Coleman CT200-UEX Mini Bike Fork Upgrade
Vložit
- čas přidán 27. 08. 2024
- In todays video we upgrade the stock Coleman mini bike forks to make them 2x the stiffness. We added a 1in spacer and SAE 30w oil.
Parts Used On This Build
Predator 301cc - bit.ly/2Ecf0c4
301cc Stage 2 Kit - bit.ly/2S89ZnY
28mm Flat Slide Mikuni - bit.ly/2Y7xqlo
Muffler - amzn.to/375jmgV
21x7-8 Tires - amzn.to/3qIy0CN
Cr80 Foot Pegs - amzn.to/36w8Ygc
40 Series CVT Pulleys - bit.ly/3h2GC1z
40 Series 2000 RPM Springs - bit.ly/2VrkciL
Harley Peanut Gas Tank - amzn.to/36i1y1M
Medium Weight Rollers - bit.ly/312ms2o
40 Series 2600 RPM Kit - bit.ly/3kPFDEd
40 Series Reverse Wound Spring - bit.ly/3avQ2R1
420 Chain - bit.ly/2qHyOgB
Engine Plate - bit.ly/32a6zUM
5/8” Jack Shaft - bit.ly/301ed6a
Jack Shaft Bearings - bit.ly/2WikDuc
Jack Shaft Sprocket - bit.ly/3h1r9iw
Mini Bike Brake Kit - bit.ly/2rcvF8N
CR80 Foot Pegs - amzn.to/36w8Ygc
Catch Can - bit.ly/2QHbucO
Catch Can Filter - amzn.to/325mze0
Kill Switch - bit.ly/2DPEFHK
Twist Throttle - bit.ly/32RxC9x
Tube Dimple Die Set - bit.ly/2KaYhZw
Tube Knock Out Set - bit.ly/3a1O3Wk
Pipe Dimple Die Set - bit.ly/3gEWl7y
14Pc Hydraulic Driver Set - bit.ly/3qMgHQZ
Merch & Events - bit.ly/33YbmtO
Check Out Go Power Sports for all your Go kart needs! bit.ly/2viX9vP
Parts & Tools used on the channel - amazon.com/shop/redbeardsgarage
Quantum Welding Table - bit.ly/2HVk8jl
Prime Weld Tig 225x - bit.ly/2EbSIqK
Prime Weld MIG180- bit.ly/2Q44l5V
Tube Buddy Affiliate- www.Tubebuddy....
1740 Beard Balm - bit.ly/32L1eVS save 15% with RBG15
Benchmark Abrasives (cut-off wheels, flap discs..) bit.ly/2SENg4f save 10% REDBEARD10
Help support us on Patreon - patreon.com/redbeardsgarage
Want to donate without the commitment? - paypal.me/redbeardsgarage
Want to send us something?
Red Beard's Garage
P.O. Box 572
Sweetwater, TN 37874
Facebook - redbeardsgarage
Instagram - redbeardsgarage
Pinterest - redbeardsgarage
Twitter - redbeardsgarage
Instrumentals by Chuki Beats - / chukibeats
-------------------------------------------------------------------------------------------------------------
*********Disclaimer*********
Please do not try to re-enact or recreate anything you see in these videos. We are trained professionals. Red Beards Garage does not take any responsibility for injury's created by doing so.
#RBGKarts #RedBeardsGarage
I did this upgrade today and it’s so much better. Feels great in the woods now with no mushy feeling. It was super simple to do. Thank you for the video!!
Really cool bike now. It needs a wide, dirt bike style rear fender, even just for looks.
The spring controls compression and rebound. The oil viscosity, and valving, controls how fast it moves.
Rule of thumb remove fork spring fully compress fork Add oil to approximately 110 mm from the top that should give you the volume of oil😉
If you raise the oil level it stiffens the forks as well due to having less air in them.
And if you have to much oil and you compress the forks to much you blow you seals😁
@@skinnycains4448 Well don't put that much in... ;)
Mmm never taught of that so if you change the grades of the oil you can make adjustments to the ride, great stuff Red 👍🏾👍🏾
I was thinking he was going slow. I like that you caught that as well and gave the reason.
