How to Make Simple Natural Fork Slingshot | No Power Tools
Vložit
- čas přidán 24. 07. 2024
- In this video I show you how to make a simple natural fork slingshot without any power tools. It's easy and fast to make and anyone can do it.
- Krátké a kreslené filmy
Really good Hudson!!
Get rid of the rubber pad, and use an old beach towel or a blanket!!
Presto! No more bounce backs!!
Nice slingshot and nice shots. Don't forget to wear protective glasses when testing them. And set up a collector like Zacary Flow's. Segurança em primeiro lugar.
Nice looking sling shot...
Nice Natural. Yeah I've found that just hanging a large blanket behind the targets and letting it hang loosely from something (not dragging on the ground or being held down) will stop the Ammo without it bouncing off everywhere. I've also ended up putting another big blanket underneath the targets and the hanging blanket so that I can see my Ammo easier than having to search through the grass for them all the time. 👍
Awesome thanks, Ill try it.
From where you my bro?
Please tell me your country name, and how I can contact you on WhatsApp , because I have some questions about hunting.
I am also very fond of hunting.
Thank YOU... I thank Grandpa used to fold the band then tie it off so it has padding against the top of said Sling. LOVE IT
Where that rubber mat is hanging some old t-shirts up instead as backing or an old bed sheet as that’s how I do it and it works really really well as it absorbs the impact of the steel’s and just drops to the floor so you could also put like some box underneath the t-shirts then the ammo hits the t-shirt then it will fall and collect into the box or container. Great shooting, wish I was that good lol.
Love watching your slingshot videos.
Nice naty fork brother
Nice build man!
If there is every a season for hunting spoons you are going to bag your limit 😮 or if you are attacked by silverware, you will smoke them.
😂
Aqui en México 🇲🇽 También las hacemos de madera Y de Alambre forradas muy bonitas!!un amigo tenia una de cuerno de Venado 😮
Very good tutorial.
Very nice handle.👍👍👍
Awesome video, thank you man
Watching from malaysia
hi, well done Hudson, nice job 👍👍🙂
Very nice...super glue as a finish is perfect..gives is a plastic finish..nothing can penetrate it.
I see your vídeos.!!! Very good.!!! Divulgando sempre.!!! Like com CERTEZA.!!! 👏👏👏👍👍👍🎣🎣🇧🇷. Brasil.!!!!
Amen
Cool 👍🍺
Hey good Job Bro!For No more loosing Amo You can easy build a Big Catchbox simply Out of a Cardboart and old T Shirts or Towel!!!There are hunderts of how To discriptions here ON You tube!!!Have fun and keep shooting!!! Greetings from Germany Javor😉👍
@@abf91 thanks dude, I’ve made a few catch boxes and it’s a game changer, thanks for the support 👍
@@hudsonhertz 😉
I dont know if you have a hobby lobby or Joanns fabric there, but you can find cargo mesh netting there. thats what I have in my catch barrel. I dont get any rebounds with the netting. beautiful natty, ive got some that are drying right now.
Awesome, thanks for the suggestion. I’ll check it out 👍
I love you videos not bad at all young man...
I watch a guy named Fowler's makery and mischief he's got to shut up where you take some ties a sheet running back for the background stop the ricochet and one on bottom of that to catch his ammo give it a try dude it works...
The shot at 4.10 and tbe little giggle had me pissing the amount of times i have had stiff like that alll you can do is laugh 😂😂 loving all ur vids bro keep it up please donr stop like most ppl 😂👌💯
Litraly i have learned to make decent nattys just from watching you your stuff thankyou honestly appreciate it bro 💯👌
I made it thx
Awesome!! Where do you get the rubber band straps, how are they attached and what's the pouch made of?
I buy all of my supplies from Snipersling online, I’ve got a shorts video showing how to attach them, good luck!
♥️💯♥️
Use dirt bullets
Or make a bigger net to catch. Like those used to stop arrows like a courtain
Try a beach towel or two hanging. The towels will absorb the energy and not bounce as bad.
Hello My friend,
It's really nice to see a young person interested in woodwork and using handtools.
Just think, if you're interested enough, you can make anything you want to.
Just think, when people want cupboards, chairs, etc, they go to their local store. You could make your own, and they'll be unique to you. No one else's chairs, cupboards will be like yours. You could use whatever design or joints you choose.
I'm not particularly academic, though I love woodwork and making things too. I fly fish and tie all my own flies. I needed a cupboard/stack unit for my belongings. So, I designed and made my own. With that, I chose my own materials and design, and it's totally unique to me.
I shoot, too, and have made my own gunstocks. Many gunstocks are now made by lazer guided machinery, in ultra quick time.
