My Mark5 arrived at my home while I have been traveling for work for a month. I can’t wait to get home to fly the Mark 5. In the meantime, I keep watching this video over and over again. It’s probably been about 50 times that I have watched this video😊
Can I use it with DJI Controller 2 that I got from my DJI FPV combo? I wanna get this Geprc mk5 and use it with my goggles and controller that I got from DJI FPV combo. I’m sure I can use my DJI goggles v2 with it but I can’t find anything about the controller? 😞
@@NONX01 Yes you can, as long as you get the DJI O3 version. Make sure to select PNP (plug and play) for the receiver option. This means they are not going to put any receiver in the quad because you will be using the O3 camera module as your radio receiver.
@@Binkoro thank You for such a quick response that’s exactly what I thought is the right thing to do in this setup thank you so much once again gonna order it literally right now, it’s in stock 😁 Don’t want to do it with DJI FPV no more, I still think it is a perfect choice for a first drone but at this point I start to feel how hard it limits me. I will still use it and take it all with me to use it as a hanging camera for pure cinematic shots in N mode. I got the entire case for the FPV Combo so I will just add Geprc to my backpack and I’m ready to go and can use both at any time.
@@Binkoro hello again so I’m literally on Geprc website trying to make a purchase and I just wanna make sure cos I’m a bit confused with the “receiver” terms and PNP. So like I said I have DJI goggles v2 and DJI controller 2 and I want to use it with my Geprc - it says if I order PNP they won’t add a receiver because I’m using O3 system - what does it mean exactly? I want a DC version that doesn’t require a gopro for “propellerless” footage without a GoPro. Does it mean that I need to order something extra with the drone?
@@NONX01 The Mark5 really is an amazingly smooth flying experience, especially the X Frame. If you are using the DJI FPV for cinematic experience, the Mark 5 should be used for the experience of flight. I use Cinewhoops and DC framed drones for cinematic, but you definitely need at least one X frame drone for the experience of flight. The Mark 5 X frame is that one for me. Couldn't be happier. Also, it's very durable, unlike the DJI FPV drone.
Just finished my build. Love it! Flys great. This is my 3rd Mark 5. DJI Vista, Walksnail and now DJI O3. Building is enjoyable and saves you a few bucks. Bought the first 2 Mark 5s. Can't beat this great flying Drone. Nice review.
Nice! How much is the frame kit for this one go for? What motors and FC setup did you go with? What kind of build? 4S or 6S? Im looking to stick to 4S for right now, but i love to see the 6S builds too lol..
Can I use it with DJI Controller 2 that I got from my DJI FPV combo? I wanna get this Geprc mk5 and use it with my goggles and controller that I got from DJI FPV combo. I’m sure I can use my DJI goggles v2 with it but I can’t find anything about the controller? 😞
I just bought my first drone, and honestly it's my first FPV drone. Out of all the videos you have Steve, I must thank you for all the information. Between the FPV beginner for dummies videos and reviews like this, it helped me make informed decisions and I can thankfully say I'm hyped to be getting my mark5 and knowing I can always come back to figure out how to link them together and use betaflight/speedybee etc So thank you for the information and the review of the mark5 I can't wait to fly it!!!!
@@CAPTAINDRONE798 so I did my maiden flight with the mark5 yesterday, was a little short lived as I only had one battery. But all went great. I decided to listen and bought some 4S batteries as I'm new and new to FPV (thanks to your advice I still have a drone) but today I took it out and I didn't look at the controller and didn't realize it was in acro mode. Well needless to say I'm impressed with the durability. Slammed straight into the ground (O3 air unit wasn't touched surprisingly) at full speed. Broke some props and cut some battery line but outside of that, no damage to the drone. Had this been a 6S battery, I do not think I would have a drone with just a broke prop. So Steve, all in all. Your beginner videos are so so so helpful. Also the reviews with different drones. Last but not least you are an amazing person for doing this for the community and making it very easy to follow. All in all, Sometimes it's good, sometimes it's **** lol I got my dad into this now as well haha so I'll at least always have a wingman. So thank you for also bringing us closer as well We don't agree on much but this is definitely amazing so thank you!!!!
