I've been doing this line of work for 16 years and it's amazes me that how badass this job actually is. I've been doing top notch custom installs customized rims and such. And when the install is done the transformation from stock to upgrade is amazing. It's kinda like doing art but on cars. Fucking love doing this shit and I get paid damn good money to do it
That's funny cause it's exactly how I explain painting cars makes me feel. I could never draw and sucked at art in general, but I can smash out an amazing paint job.
Very good, this is going to help a bunch for me to start using my tire changing equipment. I justed didn't want to damage any on my nice rims and understanding the instructions with the tire changer aren't anywhere close to the benefit of watching your video. Thanks a bunch!
Very good! Your tutorial is exactly what i was looking for: how to put the tyres on ALLOY rim! And as you used all the parts provided by the machine, you're video become one of the best :) Thx man
As someone who used to do 120-180 tires a day, you really don't need the assist arm, use your knuckles on the tire and push down and follow the machine, the stiffer the tire the more weight you have to put on it. The heavier and stronger you are the better. Other then that pretty good video, but change the machine to a centered arm one even at a good pace this is really slow.
Thanks. I havent touched a tire machine since 2018, starting my first day at tire kingdom tomorrow. Needed a little refresh video so i dont look like an idiot on my first day
Dennis Buckmeir the assistant arm is a life saver. I also just got a hunter tire machine with the bead press system which is really nice. Thanks for watching!
Great job on your tutorial. It's been 30 years since I used a near identical machine in Phoenix Arizona at Cobre Tire. My uncle's brother has a little tire shop here in the boonies of West Virginia, still uses a bubble balancer and plugs flats of mag wheels. (I cringe) They have some cheap versions of this machine on the internet that would drag my uncle's brother into the 21st century. I would love to help him buy one, along with the machine balancer, just to relive some old times. But I think he plans to retire in the near future.
I just want to say you're videos are great 👍. Not to be a stickler but the thing u take out of the valve stem is called a Schrader. So when you say you have to take the valve stem out or off ppl will totally get confused. Luckily I just know this from heating n air conditioning and tires themselves but yes the special tool is a Schrader valve remover. So anyone that's confused the actual stem stays put. It's a little thing inside the stem
I work in a tire shop in a store that requires you to have a membership to shop there and sells goods and wholesale prices (wont say just in case....but i think we all know which store i am talking about) . One of the beauties of our machines is instead of having the traditional duck it has a hydraulic hook that can grab and set the bead for you, makes installing run flats and low profiles much easier. Thanks for the video, instead of paying a shop to install my new tires on my new mags i will just do it myself with the knowledge i already have, plus knowing how the manual machines work is even better!
Hey mate, I just bought a pair of new wheels i plan on getting ceramic coated. Should I get the rims ceramic coated before or after I put tyres on. Will the tyre process scratch off the coat or damage my rims ?
My question is I have a 1952 caravan and the gap where the tyres goes in is extremely tight and I've ordered 6.00 x 16'' tyres instead of the 6.50 x 16'' that was on the van. When having the new tyres fitted to the steel rims can I have no air in the tyres n tubes, fit the tyres to the van and then add the air to set the tyre against the rim.
:Doing a simulation of the whole process in vr as my thesis. So the set screw at the top that you had set at ~7:06 is to set the radius of the arm so it won't come any closer to the center of the rim right? But you theoretically could push the arm further away from the rim right?
Firewalker124 yes you are correct. You are still able to move it back to the right. I do a lot with VR in my class using the VR program “Wrench”. Your project sounds amazing and I have a few questions about it. Would you be willing to talk via email or phone? If you look me up on Twitter “MrAdkinsAuto” you can see my VR setup.
Thanks for the video. I'm trying to figure out how all of my new rims got damaged. The tire shop won't do anything to fix it other than offer to put touch up paint on my rims.
To avoid this make sure you take them to a nice place with a clean workshop like you see in this video and one who specialises in selling alloy wheels etc. And some shops have expensive touchless tyre changers.