Mine are both hand-made in my kitchen of my small house. They are laminated, each laminate taking two hours to hand saw. One stock has five laminates, the other has seven. The shooters and people I've shown them to said I should be proud of myself. I'm not very academic, though I love woodwork and making things.
The only problem is that I make things for myself and my family, as people won't pay for my time in that capacity when they can buy something similar, made in China for peanuts.
I hope I've inspired you, my friend, going forward in your young life.
Time goes very quickly.
Best wishes, Ian, England.
Wow man thanks for the comment, that’s very inspiring, I’ve never thought of it that way. My grandpa makes chairs and I might have to take a few lessons from him and make my own, thanks!
@hudsonhertz
Hello My friend,
You're very welcome. I didn't have that opportunity. My father, although a keen shooter, wouldn't let me own my own air rifle or allow me my own hand tools. I know you're not a child, but children then were seen and not heard.
I was twenty-three when I bought my house, and within twelve months, I'd made my own bedroom floor to ceiling wardrobes at one side of the chimney alcove.
My life could have been very different if my early years were different and encouraged me to do what I loved. My father thought I would cut my hands on saws, chisels, etc.
Sometimes, someone only needs a little push, and their outlook alters, and they see things they hadn't before.
The best of luck, my friend, and I'm thrilled with your comment.
Ps. Always try and keep your tools sharp, and they'll always look after you!
In terms of health and safety, always keep your hand, fingers, and arms behind your cutting edge. Learning how to sharpen your tools is a skill in itself but often overlooked. Sometimes, you'll think you haven't time to sharpen your chisel, though it'll take much longer to cut a joint out with not being sharp. Sharp tools are fantastic.
Lastly, measure twice, cut once!
Best wishes, my friend, and good luck!
@@ianwoods1384 Thanks for the tips and comment! Have a nice day!
@@hudsonhertz
You too, my friend. Good luck!
Your a natural, 👍
You either want to construct a large cube with a 45° angled back and an open front with lip at the bottom basically a giant airgun pellet trap idea being that the shot hits the 45° slant and is angled down in to the bottom of the box.
Or you want two poles a distance apart with a line between on two eye bolts with a heavy duty outdoor fabric curtain double over the line to absorb the shots energy,.you can also have an open top enclosure at the bottom to catch the ammo.
Sorry if this is a dumb question, but whats the purpose of the linseed oil onto the frame? Is it just to make it look glowy?
Never a dumb question, I’m pretty sure it’s just to seal the wood a little and protect it. It also helps with giving it some color and making the gain of the wood stand out.
@@hudsonhertz 🤙
I made one welding steel bars together to form a "slingshot body" and attached a rubber exercise band (30 kg band) I also made a forearm rest because at full drag it would just bend back. The shit hit my lower thumb knuckle and crushed it shooting steel ball bearing balls.
I know how you feel 😂
where do u get bands for slingshot?
I get my bands from Snipersling
Hello again, my friend,
When I messaged you yesterday, I had only watched half of your video.
With reference to catching your ammo, you could do with making a wooden frame, to hang a heavy old curtain, to kill the energy in your ammo and stop the richocets.
When your ammo richocets, you are in the lap of the gods as to where it lands and what you hit and potentially damage.
If that was me, I definitely wouldn't be popular with the neighbours.
I would be very careful with that and try to hang a heavy curtain as soon as possible. You will also catch your ammo, so you won't have to buy more!
Best wishes, my friend.
Thanks for the idea, I’ve upgraded it since that video with a few pieces of rubber and a carpet, no ricochets and it catches my ammo, thanks for the comment!
Can you make one with tube rubber
Get a safety net for archery
nice.what kind of wood is it
Guava
This is amazing, how long you dried it?You have my sub
@@StephanusDeStephanis I only dried it for a few months because it wasn’t the thickest tree fork. The tree was also pretty much dead when I cut it down.
how did you tie the rubber band to the fork? Is it the same material? Can I use the same?
I want to create some, But I've got tons of doubts about that.
What kind of slingshot band do you use?
I mainly use Snipersling
Do they ship worldwide?
@@tomt8915 Yep 👍
What kind of bangrives are they
Just made the band grooves with a circular file
Hayang modol
Please start making catch and cook videos not only making natural fork videos
Please
Depends if its allowed to hunt and what species in his region. And i think hes underage. But i would also like to see catch and cook
Put your backshield in a 45 angle behind, then it will just go down to the ground.
balls diameter mm.? tires are mm×mm.?
You can make me a slingshot
Hola cómo está
Sorry, safety first.
You is noulepp
You are mention and pagal