@@CAPTAINDRONE798idk if my other comment posted but needless to say, I had my maiden flight with the mark 5 yesterday. Was amazing. Short lived. Only one battery. Ordered batteries from Amazon and went out again today. Listened to your advice and got 4S even though it's rated for 6S. Needless to say, I crashed. Not just opps crashed but hard enough that I thought the drone was definitely broken. It went straight down (didn't check the controller and was in acro mode, not angle mode) 03 air unit camera was the main impact area. No damage but a broken prop. No damage to the camera or air unit and no damage to the drone, very impressed with the durability. Had this been a 6S at full speed like today. I don't think I would have a drone that didn't just require props to be switched. You also brought myself and dad closer together and I'll always have a wingman now. He went and ordered his drone same night after flying mine. Thank you for the how to beginner videos and making my father and myself that much closer.
Been learning to fly with a self built Mark 4. It flies pretty well, not that I have anything to compare it to…I like some of the upgrades that the mark 5 has…might build an HD version once I’m more comfortable with my abilities as a pilot. Currently flying los. And just got the rest of the gear needed to FPV with my DJI v2 goggles. Excited for better weather!
for the 03 and geprc, it's a quick release model to have a drone with the 03 as quickly as possible, but you have to wait, because the propellers in the field is a "don't buy" it's useless unless you have plenty money to spend. because geprc will soon have the opportunity to make a Frame with the propellers out of scope. you have to wait a bit for drones with 03 on board!!!
Not better, but rather different. The iFLIGHT looks like a million bucks and it is large with 6" props. The MARK 5 is a 5" drone in an X frame, so if you are buying for FREESTYLE, the mark 5 wins. If you are buying for other things, the iFlight wins.
Just bought the same drone in orange 🍊 and I love it thank you for a thorough and detailed review. Seeing it operation really helps with the decision making process on the drones and this review made the decision for me thanks a bunch for the videos and the education brother much appreciated!!!
another stellar review Steve, God every time i see one of your fpv reviews im sure i want an fpv. you make it look so easy and smooth. then my friends bring me back down to earth by saying you just fly camera drones. to which they are right. I only fly and have one camera drone its a mavic mini flymore combo. when i bought it I thought it was the best thing ever. Now im trying to upgrade to a mini 2 just because i love the size and feel of my original mini but the controller seems so much better on mini 2 and having the lipo batteries means more power. i dont even dream about the mini 3 although ive heard rumors that the price may be dropping to mini 2 prices. Have you heard anything?lol Anyways i digress. my dream is to fly fpv but they tell me its a really hard transition and I dont want to invest a bunch of money just to find out i hate it. I know to most people its not a lot of money but i lost my business with COVID and since then the cost of living has skyrocketed in western Canada. So needless to say, something as simple as $600-900 can make or break me. Do you have any good ideas on the best bang for the buck beginner set-up. Ive asked you before but that was a year or so ago. since then ive been able to save a little money. this rc hobby is my only vice and it keeps me sane.😛
The new Mini 3 is a bit more expensive than the Mini 2, but the mini 2 is dropping in price so things may even out eventually. FPV is difficult for sure but everyone who tried it and stuck with it began at level zero. Unfortunately if you fly DJI drones then it is even harder to learn FPV because the DJI drones are designed for first time pilots where the FPV drones are not. I learned this first hand as I use to only fly DJI drones long ago. Get yourself a BetaFPV Cetus all in one FPV kit and that will slowly get you into the hobby.
@@sheiladavis2304 get a controller and lift off simulator, that way you'll learn to fly with very minimal costs, I didn't fly in real life until I had put 24 actual hours into the sim
So I'm sure there are plenty out there but I honestly can't find anything for FPV as a sim so I don't destroy the drone I just bought. Is there anywhere I can go to find a good realistic one. I don't mind paying for it as I play games anyways so it'll be another game to me. But as it sits google is a bit empty handed or I just don't know how to find them.
another great review Steve nice fpv fly's well prise a bit much for me but keep them coming. if we don't see you on you tube be for Christmas have a merry Christmas to you all.
