Video není dostupné.
Omlouváme se.
How to fix a spinning shower handle on American Standard barrel-type shower valves (Re-Nu series)
Vložit
- čas přidán 8. 03. 2022
- Video about how to fix a shower handle that won't stop spinning on an American Standard barrel-style shower valve. The fix was made by adding a plastic shim washer to the valve stem in addition to the brass washer that comes with the stem assembly. The thickness or number of washers that you may need may vary; in my case I used a washer that was a bit under 1/16 inch thick.
For further reading regarding this topic, see here:
www.plbg.com/forum/read.php?1,334333
Btw, I tried searching for the brass washer online and couldn't find anywhere that you could buy it. I don't think I was even able to find a part number for it when I looked about a year ago. The tupperware fix seems to work fine though as it has been a year since I did it and the problem has not returned.
Thank you I have the exact plumbing! So very helpful in my repair. This is the only video I have found on American standard barrel DYII.
Wow! Thank you very very much. The guy at the store could not tell me what to do. He had never seen that type before, and I certainly would not have figured it out. So. You Rock buddy. Saved me time and money, and frustation. Ps. Made it out of plastic also.
Thank I’m having the same problem with the cold water handle on my sink. I’m going to try this fix today. My original had a thick washer between the barrel and valve stem. The re-nu replacement just had a thin brass washer
I’m having leak on the head shower from this stem I replaced with the new one and still the same , does this kind of shower body has seat inside or how to fix this problem.?