How to Test the Relay in Franklin Electric Control Boxes
Vložit
- čas přidán 4. 03. 2019
- Chris quickly shows you how to test the relay that comes in Franklin Electric control boxes .33 to 15 HP.
Subscribe & “Ring the Bell”: bit.ly/2CpXSsv
Have a question or need help selecting equipment?
Live chat with us on our website: www.rcworst.com
Call our experts: 855.329.4519
Email: Customer.Service@RCWorst.com
----------------------------------------------------------------------------------------
Our Social Media
Facebook: / rcworst
Instagram: / rcworstcompany
Twitter: / rcworst
LinkedIn: / r-c--worst-&-co--inc-
----------------------------------------------------------------------------------------
We are a distributor of pumps, packaged pumping systems, on-site wastewater treatment equipment, on-site wastewater treatment systems, and custom electrical control panels for water and wastewater applications, water well supplies, drilling supplies, and water treatment equipment.
Here's an idea, why don't show an example of a bad relay along with the good one.
So some one will know what to look for in a bad one also.
I have to tell you guys, hands down you have the best channel on these "well" subjects. Thank you for sharing your knowledge.
Thanks!! That's what we strive for!
Thank you for the help. I bought a new one and compared the test and was put at ease to know it was that vs finding a deeper problem like the actual pump.
Way to go! Happy we could help
I experienced an interesting problem with the control relay on a 3/4 HP submersible pump. A 1 year old pump started blowing the recommended 10 amp fuses every few weeks. Pin 5-2 measured 4.75 ohms. Run current draw measured with a Fluke clamp on meter was on spec and line voltage was correct though I did not measure transient voltage at start up. Changed the capacitor, no improvement. Installed 15 amp fuses and problem went away for a few months. Installed 20 amp fuses for a test only and they opened. Replaced the controller and returned to recommended fuses. No failures 4 years and counting.
got 49 m ohms on CAP and B, trying to find a replacement now. thanks for the video! really!
Having the same problem. Did this work?
thank you thank you very well explained
Glad it was helpful!
If I am getting a .3 reading on that last test between B and L1. Would that indicate replacement?
Hi there.... I got 9.8 ohms on a 1.5hp box. And it did not read k ohms on the meter. Any thoughts? Thanks!
In this vid, you show a 4.5 to 7.0 for a 230 reading for a 230 V system. My relay is a 27 year old GE 3ARR3. My reading shows 3.73 that after a dozen tries. I just going to buy a new relay but from your vid it seems like I should be getting the 4.5 - 7.0. The GE relay is identical at least with the 5-2-1 poles with the white one you show beside the Franklin control panel. I don't know if you read the comments but enjoy your videos.
I have the same relay with the same result. Did you replace yours?
A quick comment about a previous video you made on testing a start capacitor. What you didn't mention is that even though the ohm check is good that doesn't mean the capacitor is good. My ohm test was fine until I did a mfd check. This is on a 27-year-old 230 VAC shallow well red jacket submersible pump with a start capacitor 64-77 mfd. The mfd test was a failure with the meter jumping around a bit but not even reaching 10 mfd eventually just going back to one. The control box also has a second York 10 mfd in which both the ohms and μF checks out fine. But I have a question about your another vid, so will post another comment. By the way, I have watched almost all of your vids, some several times, and I have learned a lot. I feel like I'm a quasi electrician now.
Hi I have a problem with my water pump it keeps on tripping ,its a pressure kind of water pump how can I go a bout it
Somebody find the easy button from Staples... That was easy! Served up with RC Worst’s Signature Awesome Sauce! What’s next on the agenda for your videos?
Chlorine disinfection, PSA on local codes, followed by an exciting series we are putting together with the owner of SumpAlarm.
Could you please provide a video explaining the internal schematic of the relay for 5 HP controller (305213961) and how it works? I am learning about my controller. Thanks
Hola amigo, como funciona el QD RELAY En conjunto con el capacitor, en las bombas sumergibles, en Español. Por favor, me rs muy imteresante rl tema, gracias por la atencion brindada. Saludos desde mexico.
We had a 1 hp and our relay isn’t passing the test, so I’m shopping for another one, but finding it difficult to find only the relay (blue). So can we use any other size relay or if I get a new control box, do I definitely need to get another 1 hp, or is it interchangeable for a different hp size?
We can sell one to you, give us a call: 855.329.4519
water pump stopped working. Did the test and on Cap and terminal B it goes to 15.05 and then bottoms out at 13.0. Does that mean the relay is bad. In the video it says you shouldn't get anything. Thanks so much
Hi. Could I connect a bomb without relay? How can i do it?
Do you have a suggestion of where I can purchase the larger relay
Give our tech line a call: 855.329.4519
Podrías agregar subtitulos en español ya que algunos celulares no tienen esa conversión inglés-español por favor saludos cordiales bendiciones!!! Desde Monterrey NL México
what about the test of the pin cap and the pin L1.?
Thanks, & nice shirt! (Wearing almost the same one as I watch) no water but at least I can laugh
Glad you enjoyed!
I have a big black relay that also has a #4 and 6 in it and it is testing 11.5 between 5 and 2 is the relay bad?
Give us a call with the control box part # and we can help: 855.329.4519
Please note. The relays are potential start relays. They should be replaced with the correct drop in and drop out voltage! The pump motor builds up back EMF which causes the relay to take the start capacitor out of the circuit. Please advise everyone to replace the relays with the correct drop in and drop out voltage. It's just not a simple relay!
Thank you. His videos are very good but a quick explanation like you just did would be great.
Sir it is if the relay 5 and 1 have a resistance
couid you share the relay diagram?
Where can I buy it?
Do the start relays have some type of liquid in them mine appears to be leaking at the cap wire connection
It may have leaked down from the capacitor. Your probably need to replace the whole box
Sir what happen if telay coil #5 have a contact to relay #1
Where can I get a replacement relay for p/n 223415905 1/3HP 115V?
That part # is not popping up for me. Can you give us a call? 855.329.4519
Is it normally open relay showing 0 cero right
Hello sir, what is the value of the starting and running capacitor for 3hp goulds submersible pump? Thank you sir
208-250mfd Start | 45mfd Run
@@RCworstwater thank you sir
Can relay work intermittently?
Yes
Hi i have a pump its turn and turn on i replaced capacitor but i have still problem the old cap was empty but it was 86-103 uf 220 vac please let me know what should i do
Give us a call: 855.329.4519
I will relay this to my tech friends yes lol
I need how to fix it bc my water stopped working but I need to know how to get it working bc rn it’s making a high pitch eeee noise
Please give us a call for help troubleshooting: 855.329.4519
So did you find out what was causing your non start? Was it the capacitor instead
My relay just keeps short cycling very very fast.