In my opinion, this design has one defect If we do not use an additional camera during a collision, the battery may be damaged / cut by the top panel which has a slight step. This small step has already destroyed several of my batteries. I love this drone but it's toxic love ;)
Okay I ordered the same exact one 6S and PNP green. I hope it is good. It will be delivered Tuesday and I ordered more accessories also. Two packages of XT60 to XT30 adapters just in case two of the new chargers you reviewed called toolkitRC M7AC two new CNHL 1300mah 6S 22.2V 100C (burst 200C) black series XT60 lipo batteries and 4 CNHL 1500mah 6S lipo 22.2V 100C batteries along with a new Frihobby 5 in 1 drone tool kit. I’m putting my trust in you with this review. Thank you for all your hard work. I will update you.
Bought the Walksnail version of this quad Dec 2022. Current meter burnt out in two flights. No crashes. Geprc support didn't offer a paid shipping label. I paid for shipping from US to China. Quad got lost in the mail after it cleared customs in China. Tracking last ping was Jan 8 23. Geprc support acting like I broke it, I shipped it back, tough luck.
I made a video years ago about AMERICANS that think CHINA operates under the same consumer guidelines. There is NO... "the customer is always right" in CHINA, and there is no "please send it back to us for repair". If ever you receive something like an FPV drone from CHINA and you have an issue... NEVER SEND IT BACK. Instead, identify the problem (usually a flight controller) and ask them to send you the replacement part and 99% of the time they do.
I ordered this one, too. So far all my FPV drones have been based on your recommendations: Cetus X, Pavo25, Cinelog35 V2, Cinelog20, and Mark 5! Hopefully that is all I need! The last three ones are with the O3 system although I still have to manually install the O3 system in the Cinelog 35 V2 (after removing the analog system). Hope I don’t destroy it! Still waiting for the last two to be delivered!
@@CAPTAINDRONE798 Can I use it with DJI Controller 2 that I got from my DJI FPV combo? I wanna get this Geprc mk5 and use it with my goggles and controller that I got from DJI FPV combo. I’m sure I can use my DJI goggles v2 with it but I can’t find anything about the controller? 😞
Great review and I see they changed the view and some tpu with some nice colors but I can see people who are coming from dji fpv or a DJI Avata want to get into traditional fpv for freestyle or any other stuff they want to do so great review splendid
Great review Steve. The only little observation that I have is that the Flight Controller and the ESC seems to be exactly the same, with exactly the same features. The specs and the name are absolutely the same (and the old one had bluetooth as well, so I think they are the same). The difference might be on the tuning.
can you please add the DJI controller setup with beta flight or speedybee. i dont know how to arm the drone with the controller. not sure what im missing.
Hey Captain! You’ve spent quite some time on showing how propellers are affecting the footage while using O3 on various settings. Shame you have not mentioned that this exact drone also comes in DC (Dead Cat) configuration which greatly reduces that problem. Thanks for the review tho. I’m FPV newbie and I’m not willing to carry extra cam on it and only relay on O3 system and for that reason I went with a DC configuration. Cheers!
The X vs Deadcat is mentioned many times on my channel, as long as you are a subscriber. When this vid was made, last month, the option of DEADCAT was not available. I get products often before they are launched to the public and the reviews are made early and launched later. The info I have is relevant at that time.
@@CAPTAINDRONE798 that makes sense, thanks. I can’t find frame parts for DC tho - maybe it’s still considered as too new? One last question: for life I can’t find geprc presets repository address to make it available in my Betaflight configurator in “presets tab”- any idea where that might be? Thank you
@4:41 the other option is to get the dead-cat design .. and the props are not in view. Is there anything wrong with that one? Why did you only pick the X-design to review?