It’s called “rubeglide”. NAPA carries it along with most other automotive part stores. Basically it’s soapy water but dries with very little residue. Thanks for watching!
Do you think 12 gallons tank can inflate flat 21 inch tire and get it on the rim after tire change ? If i just prefill air tank with any compressor and run cheapest tire changer machine from 8 bar air tank
Damm I just started working at a shop and sometimes I change tires. We only pop the bead once on the face and twice on the back. U went a good 20 times on the back lol. Is that really necessary?
You only have to break the bead in one spot and then throw it up in the table. Just simply pushing down on the sidewall will easily break it the rest of the way. That way you don’t have to spend so much time in the shovel
Mr Atkins is that a coach tire machine you're using I'm about to start a job with Firestone and it got coach machines it's similar to the one you have it just doesn't have the roller or the duck head is I wish it did that would be great but anyway I learned a lot by watching your video all right thanks stay safe have a good day
Thanks for your help and keep up keep sending the good videos I learned a lot by watching your videos this way I don't damage anybody's rims because I'm a maintenance tech at Firestone I learned a lot by watching your stuff thanks you have a good day talk to you soon
3:46 was that metal on alloy on the outside rim😱 I'm sooooo paranoid about my tyres getting changed because I'm OCD with my alloys. Other then that. Very informative👌
absolute zero if they put a rag under the bar it will keep it from scratching the rim. Also, they make a plastic sleeve to go over the bar if you are really concerned. Thank for watching!!
I don't remember but I believe it came off of an older Mazda 5 (2005 maybe?). Was a students car and they bent the rim. We use it for measuring rim runout. Sorry
A lot of different companies make them but they are all pretty much the same. Lower cost ones have a table top like the one in this video. More expensive ones have a center post the rim mounts to and also might uses rollers to assist in breaking the bead, etc.
Assalamu Alaikum how are you brother brother I am also a mechanic like you I work in tire shop like you I have last seven years of experience can you tell me which mechanic is needed in your shop I am a Bangladeshi citizen I am 20 years old my name is Mohammad Arif Hossain
You should train the oafs at Halfords in the UK. They damaged all four alloy wheels in the faces. They blamed a poor previous refurb. Maybe they should have stopped after the first was damaged 😤 To top it off they are refusing to pay for the repairs. Only half cost of two wheels 😤 All this and they have no touch machines!
at 3.48 the knock on the alloy to the machine, that freaked me out. Then worse still at 9.01 when he drops the metal bar onto the alloy, that's just a massive NO NO. Some people look after their cars and wheels and this is NOT how to treat someone's wheels. Take pics of your wheels ALWAYS BEFORE they get done, so you can prove they've caused any type of damage or scratch to them. This is a great video in showing you HOW damage can be caused to your wheels but you just DID NOT KNOW where it occurred!! Now you know!! Listen, it is not an easy job and you need to use a bit of effort however, care people's wheels, they are coming to PAY for damage when you see issues at the timestamps I've shown! I have a local tyre place to me in London and I only let one guy at my Rims as he's been there for 20 years and he's class, everyone goes there because he's well experienced and cares for people's cars and wheels!!
You watched the whole video to find two times he MIGHT have caused the absolute tiniest mark on the wheel. 1000% guarantee setting the pry bar on the wheel didn't scratch the wheel. Clown.
This video explains why rims always come back dinged up at the edges after I get my tires changed. Slamming that big metal arm against the rim while breaking the bead like that.
I use Hunter Engineering and love their machines. Their website has links to your local sales rep. This machine was about $6,000-7,000 but cheaper options are available for closer to $3,000. The service rep then has to come out and assemble it.
GOOD JOB you must need a good eye if a customer gives you those spray on chrome rims like i just got ripped off for by WHEEL SMART LLC Houston, TX United States of America my 2017F150
When installing a tire some say inside some say outside and some dont say nothing . The tire has the dot date in one side and the other side has the dot number but not the date on tires like that how can i determine witch side is front or backwards
I will admit some tires are directional, but they usually have an arrow. As for the DOT/date tag, owners preference. I had idiots insist tire had to have DOT tag mounted to the inside, or outside. It probably looks better out of site. A guy I worked for bought a big lot of tires at a very cheap price, the DOT number showed tires were 10 years old.