If I had all of those tools, I would bend up my own custom design mini bike frame with proper suspension and sized for a big man and a big block. Like a trail master but at 110% upscale.
Love the QVC ladder fails💗💗💗💗💗🤕
Glad to see the CT200u-ex and its upgrades getting finished. I just posted mine. I'm doing the swing arm also. Still working on it tho.
Thank you RB for doing a fork tuning video. I have been wanting to do this to my MB200 for awhile now seeing as I'm a heavier rider like yourself. I assume the MB200 forks are the same or a similar process, I just want a professional opinion. Can you confirm this? Also wanted to address your tire situation. I had the same experience with those tires being a square shape and not wanting to corner I recommend the Duro Red Eagle it's what I have on mine now and they are fantastic. I started out not knowing anything about mini's or small engines and now have modded my whole bike using your videos. Keep putting out great stuff you are appreciated more than you know. Thank you!
Great call out Lanny I was thinking of the extra oil on the spring 👍🏾👍🏾👍🏾
God bless you as well Brother, love what you guys do! Keep up the great work.
Definitely need to do this on my newly picked up ct200uex. Got it for a killer deal with a stage 1 predator but def needs a little tlc. The exhaust on this bike sounds great!
Was thinking about doing this on my MB200-2. Forks are pretty soft compared to upgraded rear shocks.
I’ve been patiently waiting on this video. I have the same bike and the front end is soft. Thanks for this video. Keep up the good work y’all!
Looks like a mad max mini bike 👌🏼
I know I don't run very well when being choked either. The more you know. LoL
😑😑😑😑😑
Leave the forks on if you have to put longer spacers in. Just take the top Plug out.
You normally can measure spring od, wire diameter, and length to come up with a spring from another bike using used springs from ebay for example
only thing i did on my set up was pop off hex cap. cut a short piece of pex pipe to stiffen the spring. it worked
Just got a wild deal on a coleman ct200-style frame (not sure on the actual brand) with a billet internal Honda GX390. Lots of nuts and bolts to tighten up and clean, but for $500 I couldn’t be more excited to get into the minibike world lol
Can’t find the follow up video? Did you abandon the project? Best looking bike I’ve seen you build yet. Great job.
I have been using Klotz fork oil since the 70’s. That’s what you want.
lol 😂 love the laundry intermission
We sell funnels that’s you can measure your fluid with at the Autozone I work at brother! Hopefully that may help ya sometime in the future it also has a shut off valve at the bottom so you can measure what ya need then open her up and put it out also has a screen and a cap on it.
Thanks for the info.I can use 1.
Great video. Shock mods are awesome,and simple!
Tighten rear spring to make it less springy
Good job…nice ⚙️⚙️
Awesome modification !!!!
I peed a little laughing at ladder nerd!
Hey red beard, how’s it going? Big dog love the channel always can’t wait for you guys to put new content out had a question I was wondering if you and your fellas can do another Coleman build step-by-step because I’m trying to build my own but I don’t know what I’m doing And I don’t have welding equipment just a lot of sockets and wrenches please help and thanks for all the kick ass content
I see the spacer length is just over an inch. What is the diameter?
Also wondering this
I want you to build me or demonstrate how make a rear suspension swing arm for a Baja Warrior with the jack shaft pivot point!
thats weird because i have the front suspension add on kit for my ct200u and the shocks are really stiff, like i kinda wanna soften them up a bit
but the forks on my mb200 are really soft so i think i might try this on that
I have the same bike built with mikuni, exhaust and cam. Still can’t get that 196 to wind out like a 212 hemi.
Governer delete and new valve springs with a bullet flywheel will get it goin
I have a similar Harbor Freight stand that I bought for my BT200X, and have the same issues.
I want that exact mini bike set up
Man u have some great builds.. love ur vids. Do you build for customers? Love to have this done to my ct200uex..