Nice! Whats a good PNP/BNF FPV Drone that maybe comes Analog stock, and then i can add my new O3 Air Unit that i already have. It seems i should of just waited to buy a BNF with the O3 already in it but i think its been too long to return it, plus i bought it so that i could use it with my FPV V2 Goggles and RC2 or Frsky RX depending on how it comes and how it feels really.. Then i will get either Crossfire or ELRS i think.. Im looking for that $150-200 fpv drone youre talking about that would be fine for a beginner pilot to basically learn on for as long as it lasts. Because like you said, i probably cant feel the difference between a 150/200$ drone and a 350$ analog version drone like these.. Once i learn and crash a bunch of times, then ill buy the nice fpv drone i want like the iFlight Nazgul F6x. I have only a few hrs of Acro sim time and then maybe 5hr total of fpv flying in Angle mode on a super old analog fpv drone with a FC from 2016 lol, but it worked and deff took some abuse. I basically never hovered in place unless you constantly were adjusting it, but then again it didnt have gps or anything like that just the bare minimum. Im also not against going diy especially if i can get the nicer frames, but i wouldnt want to build anything smaller than 30x30 in a 5/6". The problem is that i dont know what the name brands are and what arent and whats a good deal and whats overpriced for what it is. I dont mind spend money on better quality but only really as far as better components or more reliability.
Hi. What receiver option should be chosen if I want to use dji Remote controller ? ELRS 2.4 G ? I'm new in fpv... Thansk for this review !! A lot of info here :)
@@raymundogomez3667 In the Chinese Drone world it is kind of backwards because PLUG AND PLAY means you will PLUG in a receiver. BNF (BIND AND FLY) means the receiver is already present and then you bind to it. So they should list such drones as BNF but they always list them as PNP.
This might be the one that gets me over the line - but then I say that on every alternate review.. Thank you for this one - I liked all that I saw and heard. As an aside, do you know if there is an aircraft-style joystick option for controlling drones available?
Would you recommend this over the new Nazgul5 V3 O3 6S HD? I am looking for a good cinematic travel drone, a little bit more powerful (yet not crazy high speed) than the Explorer LR 4 HD DJI O3 Sub250 for my adventure trips. I am also considering the iFlight BOB57 O3 too. Out of the two 5 inches and the BOB57 what do you think would fit perfectly in the travel/cinematic category? new Geprc Mark 5 / Nazgul V3 / BOB57 ?
The NAZGUL and MARK5 are super nice FPV Drones. Way different than your Explorer and way more capable in the FPV hobby (they are not long range but rather true FPV drones). You can't go wrong with either.
@@CAPTAINDRONE798 i actually ended up ordering the iFlight BOB 57 it’s a 6” cinematic long range with freestyle capabilities, and with a 1800 6s lipo it can fly around 9-12mins with a 3000 I can push it to 15-16mins.
Do they make this drone in analogy and out of this GEPRC drone, the Emax Pro or the Iflight Nazgul 5, which would you recommend I get? I don't want to spend a fortune but I want a good fast drone.
Hola.....quick question. I wired up an RXSR receiver on my Gep Rc Mark 5 and configured everything on Beta Flight. When I arm the quad and give it a little throttle, the quad jolts, spins (yaw) a couple times, and drops to the ground. Never had this problem, and have no idea. Any advice? As always, appreciate all your help! Thanks! Chris
Did you setup your joysticks correctly in Betaflight Configurator? So throttle, roll, pitch, yaw are correct. Props on correct? You have done something wrong or missed a setting, but you’ll eventually figure it out.
Hello, I was thinking of getting this drone with the DJI controller 2 and googles 2 . If I understand it correctly , using these goggles and controller with this specific drone with the 03 system the drone doesn't need a receiver to work yes? if I choose the PNP version so to speak? The follow up question to that would be; If I choose to buy the ELRS receiver to "future proof" the drone, would the drone still work as normal if I connect the DJI stuff to the O3 system that is still within the drone? Glad I came across your channel and your informative videos !
