Flysky G7P with FS-R7P Bind and BVD setup
Vložit
- čas přidán 27. 04. 2022
- Welcome back to Wtf Rc Cars,
Flysky G7P with FS-R7P Bind and BVD setup
More info can be found at Flysky
www.flysky-cn.com/g7pdescription
FlySky FS-G7P 2.4GHz 7CH ANT Protocol Radio Transmitter PWM/PPM/i-BUS/S.BUS Output with FS-R7P £56.37
www.banggood.com/custlink/mD3...
For RCModelz link use discount code rcmz for 5% off most of the link prices.
Servos
THETA RAZOR T1 NFC £105.63
www.banggood.com/custlink/DG3...
Ludicrous L8849 brushless servo £85
www.passionrc.co.uk/online-st...
Power HD TR-4 Mini 7.4V 2.6KG Waterproof Metal Gear Servo for TRX4 £18.19
www.banggood.com/custlink/3m3...
AGF A80BHMW 40KG Waterproof Metal Gear Brushless Digital Servo £69.77
www.banggood.com/custlink/KDv...
Flysky Radios and receivers
FlySky FS-FRA01 2.4GHz Fishbone Antenna 8dBi £20.83
www.banggood.com/custlink/G3v...
UK FlySky FRA01 Fishbone Antenna 2.4g 8dbi Directional Antenna £19.99
www.rcmodelz.co.uk/electrics/...
Flysky NB4 2.4G 4CH Noble Radio Transmitter w/ HVGA 3.5" TFT Color Screen £146.77
www.banggood.com/custlink/KGD...
UK Flysky NOBLE NB4 2.4ghz Transmitter & Receivers £179.99
www.rcmodelz.co.uk/electrics/...
USA version Flysky Noble Pro 2.4G 18CH Transmitter Remote Controller US Version w/ Metal Bracket Handle 3.5 Inch Color Screen FGr4B FGr8B Two Receivers US $399.99 £315.78
www.banggood.com/custlink/mDG...
UK/EU version Flysky NOBLE NB4 Pro 2.4ghz 18CH Transmitter & Receivers £399.99
www.rcmodelz.co.uk/electrics/...
FRM302 range extender £81.80
www.banggood.com/custlink/DDm...
Flysky FGR4 receiver £29.09
www.banggood.com/custlink/DK3...
Flysky GMR micro receiver £27.93
www.banggood.com/custlink/vDm...
Flysky FGR4P £29.26
www.amazon.co.uk/dp/B08LGR28Y...
Flysky FGR4B receiver £26.54
www.banggood.com/custlink/mmD...
UK FlySky FGr4B 2.4GHz 4CH AFHDS 3 Micro Mini RC Receiver £32.49
www.rcmodelz.co.uk/electrics/...
FlySky FGr8B £38.04
www.banggood.com/custlink/v3D...
UK FlySky FGr8B £34.49
www.rcmodelz.co.uk/electrics/...
FlySky FGr12B £40.33
www.banggood.com/custlink/Gvv...
UK FlySky FGr12B £38.99
www.rcmodelz.co.uk/electrics/...
Flysky FS-RM005 NB4/Noble Pro FHSS 2.4G Module Compatible Kyosho MINI-Z £38.45
www.banggood.com/custlink/Dmm...
UK Kyosho/FlySky NB4 FS-RM005 Module £36.99
www.rcmodelz.co.uk/electrics/...
ESC and Motors,
Hobbywing EzRun MAX10-SCT 120A Waterproof Brushless ESC +3660 SL G2 Motor for 1/10 Rc Car Truck - 4000KV £135.47
www.banggood.com/custlink/DKG...
TT2302 - Tekin Racing RX8 Gen3 - sensored or sensorless 1/8th or SC ESC - No limit £190.00
www.rccarshop.co.uk/tt2302-rx...
TT1452 - Tekin Racing Hotwire 3.0 - Bluetooth ESC programmer £49.99
www.rccarshop.co.uk/tt1452-ho...
RC cars
Wltoys 144001 1/14 2.4G 4WD High Speed Racing RC Car Vehicle + 3 batteries £84.64
www.banggood.com/custlink/3D3...
Gyros
AGFRC GY01 Aluminium Case High Stability Drift Tuned Gyro £31.05
www.banggood.com/custlink/mD3... - Věda a technologie
Want to thank you for your video series on the G7P. I've been out of the hobby for a bit and this radio is a bit more than I'm used to. Your videos have helped me immensely.
Happy to help :)
I know its an old video, but I just picked up this radio and this video saved me a ton of headaches. Love the radio, the documentation that comes with it is lacking. Thanks for sharing, its truly appreciated.