I need to buy one of these and have you guys "RBG" it. :)
Did Lonnie's shirt come from your merch store? I gotta get me one of them
Easiest way to do this it remove the handlebars an leave the fork tubes in the tripletrees. Less likely to crossthread
Maybe add air Schraders to caps give you a quick way to adjust for rider weight. Rear looks like it could use some tweeking . Great show love the banter between two of you .
I don't live far from you guys It would be cool to go on a ride sometime.
We do meet ups. Make sure to follow us on social media to see when and where
The oil weight controls how fast or slow it rebounds. Along with the spring.
Sup love the channel
I was thinking the same thing for mime but I didn't know if it would work
Great channel always very helpful. Do you remember what size slick tires are wheels used on little red?
I NEED THAT GASTANK
I wonder if he reads the comments
i have a question. remember the tao tao arrow would a 250cc motor from like an rps hawk with a reverse box work out or should you just get a 420cc predator with a cvt
You’d be better off with a zs190 since they sit horizontal and make more power
Can you at 1:46 what size spacer, washer axle and nut you used please? I’m install the same thing. Tires are 19x7-8
I don’t think there is any valving in those forks.
Are the Trailmaster MB200-2 forks the same?
Yess
How about a Baja warrior
Holy crap how long is that spring 😳
Very nice
Can I use barns 4wd 28 000kg static load heim
I need to shim the GPS forks on my thunderbird, they compress almost two inches when I sit. The swing arm I added only about a half inch if that, super scary when your two or three feet in the air and the back is higher than the front.
Which steel u use to make spindle
Will the front forks fit a bt200x?!?!
Thought Lontreazy was just being a conservative rider cuz he a family man now 😄
Does Lonny know that he's your test monkey?
...like the one that was sent into outer space...😂
The spring mfg send a piece of plastic pipe for the preload adj. Saying you want to be softer material than spring. Basically the opposite of hardened steel wrist pin
Not trying to be an ass great channel thx
Your videos are great except for the changes being made during tuning its very hard to tell the difference..or maybe lonnie isnt hoonin as hard as he can..a gps for comparison would be great
What kind of fuel tank are you using? We want tanks!
Have you painted it yet? Would love to see the finished bike.
RBG, I need some help, my valve guide fell while I was trying to put on new valve springs, HOW DO I GET IT BACK UP!???!
Speed run ?
Um can I get that bike that was at the end of his ride
Hey Ted Beard where is the best place to get a cross bar for the handle bars on my mb200-2 mini bike?
You gonna race it at the 180 race this year?
Will this work on my mega moto pro front forks, can they be adjusted
Work out video with motor bike shocks, make massive biceps in 1 day! Gar-un-teed. Did I see a mustache-a in your boy?
Ole Red Beard is the MF’ING man! Are you a self taught mechanic Greg?
Hi any new videos
How fast is that mimi with all the mods
Hey man
I order the front fork suspension in gopowersport for my ct200u
Come to find out I can’t use original front wheel on the suspension. They only have 145/70x6 tire and it LOOK TOO TINY COMPARE to the rear wheel and tire. Do you guys know where I could find a front wheel that fit nice on the gopowersport suspension?
Love this bike. Any updates? Want to sell it? 😆
Hi rbg ! Where can I get that gas tank ?
I got a 212cc with a 10 tooth clutch What sprocket & chain should it order
Whatever chain fits the clutch sprocket you have?!
How about a short video on the rear swing arm on this little bike?
My go kart will hit 60 wide open with same build.
Dollar tree measuring cup.
hey.... its ryan again, that is the swing arm i want you to send me
So why are you blocking so many comments from public view? Are you that afraid?
What kind of dip do you guys use
Do you have an instagram or something we can talk or can you just answer my question right now
My question is in part one and two in this playlist which mini bike would you recommend and what is the top speed on it
Segundo en llegar
100th comment
Yo red beard , can you make a video on how to build the same thing you see life and kicking me every which way but up all of my transportation need to find the cheapest way to get transportation so I can keep this job, but if you can’t, are you willing to sell that Coleman you please let me know , and I love the show with you guys always go hard when it comes to the bikes and go cart. I love it keep it up big dog.🫵🏾💪🏾💪🏾👍🏾💯