Shows how to not damage alloy rims... and yet he slams the duck head down onto it multiple times and drops the lever onto it. He also lets the lever come off the “ducks head” & drop onto the rim when it’s rotating. None of these were necessary to the process, & ironically all of these practices cause damage to the lip of an alloy rim. Otherwise not too bad, but if those were my new shiny rims I’d be pissed.
Thank you for the feedback. The video is intended for my students practicing on rims in class so I can understand the confusion of others watching them. My tire machine mounting head (duck head) has a plastic piece inside it so that the metal mounting head does not actually contact the rim. It's not hitting the rim as bad as it sounds and then the locking lever actually lifts the mounting head up off the rim. As far as the lever goes, when we do a nice rim for real (not class practice), I have a plastic sleeve that does over the bar does the metal does not hit the rim. The problem is they wear out really fast. Great observations and thanks for the comment!
I like the low profile low profile tires The tire didn't look very tight to the rim looks like the Tyler Lever fell right in you didn't have to push it at all Good tutorial Shame about the b******* that it was a tight fitting tire
I've been doing this line of work for 16 years and it's amazes me that how badass this job actually is. I've been doing top notch custom installs customized rims and such. And when the install is done the transformation from stock to upgrade is amazing. It's kinda like doing art but on cars. Fucking love doing this shit and I get paid damn good money to do it
LANGUAGE,!!!!
@@steelman86 GRAMMAR!!!!!
That's funny cause it's exactly how I explain painting cars makes me feel. I could never draw and sucked at art in general, but I can smash out an amazing paint job.
Very good, this is going to help a bunch for me to start using my tire changing equipment. I justed didn't want to damage any on my nice rims and understanding the instructions with the tire changer aren't anywhere close to the benefit of watching your video. Thanks a bunch!
Very good! Your tutorial is exactly what i was looking for: how to put the tyres on ALLOY rim! And as you used all the parts provided by the machine, you're video become one of the best :) Thx man
elmandracula thanks for the feedback!
As someone who used to do 120-180 tires a day, you really don't need the assist arm, use your knuckles on the tire and push down and follow the machine, the stiffer the tire the more weight you have to put on it. The heavier and stronger you are the better. Other then that pretty good video, but change the machine to a centered arm one even at a good pace this is really slow.
It's a tutorial knobhead
Very well explained and shot. Thanks, mate!
Thanks, you make it look so easy, can't wait for my machine to arrive
Mine just did, great timing, new Sub
Thanks. I havent touched a tire machine since 2018, starting my first day at tire kingdom tomorrow. Needed a little refresh video so i dont look like an idiot on my first day
Nice video, awesome machine. Thank you!!!
Video explains a lot of the techniques I need to practice. I need to order assist arm and roller for my tire changer. Thank You.
Dennis Buckmeir the assistant arm is a life saver. I also just got a hunter tire machine with the bead press system which is really nice. Thanks for watching!
Thanks a lot lol, starting work at tire shop. God, thank god we got CZcams 😂
Nice, man. I also start at Japanese Classics tomorrow, worried but hoping to work my way up.
@@Hunter-si5bg good luck 🤙🏻
Great video, informative and good quality video!
Good video, facts and tips, good to know! Thanks!
Great job on your tutorial.
It's been 30 years since I used a near identical machine in Phoenix Arizona at Cobre Tire.
My uncle's brother has a little tire shop here in the boonies of West Virginia, still uses a bubble balancer and plugs flats of mag wheels. (I cringe)
They have some cheap versions of this machine on the internet that would drag my uncle's brother into the 21st century. I would love to help him buy one, along with the machine balancer, just to relive some old times.
But I think he plans to retire in the near future.
