 2 hours, that was for 8 tires on drive axles , could have been faster but had a slow air compressor . that was start to finish, removing tires off the truck, till the last nut tightened ha ha ha and yes soap is your friend
I tried everything in this video, I even drove around with the wheel nuts loose, no joy for me. My final solution was to buy four new tires and let the tire place deal with them.
No buddy can here you talking man 😎😎😎😁
I need to send you a kentool hook bar it makes taking the inner duals of alot easier sir.
16 year tire man approved lol
never seen one.
Ken tool 34652 should look like a hook bar they call it a bead tool
You can reach through the hand holes and pry against brake drum and work rim off
Hey J.C. ...just a lil hint here...spray the hubs with penetrating oil when the wheels are stuck..might need to do it a few times..as the rim moves forward the rim picks it up..it helps . I see you use the mid length tire bars...i have the 52 inch ken tool bars...i know they are heavier...but they are more user persuasive with stiff sidewalls..and long enough to eliminate the need to carry out another prybar...im not telling you how to do what you do..just sharing what i do..please take it as constructive
i used pb blaster on the wheels....wonder how hard it would have been if i didnt! these were the longest bars i could find when i bought them.
looks like they are the same ends as the ones i have. not sure how long mine are. cant remember.
Those 1st 4 you pulled seemed like off a school bus. Could even be used on ups delivery wagon or bread wagon.
You probably could have driven around for a year with no lug nuts and those wheels would still have stayed on. Damn rust.
There are still good people out there with old school values. Just few and far between.
I give no one credit for cash and wait for no one.
I had six of those no-shows in a row. One said through his office,
yes there are parts for about ten projects there, plus some you don't even know of yet.
You can never have to big a prybar! You are a tire changing machine,!
Hey I have a question how do you take off a tight tire the rim. Like I use that technique slide in the bar and let gravity do the job. But this one is super tight. How can I take it off
I like what you do, if we ever need anything customized I will contact you
I was just about ready to ask what type of paint you used on those wheels. You got me on that one.
Hello my friend. What part of Ohio do you live in?I was from New Philadelphia Ohio. But I love in South Carolina now
I think I would have had a few kind words for that fellow...
Try a bottle jack between the tire and frame!
People told they wanted FREE stuff from my Winnebago kitchen that I posted on market place. Set the time to meet at Walmart and not one of them showed up. Is that a 3/4 Milwaukee?
i was using the 1/2" that day. i do have a 3/4" as well.
Totally agree a mans word not what it once was at all
Can you Built a stud pilot rim onto a hub centric truck
Hey J.C. I know it's a shot in the dark but by chance do you ever come across any hub centering or stud centering steel super singles? Looking for a pair of each for a for a scrap hauling pup trailer and a converter dolly i have.
nope. all the super singles i have are aluminum.
Ok thanks J.C. I kinda know im looking for a needle in a haystack.
some things need more persuasion than others
Time is money
You like like you've done a set of tires or two 😂
maybe more than once.
@@j.c.smithprojects that made me laugh
I’m new Do u have a website where u sell the stuff from the trucks u don’t want or where u have trucks forsale I’m always looking for trucks
Basic good manners and simple courtesy have largely disappeared from normal personal behaviour today. It all seems to be about an attitude of me, me, me and stuff anyone else and the younger the generation, in general, the worse it is.
One more dumb question from your Brazilian viewer. Don’t you damage the tires when hitting them with the sledge hammer? And a last one: When was the last time you removed a wheel without power tools? 🤣🤣
Prybar? They're called hand holes for a reason! :) I'm outta' breath just watchin' ya! I thought you sold the 'gator?
gator?
@@j.c.smithprojects Navigator Or was it an Expedition? I forget.
We always tapped the rim. The tire is tacking up all of the shock. That is quit the pry bar where can I get one like that.
i dont want to damage the wheel. so i hit the tire. pry bar is from snap-on part # PBH54R. 54" tall.
@@j.c.smithprojects Thanks
Well with tires like that I guess you don't need a gym membership
people are like that all over too lazy to even call and say i late or can't make today cash in hand then i do the job or get the parts
How much for the homemade wrecker truck without the wrecker body
i dont sell trucks on youtube.
@@j.c.smithprojects Where do you post trucks and parts for sale?
Do they make a puller to pull stuck wheels off? It'd be easy enough to make one.
not sure....i always seem to get them off......eventually.
Yes they do but one can be made for a lot less
👍😎✌️
Common sense is gone too. No ill regard for other people.
those tires like mine they had a 'good year' but it wasn't 2020
Please get a microphone you have a lot of good info that i cant hear sometimes , great channel anyway
having camera troubles yet again. they just dont hold up in this environment. i may have to stop making videos until i get new cameras again.
Haha I need your rim guys number so I can get mine done.