DIY DJI O3 Gimbal // HEQ G-port
Vložit
- čas přidán 10. 05. 2024
- ► HEQ G-port: s.click.aliexpress.com/e/_mM2...
- BG: www.banggood.com/HEQ-Gimbal-G...
- Directly From HEQ: store.hequavtech.com/products...
🎵 Music: bit.ly/Audiio-
- G-Port Firmware / Assistant: store.hequavtech.com/pages/su...
╔════╡My Gear╞═════════════════════╡
║ ► Goggles - FatShark HDO2 - bit.ly/HDO-2
║ ► RX Module - bit.ly/rapidFIRE
║ ► Radio Controller - Radiomaster TX16S: bit.ly/TX16S-MAX
║ ► Battery Charger - HOTA D6 Duo Pro: bit.ly/HOTA-D6-PRO
║ ► Lipo Batteries: bit.ly/G-N-B
╚════════════════════════════════╡
╔═╦╗╔╦╗╔═╦═╦╦╦╦╗╔═╗
║╚╣║║║╚╣╚╣╔╣╔╣║╚╣═╣ → bit.ly/subscribeToMyCZcams
╠╗║╚╝║║╠╗║╚╣║║║║║═╣ I Really Appreciate Your Support!
╚═╩══╩═╩═╩═╩╝╚╩═╩═╝
●▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬●
Find Me On Facebook:
► / kremerfpv
Instagram:
► / kremerfpv
Please consider supporting my channel by using my affiliated links:
* Banggood: bit.ly/BG-KREMERFPV
* Caddx: bit.ly/CADDXFPV
* Flywoo: bit.ly/FLY-WOO
* iFlight: bit.ly/iFLight
* RadioMaster: bit.ly/Radio-Master
* RDQ: bit.ly/R-D-Q
* Rotor Riot: bit.ly/ROTOR-RIOT
It doesn't add any extra cost to you and will help me to grow my channel and bring you high quality updated content.
Thanks in advance!
Description:
HEQ Gimbal G-port Compatible with DJI O3 Air Unit/WalkSnail CADDX Support Sbus Pwm Mavlink for RC Airplane Fixed-Wing FPV Racing Drone
Product Introduction:
-G-port is a 3-axis gimbal component developed by HEQ for FPV enthusiasts and fixed-wing drone hobbyists.
-G-port boasts high stability and supports both upright and inverted installations.
-It is compatible with DJI 03 or CADDX, supports three inputs: mavlink, sbus, and pwm.
-It is adaptable to various flight platforms.This allows users to quickly assemble their personalized gimbal camera.
Tips: This gimbal cannot support DJI 03 Unit and Caddx camera at the same time. Please contact us to determine which model needs to be adapted before purchasing.
Specifications:
Axes: Mechanical three-axis
Weight: 67g
Dimensions: 48.5x49x67.5 mm
Gimbal Angles:
Pitch:-135° to 45°
Yaw: -135° to 135°
Roll: -45° to 45°
Supported Control Modes: sbus、pwm、mavlink
Supported Camera Types: DJI O3/CADDX
Supply voltage: 12-24V
Package Included:
1x G-Port 3-Axis Gimbal Component
#heq #gimbal #gport
Very cool! used with head tracking will be awesome!
Thanks Gal for the detailed introduction!😁looking forward to your next video!
Love you're videos brotha 🤘😎
Great video! Im impressed by the dvr footage.
Can you make a tutorial with this product and the head tracker?
Fantastic ride and review, Gal! 😃
Lets see it on top a FPV quad with headtracking.
Very interesting and informative video. Was curious how well it would handle an rc car. Footage looked reasonably stable, especially considering how much the gimbal looked to be vibrating. 😎
Sorry to ask such a basic question, but if the controller controls the movement of the gimbal, how do you control the vehicle? One more question. I am thinking of getting this for my Foxeer Aura 8 because no matter what I do, I can’t get rid of some vibrations and jello. Would using this gimbal solve that issue?
Wait I'm confused. Does the O3 version work for both the O3 as well as the Vista and V1 Air Unit or is it only the O3? You said the O3 version was only compatible with O3 then you said the DJI version is only compatible with the older version of DJI VTX? Did you mean to say the Caddx Version is compatible with the V1 or am I confusing something here? All the sites I've seen have either O3 or Caddx options available and I wasn't sure if Caddx meant Walksnail or the Vista. If you can clear this up for me I'd greatly appreciate it. I am probably going to buy the O3 version regardless (although I doubt I'll use it on a quad) but it would be cool if I misunderstood and it is compatible with both O3 and OG DJI Air units. Thanks for all the vids you make
I have had an o3 air unit shut down mid flight while stories up which caused my hexacopter to be destroyed. It's quite annoying.
how did you get the 03 out of low power mode? in goggles? is there a way to do it via an extra UART on the FC?