The answer is. Yes, PNP version will work as long as you watch my video: CAPTAIN DRONE FPV FOR BEGINNERS EPISODE 12 As for ELRS, the answer is… Nope it won’t work unless you know how to correctly adjust the UARTs, etc.
Thanks for the great review! I am loving the cinebot 30 that I purchased after your recommendation. Just wondering how you would compare this with the DC version and if you think there would be a huge difference in performance especially since I am a low intermediate. Thanks!!
I am looking to get the MARk5 DC ELRS 2.4ghz version o3 air unit. Which controller should I buy? Im a noob so still learning the lingos and stuff. I was gonna go with the DJI controller 2 or the TX16s. If I get theTx16s do I need anything else to be able to fly the drone.
Just got the O3 frame for my new build but it doesn't look to have any immortal T antenna mounting. Anyone have any recommendations on adding that or 3d printing that?
Apologies to sound like I’m not reading enough but I’m ready to pick up the GepRc MK5, what’s throwing me is it’s asking which receiver I want. I have DJI goggles and the joypad from my DJI FPV which link straight to the o3 system so why does it give me 3 options of receivers? Again sorry to sound a little dumb but the drone world is much more detailed than the RC truck world so still many things I’m getting my head around. 🌪️
Have you watched this video from beginning to end… the end tells you what receiver to AVOID: watch my video: CAPTAIN DRONE FPV FOR BEGINNERS EPISODE 12
There is no BEST drone in the FPV world because it comes down to what the pilot can do. Both of these FPV drones are super good, so go for the one at the lower price.
You pick the PNP (stands for PLUG AND PLAY) version. Do a search on CZcams for this video so that you understand what is required: CAPTAIN DRONE FPV FOR BEGINNERS EPISODE 12
Hey. Thx for the video. Maybe someone can answer a few questions for me as I am a newbie. On the Geprc homepage u can choose different option of this drone (three 4S and three 6S models) what are the differences? As the vary around 50$ in price. Which batteries are the best to recommend? So between weight & power. So is a 3000 mA battery too big for example? Thx in advance 🙏🏽
Hello! Is the frame compatible with Caddx Vista. I have DJI Goggles 2 which I use with my Pavo20 + DJI O3. But I want to try 5" frame with less expensive VTX from Caddx Vista. Thanks.
Isn't it better for prop direction spinning outwards, so that there will be less dust on the camera? What is the reason Geprc is directing them spinning inwards?
I recall, 10 years ago, spending countless wasted hours on forums debating that. Fun times! Don't loose sleep over it because the answer is.... It doesn't matter.
Bought a Geprc drone about 2 years ago its never flown even an inch off the ground and Geprc services was useless.. maybe i was just unlucky but I'd never buy 1 again
I e never used Fat shark goggles and not sure what they match up with but I have been looking at maybe buying a pair of Dominator Fat Shark. I fly in stick mode 3 and the DJI controller 2. So what setup do you think? I fly with the DJI V2 goggles now also.
Hi Steve. Newish to the hobby. I used the previous mark 5 frame for my build and a speedybee f7 stack. I’m wondering if there’s a way to apply the same tuning to mine?
I’d contact GEPRC to see if the flight controllers and ESC control are the same. If they are, then ask for the DUMP file and you’ll have the same tuning.
Hello, could you give me some advice? Can I fly on Geprc Mark5 on this battery fast and in freestyle mode: GEPRC 6S 1550mAh 60C Battery ? Or must I buy this battery: GEPRC Storm 6S 1300mAh 120C Lipo Battery? Thank you for answer.
Thanks for the review! What are you using to attach the gopro to the mount? I know there’s the long screw that goes through the gopro mount and through the “legs” of the 11 mini, are you then just using a random bolt on the other side that screws into the long screw?
My Mark5 arrived at my home while I have been traveling for work for a month. I can’t wait to get home to fly the Mark 5. In the meantime, I keep watching this video over and over again. It’s probably been about 50 times that I have watched this video😊
Can I use it with DJI Controller 2 that I got from my DJI FPV combo? I wanna get this Geprc mk5 and use it with my goggles and controller that I got from DJI FPV combo.