I just want to say you're videos are great 👍. Not to be a stickler but the thing u take out of the valve stem is called a Schrader. So when you say you have to take the valve stem out or off ppl will totally get confused. Luckily I just know this from heating n air conditioning and tires themselves but yes the special tool is a Schrader valve remover. So anyone that's confused the actual stem stays put. It's a little thing inside the stem
I work in a tire shop in a store that requires you to have a membership to shop there and sells goods and wholesale prices (wont say just in case....but i think we all know which store i am talking about) . One of the beauties of our machines is instead of having the traditional duck it has a hydraulic hook that can grab and set the bead for you, makes installing run flats and low profiles much easier. Thanks for the video, instead of paying a shop to install my new tires on my new mags i will just do it myself with the knowledge i already have, plus knowing how the manual machines work is even better!
Hey mate, I just bought a pair of new wheels i plan on getting ceramic coated. Should I get the rims ceramic coated before or after I put tyres on. Will the tyre process scratch off the coat or damage my rims ?
good work and great explanation on each step
My question is I have a 1952 caravan and the gap where the tyres goes in is extremely tight and I've ordered 6.00 x 16'' tyres instead of the 6.50 x 16'' that was on the van.
When having the new tyres fitted to the steel rims can I have no air in the tyres n tubes, fit the tyres to the van and then add the air to set the tyre against the rim.
Thank you, excellent work.
wow it's very great video, thanks
great video
:Doing a simulation of the whole process in vr as my thesis. So the set screw at the top that you had set at ~7:06 is to set the radius of the arm so it won't come any closer to the center of the rim right? But you theoretically could push the arm further away from the rim right?
Firewalker124 yes you are correct. You are still able to move it back to the right. I do a lot with VR in my class using the VR program “Wrench”. Your project sounds amazing and I have a few questions about it. Would you be willing to talk via email or phone? If you look me up on Twitter “MrAdkinsAuto” you can see my VR setup.
Thanks for the video. I'm trying to figure out how all of my new rims got damaged. The tire shop won't do anything to fix it other than offer to put touch up paint on my rims.
To avoid this make sure you take them to a nice place with a clean workshop like you see in this video and one who specialises in selling alloy wheels etc. And some shops have expensive touchless tyre changers.
Bradley so did you sue the shop?
Great video
Thanks for this video.
what do you have in the black box you lubricate the tire with?
It’s called “rubeglide”. NAPA carries it along with most other automotive part stores. Basically it’s soapy water but dries with very little residue. Thanks for watching!
Do you think 12 gallons tank can inflate flat 21 inch tire and get it on the rim after tire change ?
If i just prefill air tank with any compressor and run cheapest tire changer machine from 8 bar air tank
You make it all look so easy! 😂
It is easy
Nice video.
Damm I just started working at a shop and sometimes I change tires. We only pop the bead once on the face and twice on the back. U went a good 20 times on the back lol. Is that really necessary?
Hello mrAdkinsAuto excellent work I admire and respect as a great teacher you... tell me please which model is the tire Remover?
Hunter TCX550
You only have to break the bead in one spot and then throw it up in the table. Just simply pushing down on the sidewall will easily break it the rest of the way. That way you don’t have to spend so much time in the shovel
Where did u get the wheel from that push down on tire to keep tire under the duck head
Thanks for sharing 🙏
Very good instructional video - thanks for sharing!
looking for air/ water seprater
Mr Atkins is that a coach tire machine you're using I'm about to start a job with Firestone and it got coach machines it's similar to the one you have it just doesn't have the roller or the duck head is I wish it did that would be great but anyway I learned a lot by watching your video all right thanks stay safe have a good day
Center post?
Thanks for your help and keep up keep sending the good videos I learned a lot by watching your videos this way I don't damage anybody's rims because I'm a maintenance tech at Firestone I learned a lot by watching your stuff thanks you have a good day talk to you soon
What make and model is that tire machine?
Do you have a video how to dismount and mount a tire manually?
Protege X no but I have watched a ton on CZcams. One of these days I will give it a try.
where can i buy this machine, and how much does it cost? i'm planning to put up a
auto servicing shop. thank you so much.