I'm sure I will have more vids in this radio too glad ya like it :)
very helpful video, a real walktrough to know more about this valuable radio
I try my best to cover as much as I can in them :)
Dude these videos are super helpful. Just ordered this GP7 for my Typhon 3s
You will love it especially if you get the new svc receiver :)
I believe the rx is the FS-R7P
Yes that's the one it comes with the fs-r7v is the SVC receiver with full stability control :)
Cool thanks for reply back
Thanks so much for doing this I just got mine and don’t think I could set it up for my vanquish crawler without this. Haven’t done it yet though ha.
Glad ya like it :)
@@WTFRCCars for sure I’m fairly new at this so it’s going to be a bit of a challenge to set up the dig and overdrive servos on the vanquish phoenix. Any suggested videos I should watch. I’m very much a visual learner.
Not something I've done but come find me on Facebook and I'll be happy to help just look for Craig with the wtfrccars logo ;)
I'm in the same boat mate did you get your vanquish setup?
Not sure what you need as I don't have a vanquish phoenix but join the Facebook group wtfrccars and I'll see if I can help you as ya can send pics on there so it's easier for you to show me what your working with :)
thanks for video ! helped me so much !
Happy to help 🙂
Thanks so much for your video. One irritation I have is what button to press, Up and Down or Left or Right, to get around the menu. It's always a mystery of button to get the result I want.
Think of it like this, right is enter, left is back out or esc, then it's just up and down to select :)
@@WTFRCCars I will give it a try. I have had Spectrum and futaba radios before, but have not had the problems like this. Thanks for your reply!!! Harold
Another question. You set the ESC frequency to Other 333 I believe and noted that it should work for most ESCs. I have a Arrma BLX100 esc do you think I should do the same? Sorry I've had nitro cars in the past and this is my 1st full electric so I'm still figuring some stuff out
Yeh most servos and esc can run fine at 333hz traxxas ones need 280hz cos there not that good lol
@@WTFRCCars thanks thats gonna help me out figuring this all out
great video, i just ordered this radio and 4 receivers for all my cars and this made me less nervous about doing this. One question though...my element ecto doesn't have a power switch so would i just hold the bind button then plug in the battery?
Yep :)
@@WTFRCCars sweet, thank you so much :)
Great video, thanks. My g7p doesn’t confirm binding but if I turn it off and on again it seems to be binded. This works fine but I am having trouble knowing if I’ve saved new receiver settings- it says I must rebind after changing servo freq to digital, but I don’t know if it’s rebinding or just connecting again. Hope you can help, thanks!
You need to bind in 2 way not 1 way with this receiver
@@WTFRCCars haha you identified the issue without even knowing, that’s proper understanding of something right there! Thank you!
No worries :)
Thanks for putting this video together. What happens if you do connect the positive and negative on the BVD to monitor the voltage on the battery that is powering the whole system? I know you’re telling us not to connect the negative if it’s for the main battery pack but you’re not telling us what will happen if you do. Does this apply to the Noble NB4 Pro as well?
Yes it's the same for the nb4 and noble pro, when monitoring the same battery that the receiver is running from - is not required as the receiver already has the - connected, if you connect the - pin correctly to the same lipo nothing happens but it's not required, if unfortunately you connect it wrongly to any of the + pins the receiver and possibly your ESC too will instantly be destroyed due to the short circuit this creates and so this is why it's always safer not to use the - on the main lipo, it's not needed and also damaging if a mistake is made, however on a battery that the receiver is not running from it will not damage the receiver if it's accidentally connected the wrong way round as it does not create a short to - hope this helps :)
@@WTFRCCars thank you for the clarification and also for all the helpful videos! You are the reason I purchased a Noble Pro and have been very happy with it. I came from a Futaba 3PK running a Spektrum DSM transmitter module. I can’t believe all the awesome features packed into the Noble Pro for the price!
Yeh they really are great radios and glad ya like the vids :)
Good video, I'm curious if you've tried the R7P receiver with a nitro car, it's not working for me. It won't control the servos no matter which port the battery is plugged into, it's got power, but no control. Works fine with my ESCs. I would guess it expects power on CH2, and shuts down the channels if it doesn't detect power on that port.
It doesn't care or know which port it's getting power on, my best guess is you have either a short on the servo power wire or the battery you have is the nitro is dead, I'd check the battery 1st, then try it with just 1 servo also you can power it from any port let me know how you get on :)
I've just tried the one I have with 2 servos and a lLiHV 2s pack as the receiver can run from 3.5v to 9v and it works fine power it from any port and it stays connected :)
@@WTFRCCars thanks, I messed around with it some more and got it working, I think it was the combo of a digital steering servo and analog? throttle servo with the radio set to digital that was causing it to not work. Not sure, but it's working now on analog with ANT 2-way, so I'm quite happy now.
Yeh the digital setting is too fast for some of the cheaper servos and they can't keep up, you get the same issue with the nb4 and pro if you run the digital setting as it's 400hz traxxas ESC can only cope with around 280hz, some servos will work but can't track correctly so don't work properly over the full travel, I have the pro running with 1000hz servo and it's fantastic.
