One beep for stop is the standard in my line of work. If you accidentally bump the horn and someone stops, that probably won't cause an accident. Accidentally one beeping someone to move could easily result in bad things happening.
I was just wondering if you've ever thought about getting a grapple type attachment for your mini digger? I have seen some that have a wider thumb then yours and a similar one in the place of the bucket. They have the bonus of being able to scissor past each other to break up material a LOT more effectively then the setup with the bucket. You probably wouldn't even need the bucket for most of a job like this one and possibly only need it for the final clean up for the site
It's Sunday and I thought sure I'll watch a demo video by you. Hey, I haul 5-7k in my dump trailer with my 2019 Ford Ranger and one thing I do when I go to dump a big load of logs is I put the parking brake on and put the truck in neutral. This way the tranny is being jolted in park and the rear brakes take the force. If on a grade, I throw down wheel chocks.
As expected and as usual, good stuff. You ever think of giving us some bloopers, outtakes, uh-ohs? Might be fun. Might be you're so good you don't ever have any. Just a thought. As always...stay safe buddy!
Hey dude you do a lot of Grcs work. I got a job coming up where I’m cutting down a group of trees on a hillside and a tall pine tree is at the top of group closest to the driveway where I’m chipping the wood. My plan is to send the other tree tops and wood tip tied to the pine tree and use the Grcs to lift them to the pine. My question is is do you think I should butt tie the tops and trunk wood as well to the tree I’m cutting or just send them to the pine and crank them to it with the Grcs. Haha don’t know if that makes sense to you but yeah I’m thinking to butt tie them as well to control the wood better I just don’t wanna create to unnecessary forces
I think I can imagine the set up you have. I think your biggest concern will be some loading that pine. How much side load it has will depend on the angle that the rope is loaded at. I say let them swing. Start small amd watch how the pine behaves. If you feel like you can do more, do it. Just stop making the pieces bigger before you break the pine 😂
Zach hourly is good on job like that getting paid if something goes wrong. More debris then estimated dumpster delays ect. Around here 9 to a grand a day mini with operator. Depending on length of day
@@ericharris893 except it’s not desk work. It looks satisfying. I know it’s gotta be a pain in the rear but the video makes it look easy and fun. I was joking when I said that I can’t believe they pay you to have so much fun, and I believe the original poster knows that.
We like your descriptive commentary as it gives us an idea of what you are thinking as you demo a garage. Blessings to you.
Awesome job. That looks like a lot of fun to do
Good video! I like watching you destroy stuff lol...
Lol, thanks for that feedback, George. I have a whole house on the schedule for next week. Debating about whether or not it's worth filming.
@@zaccheus definitely film it!
This is a good example of it ain’t always “Smash and Trash!”
One beep for stop is the standard in my line of work. If you accidentally bump the horn and someone stops, that probably won't cause an accident. Accidentally one beeping someone to move could easily result in bad things happening.
That's an excellent line of thought. Thank you for sharing that!
Hopefully the hydro is not still connected 😂😂
Look a Canadian.
I was just wondering if you've ever thought about getting a grapple type attachment for your mini digger? I have seen some that have a wider thumb then yours and a similar one in the place of the bucket. They have the bonus of being able to scissor past each other to break up material a LOT more effectively then the setup with the bucket. You probably wouldn't even need the bucket for most of a job like this one and possibly only need it for the final clean up for the site
Yeah, I've looked into getting a hydra grapple. They're a bit expensive, but being able to rotate the grapple would be areally handy, too.
Nice Work
Awesome
It's Sunday and I thought sure I'll watch a demo video by you. Hey, I haul 5-7k in my dump trailer with my 2019 Ford Ranger and one thing I do when I go to dump a big load of logs is I put the parking brake on and put the truck in neutral. This way the tranny is being jolted in park and the rear brakes take the force. If on a grade, I throw down wheel chocks.
Thays an excellent idea. I believe the fellas using the trailer had a single wheel chock. We probably should have had more 😅
Variety of jobs will keep the money flowing and that’s important 🎉🎉😂😂😂
As expected and as usual, good stuff. You ever think of giving us some bloopers, outtakes, uh-ohs? Might be fun. Might be you're so good you don't ever have any. Just a thought. As always...stay safe buddy!
Haha no, I have lots. Maybe I'll have to start keeping them and put them all together in a collection
Hey dude you do a lot of Grcs work. I got a job coming up where I’m cutting down a group of trees on a hillside and a tall pine tree is at the top of group closest to the driveway where I’m chipping the wood. My plan is to send the other tree tops and wood tip tied to the pine tree and use the Grcs to lift them to the pine. My question is is do you think I should butt tie the tops and trunk wood as well to the tree I’m cutting or just send them to the pine and crank them to it with the Grcs. Haha don’t know if that makes sense to you but yeah I’m thinking to butt tie them as well to control the wood better I just don’t wanna create to unnecessary forces
I think I can imagine the set up you have. I think your biggest concern will be some loading that pine. How much side load it has will depend on the angle that the rope is loaded at. I say let them swing. Start small amd watch how the pine behaves. If you feel like you can do more, do it. Just stop making the pieces bigger before you break the pine 😂
I want that Beemer!
I know, me too. I later spoke with the fella but he wasn't interested in selling it yet. Had the 6 cylinder in it.
Noice!
The horn is so universal 😂 like crane signals almost everyone who works with a crane knows them
Zach hourly is good on job like that getting paid if something goes wrong. More debris then estimated dumpster delays ect. Around here 9 to a grand a day mini with operator. Depending on length of day
Can’t believe they pay you to have that much fun. That went preferably. I want to do that now.
Haha I know right! Just requires someone with a little know how and the willingness to take some risk
Think it’s all fun and games huh?
@@ericharris893 I know what it is
@@toomanytrees218 it’s all just another day at the office
@@ericharris893 except it’s not desk work. It looks satisfying. I know it’s gotta be a pain in the rear but the video makes it look easy and fun. I was joking when I said that I can’t believe they pay you to have so much fun, and I believe the original poster knows that.
Ah yes the ill prepared client.
Haha, it's inevitable 🤷♂️
Try doing it by hand
Haha, that sounds like a lot of hazardous, dirty work. I think I'll stick to machines 😅
@@zaccheus I Ben doing four years it like lot of anger off
@rexwright2386 Wow man, that's intense. Good for you for sticking with it! I hope you're able to make good money at it!
@@zaccheus I use to work with my pap he Ben gone four years so it Ben a long time
Quit running your mouth then.😂