Its a HunterTCX550. I think it was about $6,500 but you can pick up cheaper machines from other companies. The quality just isn't as nice.
hello ,we are car tyre machine supplier in china ,add my whatsapp or wechat 180 1239 1636 we can chat about it
Top vid 👌
3:46 was that metal on alloy on the outside rim😱 I'm sooooo paranoid about my tyres getting changed because I'm OCD with my alloys. Other then that. Very informative👌
absolute zero if they put a rag under the bar it will keep it from scratching the rim. Also, they make a plastic sleeve to go over the bar if you are really concerned. Thank for watching!!
@@MrAdkinsAuto can a wheel get cracked by locking it down from the inside of the barrel opposed to you locking the outer edge?
Thank you...شكرا
Great video!
What brand is that rim on the ground if you don't mind me asking?
I don't remember but I believe it came off of an older Mazda 5 (2005 maybe?). Was a students car and they bent the rim. We use it for measuring rim runout. Sorry
how many brand of tire machines are out there? I seen a different type in an auto class.
A lot of different companies make them but they are all pretty much the same. Lower cost ones have a table top like the one in this video. More expensive ones have a center post the rim mounts to and also might uses rollers to assist in breaking the bead, etc.
If ya used one, they are all pretty much the same... The pedals may change but other than that it's all the same
wanted to learn this craft. I want a selection from you. Is it good? Thank you
Yes it is! Good luck to you!!
Is there better than them advise me
thanks man
Nice 👍
How much this unit?
Where can I get a duckhead roller for my machine?
Amazon
Thank's.
Who is this guy? Why not let a real tire tech show HIM how to use this machine
Assalamu Alaikum how are you brother brother I am also a mechanic like you I work in tire shop like you I have last seven years of experience can you tell me which mechanic is needed in your shop I am a Bangladeshi citizen I am 20 years old my name is Mohammad Arif Hossain
Some tires are also directional
You mentioned breaking the bead in the 12 and 6 o clock position but what is the reference point to know where that is?
Think of the valve stem as 3 or 9 o'clock. You are avoiding the bead breaking lever making contact with valve stem.
46 dislikes are tire shops that just got busted for scratching peoples rims, lol, some thought it was curb scuffs damaging their rims
3:46, 7:22, 8:46, 9:35, 11:20 are times when this guy probably scratched or dinged the wheel, lol so this shop scratches wheels too i bet.
I been knew the shops were doing the damages.
thankyou
muy bueno el video, pero hay q utilizar guantes pa hacer el procedimiento
What brand of machine?
Hunter. I really like it
@8:36 the metal bar touches the rim. Won’t this scratch it?
No because he sticks the crowbar under the duck instead of under the rim so it doesn’t get scratched
How much sir machine vulcanaize
Did you see dude smack the wheel with the tire iron? Lol nope not letting this guy touch nice wheels
Great teaching video but to many advertisements
Tyres are hard to do I just keep doing it until I get better
You should train the oafs at Halfords in the UK. They damaged all four alloy wheels in the faces. They blamed a poor previous refurb. Maybe they should have stopped after the first was damaged 😤
To top it off they are refusing to pay for the repairs. Only half cost of two wheels 😤
All this and they have no touch machines!
at 3.48 the knock on the alloy to the machine, that freaked me out. Then worse still at 9.01 when he drops the metal bar onto the alloy, that's just a massive NO NO. Some people look after their cars and wheels and this is NOT how to treat someone's wheels.
Take pics of your wheels ALWAYS BEFORE they get done, so you can prove they've caused any type of damage or scratch to them.
This is a great video in showing you HOW damage can be caused to your wheels but you just DID NOT KNOW where it occurred!! Now you know!!
Listen, it is not an easy job and you need to use a bit of effort however, care people's wheels, they are coming to PAY for damage when you see issues at the timestamps I've shown!
I have a local tyre place to me in London and I only let one guy at my Rims as he's been there for 20 years and he's class, everyone goes there because he's well experienced and cares for people's cars and wheels!!
I agree, but those alloys already looked in terrible neglected condition.