@@WTFRCCars much thanks for the info!
Really nice if you could zoom in on what your doing so we can see more details of your tutorial
What part cos the camera is 4 inch away from the g7p :)
Great vid and informative
I have a question , is it possible for me to use the flysky R7P 7 channel remote on my baja 5b ?
Yes it would work fine on that
@@WTFRCCars thanks
When your setting esc frequency and It lists Digital, Analog, Other is that for the servo signal. I have a analog servo atm?
Yeh analogue is 60hz :)
@@WTFRCCars thanks again for the help. Great videos I would've never got the FW updated w/o your one video.
Happy to help :)
Thanks alot mate just got my fly sky g7p was having issues trying to display on the Home Screen sensors , batteries voltage,battery voltage from esc,transmitter and range display that’s just awesome got it all done with this video if you’re thank you so much .👌👌👌🙏🙏. Btw do you know what part number or link to buy the steering wheel that has the foam for the g7p I know you have a video posting one tho I can’t find any please help thanks much appreciated 🙏🙏
I've still not found a link for it yet
@@WTFRCCars where did you get the wheel from then ? Btw is the nb4 wheel compatible? Thank you
@DannyDanny-lg9rv flysky sent it me cos I do all the vids for them but it should be on sale somewhere, nb4 wheel will fit but sticks out a bit more
@@WTFRCCars I just ordered this one off Amazon says it works with all fly sky’s ..👌
Radiolink RC Transmitter D-axis Metal Steering Wheel Replacement Accessory for Radiolink RC4GS/RC4GS V2/RC4GS V3/RC6GS/RC6GS V2/RC6GS V3 /RC8X, for DUMBORC/Flysky/WFLY RC Transmitter, Black
@@WTFRCCars hey bud I just received the temperature sensor for the flu sky g7p do you know how to attach it to the motor to get the temperature off the motor ? My temperature plug is not magnetic
i have problem when setting up G7P, after setting function for a button, it sometimes go back to not in use... Should i wait for new firmware or missised some steps to save?
It's a strange one I have it set up on a few receivers now and not come across that issue?
When i first set this up, wanting my main Lipo voltage sent back for telemetry, I plugged in both + and - wires to my lipo balance lead. And that let out the magic smoke. I don't understand why, and also I don't understand what happened because everything seems to work fine. I get telemetry correctly and the car drives fine all 3 channels. Any ideas? Is it BAD to connect the negative in that case, or is it just unnecessary?
So when monitoring the lipo you are running the ESC/receiver from you do not use the - lead from the BVD it's not required and if it connects to the + by mistake it can burn up the receiver, only a battery that is not connected in any way to the receiver directly or through the ESC needs both + and - :) as for what caused the magic smoke without seeing exactly how you have it connected there no easy way to know for sure but - BVD lead to a + would do it.
@@WTFRCCars Maybe I simply did do that backwards hookup. I guess just count my blessings. Putting 3 more of these on my other cars today - that's for the helpful info and quick reply!.
No worries hope it goes well but just ask if you not sure on anything :)
@@WTFRCCars Actually one other part I was expecting to be able to put the BVD voltage on the main display screen, but it doesn't seem to be configurable. Have you seen anything in that regard? I have a flysky quadcopter stick remote and you can customize what sensors show up on the main screen. Alarm is better than nothing, but I was expecting I'd be able to see it without having to go through menus.
Just press down on the menu stick from the main screen anytime you want to see the sensors
Hey mate amazing videos .quick question I have the same g7p with the battery sensor tho my previous one broke I just got a new one I hooked it up as normal but for some reason it’s not reading the battery voltage it says on the sensor bvd 5.2v no matter what battery I plug and also the little red light on the module board of the sensor is blinking red idk what’s going on any help will be appreciated thanks ..
I'd say you have the sensor connected to the wrong port or not got ibus set up on it
@@WTFRCCars I have it connected to the top port above bind on the receiver same as how you explained it tho what is the ibus? How do you set that up ?
So in this vid I'm showing how to use the bvd voltage wire not the voltage sensor with the led on the small black box are you using bvd or voltage sensor ?
@@WTFRCCars unfortunately my battery voltage that came with the remote broke so I purchased replacement tho they came with the small black board that has red light …
That's not a bvd that's an external voltage sensor you need to follow my vids on the external sensors not the bvd one :)
How to setup switch for lights on fs-r7p reciver ?
Depends on the lights you have.
Does it have gyro built in?
Not this receiver but if you look through my playlist for the g7p there is a SVC stability control gyro receiver
Very useful video although when I connected my bvd to my mail battery for the esc it shows my voltage is 12.5 but my battery is a 3s (11.1v) how do I fix this problem
3s lipos are not 11.1v that's there nominal charge mid point if you like when they are fully charged a 3s lipo is 12.6v, 4.2v X 3 cells :)