How to Fix Meta Oculus Quest 2 Controller Drift problem when other methods failed

In this video I will show you how to fix Meta Quest (aka Oculus Quest) controller drift problem when all other repair methods failed to work.
affiliated links:
Paint Brush Set
amzn.to/3RbKJLd
Rubbing Alcohol
amzn.to/3NI8SX1
Screwdriver Set
amzn.to/3NOIg6Q
CRC Mass Air Flow Sensor Cleaner
amzn.to/3NHjDsk
WD-40 Specialist Electrical Contact Cleaner Spray
amzn.to/3nC5aU8

[@JahGamiing]

OMG Thank you so much this helped alot i dont got drift anymore i thought it was because of the hole i got in my controller but it was just the thumbstick you just earned a new sub

[@si3n]

how did bro get a hole in it ☠☠☠☠

[@Rat-09]

You dropped this, 👑, king.

[@xPenguinrr]

This actually helped

[@TCubanMafia]

well i use WD-40 Specialist Contact Cleaner Spray and fix my problem

[@edgeofpluto]

i owe you my life

[@PotRacer]

This does not help, the reason of it glitching is not dirt, it's bent contacts.
And if you want to get alcohol to flush everywhere, just get a 10ml syringe and flush the hell out of the stick area through every gap.
Like you do, it does nothing.
Die it several times because I also thought I was smart, until I rebuild the mechanics of the joystick itself and made it working again for a looong time

[@ghost0_092]

It won’t break it right

[@vitalv2824]

​​​@@ghost0_092 No, but give it a good amount of time to dry, not less than 30 min. To be safe.
It'll just waste your time. Also do not use too much contact cleaner, just about 5ml or less.

[@beaglebango9191]

Im pretty sure this made my vr controller work less.