How to Trim to Fit 37" Tires on a Ram 2500 and 3500
Vložit
- čas přidán 28. 02. 2019
- Looking to fit 37's on your radius arm 4th gen Ram but you're afraid to trim? Watch this video for a guide on exactly where to trim, what wheel specs to run and what tires will fit.
Want to get your truck sitting right? Head to our website:
www.cjcoffroad.com
So many of my friends told me I can’t run 37’s on a level…watch me. Thanks Cole.
Thanks for the detailed instructions - I did today on same setup and worked great!
Ha! I was just talking to Cole about this exact setup. Time to order it now. Need more shots of the 37's on the truck at full lock.
Great video ! Exactly the info I was looking for.
Great video, guys.
Where do you have the front arms of the 2 post lift at? On the body mounts?
Hey what tire combo would you use for a 2 inch carli suspension on 35 inch tires on a Ram 1500. Thanks
Do you reccomend a gear swap for 37s the 4th gen cummins is a 3.42 and id imagine 37s would take it closer to high 2s low 3s for gearing. I have a G56 truck so I atleast have a very low 1st gear.
What model wheels are these? They look great
We can hear you Cole! Whose beautiful vehicle is this.
GO DUCKS!! Sweet rig too!
Would a +12 offset work? I really don't want to order new wheels lol
Great video! Does the same trimming apply to 2019+ 2500s with similar wheel/tire specs?
my '16 ram 2500 just finished the leveling kit, and am about to put on my 37x12.5's with stock rims. i think im going to order the 1/2" wheel spacers to help with control arm rub
Can you PLEASE do this video for a 2011-2016 Super Duty with leveling kit trying to fit 37’s?
are you good with 35''/33"___-------so no after market flares
What about the 17”x8.5” +25 to +27 offset wheels with 37’s like the AEV SALTA or METHOD CJC 315? For other than onroad / highway driving, would you need to trim the pinch weld in the case if going off-roading?
'19 Power Wagon here. Will be going with '17 or '18X9 wheels w/ 35" tires or possibly the slightly larger Toyos that are closer to 36". What offset is optimal to ensure no cutting or rubbing?
How does this all apply to the power wagon? Since it comes lifted 2” from the factory, what is needed, and what lift or level kits are compatible? Carli’s website says they’re looking for a new power wagon so the can develop the parts to work.
What about a 36\11.50
20 have you run that size