You watched the whole video to find two times he MIGHT have caused the absolute tiniest mark on the wheel. 1000% guarantee setting the pry bar on the wheel didn't scratch the wheel. Clown.
This video explains why rims always come back dinged up at the edges after I get my tires changed. Slamming that big metal arm against the rim while breaking the bead like that.
That's why you go to a an alloy garage after you dummy
@@crashcandiboot3529 Not sure what that sentence means, but ok...
Why are you hitting the bead 50 times....just move the tire and hit another spot...
What about the ducks neck ? It’s making contact
How much this tire machine..i have plan to buy..and how to order plsss..
I use Hunter Engineering and love their machines. Their website has links to your local sales rep. This machine was about $6,000-7,000 but cheaper options are available for closer to $3,000. The service rep then has to come out and assemble it.
Tire changer machine IS good. Problems all them balancer. STRESS FULL.. (NEED NUMBER . SIZE)
I find the sport tires to be really difficult, they piss me off
GOOD JOB you must need a good eye if a customer gives you those spray on chrome rims like i just got ripped off for by WHEEL SMART LLC Houston, TX United States of America my 2017F150
اوكي
When installing a tire some say inside some say outside and some dont say nothing . The tire has the dot date in one side and the other side has the dot number but not the date on tires like that how can i determine witch side is front or backwards
I will admit some tires are directional, but they usually have an arrow. As for the DOT/date tag, owners preference. I had idiots insist tire had to have DOT tag mounted to the inside, or outside. It probably looks better out of site.
A guy I worked for bought a big lot of tires at a very cheap price, the DOT number showed tires were 10 years old.
And I can put new tyres. Without damaging the tyres
I love doing this job. When ever I strip an old tyre. My guys just take my rim and put new tyres for me.
then he hits the clamp
Use this machine if you want to damage your rims and tyre.
I like pros.
Shows how to not damage alloy rims... and yet he slams the duck head down onto it multiple times and drops the lever onto it. He also lets the lever come off the “ducks head” & drop onto the rim when it’s rotating. None of these were necessary to the process, & ironically all of these practices cause damage to the lip of an alloy rim. Otherwise not too bad, but if those were my new shiny rims I’d be pissed.
Thank you for the feedback. The video is intended for my students practicing on rims in class so I can understand the confusion of others watching them. My tire machine mounting head (duck head) has a plastic piece inside it so that the metal mounting head does not actually contact the rim. It's not hitting the rim as bad as it sounds and then the locking lever actually lifts the mounting head up off the rim. As far as the lever goes, when we do a nice rim for real (not class practice), I have a plastic sleeve that does over the bar does the metal does not hit the rim. The problem is they wear out really fast. Great observations and thanks for the comment!
I like the low profile low profile tires The tire didn't look very tight to the rim looks like the Tyler Lever fell right in you didn't have to push it at all Good tutorial Shame about the b******* that it was a tight fitting tire
Holy fuck I felt myself get stupider
really.
Xmas
Carlos Salinas see bende
Apa masi ada
NEVER BREAK BY THE VALVE THIS IS A NO NO.ITS CALLED A VALVE CORE NOT A VALVE STEM. HOPE YOUR FINGER HEALS SOON.
Or you could just man handle it and use your muscles like I have done for years...;)
UCN Conversions I’ve done it too but it’s a treat when you can just use a machine work smarter not harder
If that were a brand new rim you would have destroyed it
I’ve had to shops gouge the F*CK out of my rims. I’m not sure how they did it but it ruins my life and I want blood.
Smh
you will never work for me you take too long busting the rim
5 minutes to break the bead , I would’ve been fired by now 🙄🙄🙄
Clearly hes doing it at a slower pace as a tutorial for new comers
He's shooting a video. Also, tires stick wheels sometimes, especially on the back bead. If you're not aware of this, you haven't done enough tires
Makes a 5 minute video into 15.
Your tire mounting and dismounting video sucks
this guy just tried the same side like 5 time smh 2:52
Very well explained and shot. Thanks, mate!