Vifly Toothstor - 2S Battery Storage Charger and Discharger
Vložit
- čas přidán 10. 03. 2024
- ► Vifly Toothstor : viflydrone.com/products/vifly...
- AE: s.click.aliexpress.com/e/_mN9...
- MF: shop.makerfire.com/products/v...
🎵 Music: bit.ly/Audiio-
╔════╡My Gear╞═════════════════════╡
║ ► Goggles - FatShark HDO2 - bit.ly/HDO-2
║ ► RX Module - bit.ly/rapidFIRE
║ ► Radio Controller - Radiomaster TX16S: bit.ly/TX16S-MAX
║ ► Battery Charger - Hobbymate D6 Duo Pro: bit.ly/D6-Duo
║ ► Lipo Batteries: bit.ly/G-N-B
╚════════════════════════════════╡
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣ → bit.ly/subscribeToMyCZcams
╠╗║╚╝║║╠╗║╚╣║║║║║═╣ I Really Appreciate Your Support!
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
Find Me On Facebook:
► / kremerfpv
Instagram:
► / kremerfpv
Please consider supporting my channel by using my affiliated links:
* Banggood: bit.ly/BG-Kremer-FPV
* Caddx: bit.ly/CADDXFPV
* Flywoo: flywoo.net?sca_ref=512433.6TrebOmVvl
* iFlight: bit.ly/iFLight
* RadioMaster: bit.ly/Radio-Master
* RDQ: www.racedayquads.com?aff=26
* Rotor Riot: store.rotorriot.com?aff=10
It doesn't add any extra cost to you and will help me to grow my channel and bring you high quality updated content.
Thanks in advance!
Description:
VIFLY ToothStor - 4 Port 2S Balance Charger with Storage Mode Compatible w/XH2.54 and BT3.0
Features:
【4 Port 2S Balance Charger with Storage Mode】You can balance charge four 2S batteries at the same time. And they are 4 independent charging channels, not necessary to ensure the batteries are all the same voltage or the same size. In addition to charging the battery to full voltage, you can charge or discharge it to storage voltage for long time storage.
【Colorful LCD Screen, Intuitive Interface】VIFLY ToothStor installs high quality LCD screen, the charging status is displayed clearly and the intuitive interface makes the operation very simple.
【Support XH2.54 and BT3.0 Batteries】VIFLY ToothStor pre-soldered four XH2.54 and BT3.0 connectors, so it can work with any general XT30 2S battery with 3Pin XH2.54 Balance Plug or BetaFPV BT3.0 battery, but don’t put the two batteries in the same port.
【Strong Heat Dissipation Capability】The fan and big heat sink would effectively dissipate the heat to prevent the unit from overheating. This greatly improves the efficiency and speed of the discharging.
【Multiple Power Input】It supports Type-C, XT60 and DC power input. Type-C supports PD3.0 protocol that requests the input power must be higher than 65W.
【Memory Function】VIFLY ToothStor had the memory feature of remembering last time settings, no need to set the charge current every time you turn it on.
【Buzzer Indication】VIFLY ToothStor added the buzzer to beep when one charging circle finished, if you don’t like beeping, you can turn the buzzer off manually.
Specifications:
Dimensions: 109*56*30mm
Weight: 142g
Input connector: XT60, DC(5.5*2.1mm), USB-C(PD3.0)
Input voltage range: 10V-26V
Minimum input power: 65W
Max charging current: 1.5A/port
Support battery connector: XH2.54 3Pin & BT3.0
Battery type: LiHV / LiPo
Storage voltage: 3.80V/Cell & 3.85V/Cell
Max discharge current: 0.2A/port
Balance Current: 0.2A
Package Included:
1x VIFLY ToothStor Charger
#vifly #toothstor #batteryCharger - Věda a technologie
Awesome review, Gal! Thanks! 😊
Stay safe there with your family! 🖖😊
Thanks Mario!
Great Review. Always enjoyable to watch. Thank-you for the intro review.
Thank you, I appreciate it!
Gal, Thanks for your review.
My pleasure
interesting to see BT3.0 connectors. Haven't seen any battery that uses and it makes me think if its gonna be like a xt30 equivalent or just for the balance leads
👍
It would be great to show how to use the air unit with a Spektrum TX and rx (how to power the air unit, is there a way without soldering, is there ready-made cables). The only power source that I have available on the aircraft is 6s lipo balance lead , or the spektrum receiver with extra 2 channels - Aux 2 and 3). And the question that I am not able to find its answer: could the air unit act as an rx in case using the dji TX? , and in this case how to connect the 5 or 6 surface control channels!! (Throttle, ailerons, elevator, rudder, gear, flaps). Thanks
I have a very similar charger HGLRC Thor 1-2S 4-way charger that charges through the Balance leads, and chargers 4 2S batteries independently, or a mix of 2S and 1S batteries all at the same time, the Vifly Toothstor charger looks to have an advantage as it has a discharge function.
Is it USB powered as well?
@@KremerFPV HGLRC Thor 1-2S Charger has an input voltage 7V-25V via XT60 or barrel connector no USB input, I do think the Vifly Toothstor is the better changer, and I am certainly considering owning the Vifly Toothstor.
@@cyberess1000 No worries, I just don’t remember seeing not testing this charger. Happy flying!
Charger kecil yang cukup bagus dan simpel
😎
Subscribed!! lovely CZcams channel!! I hope you have a video on installing head tracker and a dji air unit on cockpit of rc fixed wing model, or showing the connections and setup, camera mount, etc or showing that on a demo board / drone. Are you aware of good head tracker and camera mount compatible with dji air unit?! Thanks
Thank you. For now that's not something that I plan to do, but thank you for the suggestion.
If the max current on the balance port is 0.2a, how are you charging at 0.6? Have you timed how long it takes?
0.2A is the balance current. It took about 30 minutes to charge a 666mAh 2 LIPO battery from 7.6V to 8.4V on 0.6A.
Just received mine. Works okay for the size and price.
If the cells are unbalanced, it takes for ever to charge.
Also the last part of the charge needs a few minutes.
I like the portability and that you can power it from a lipo or usb.
Yes, the balance charging is only 0.2A. It's ok though for smaller batteries.
Guidelines for comments feels like limitation of freedom. It always bugs me these chargers need an adapter for xt30 I don’t usually like the proprietary connectors I understand it some weight savings but to me this is negligible more amperage through xt30 offsets the cons
I don't think my rules are strict at all :-)
Yes, an XT30 adapter could be nice but in my opinion it's not necessary. I will be mainly using the USB C port.