I’m sure I can use my DJI goggles v2 with it but I can’t find anything about the controller? 😞
@@NONX01 Yes you can, as long as you get the DJI O3 version. Make sure to select PNP (plug and play) for the receiver option. This means they are not going to put any receiver in the quad because you will be using the O3 camera module as your radio receiver.
@@Binkoro thank You for such a quick response that’s exactly what I thought is the right thing to do in this setup thank you so much once again gonna order it literally right now, it’s in stock 😁
Don’t want to do it with DJI FPV no more, I still think it is a perfect choice for a first drone but at this point I start to feel how hard it limits me.
I will still use it and take it all with me to use it as a hanging camera for pure cinematic shots in N mode. I got the entire case for the FPV Combo so I will just add Geprc to my backpack and I’m ready to go and can use both at any time.
@@Binkoro hello again so I’m literally on Geprc website trying to make a purchase and I just wanna make sure cos I’m a bit confused with the “receiver” terms and PNP.
So like I said I have DJI goggles v2 and DJI controller 2 and I want to use it with my Geprc - it says if I order PNP they won’t add a receiver because I’m using O3 system - what does it mean exactly? I want a DC version that doesn’t require a gopro for “propellerless” footage without a GoPro.
Does it mean that I need to order something extra with the drone?
@@NONX01 The Mark5 really is an amazingly smooth flying experience, especially the X Frame. If you are using the DJI FPV for cinematic experience, the Mark 5 should be used for the experience of flight. I use Cinewhoops and DC framed drones for cinematic, but you definitely need at least one X frame drone for the experience of flight. The Mark 5 X frame is that one for me. Couldn't be happier. Also, it's very durable, unlike the DJI FPV drone.
Just finished my build. Love it! Flys great. This is my 3rd Mark 5. DJI Vista, Walksnail and now DJI O3. Building is enjoyable and saves you a few bucks. Bought the first 2 Mark 5s. Can't beat this great flying Drone. Nice review.
Nice! How much is the frame kit for this one go for? What motors and FC setup did you go with? What kind of build? 4S or 6S? Im looking to stick to 4S for right now, but i love to see the 6S builds too lol..
Can I use it with DJI Controller 2 that I got from my DJI FPV combo? I wanna get this Geprc mk5 and use it with my goggles and controller that I got from DJI FPV combo.
I’m sure I can use my DJI goggles v2 with it but I can’t find anything about the controller? 😞
Hi Steve......Great review......Loved the green color myself.........👍
I just bought my first drone, and honestly it's my first FPV drone. Out of all the videos you have Steve, I must thank you for all the information. Between the FPV beginner for dummies videos and reviews like this, it helped me make informed decisions and I can thankfully say I'm hyped to be getting my mark5 and knowing I can always come back to figure out how to link them together and use betaflight/speedybee etc
So thank you for the information and the review of the mark5
I can't wait to fly it!!!!
Glad to help with my videos and wish you plenty of success on your first FPV flight
@@CAPTAINDRONE798 so I did my maiden flight with the mark5 yesterday, was a little short lived as I only had one battery. But all went great. I decided to listen and bought some 4S batteries as I'm new and new to FPV (thanks to your advice I still have a drone) but today I took it out and I didn't look at the controller and didn't realize it was in acro mode. Well needless to say I'm impressed with the durability. Slammed straight into the ground (O3 air unit wasn't touched surprisingly) at full speed. Broke some props and cut some battery line but outside of that, no damage to the drone. Had this been a 6S battery, I do not think I would have a drone with just a broke prop.
So Steve, all in all. Your beginner videos are so so so helpful. Also the reviews with different drones. Last but not least you are an amazing person for doing this for the community and making it very easy to follow.
All in all,
Sometimes it's good, sometimes it's **** lol
I got my dad into this now as well haha so I'll at least always have a wingman. So thank you for also bringing us closer as well
We don't agree on much but this is definitely amazing so thank you!!!!
@@CAPTAINDRONE798idk if my other comment posted but needless to say, I had my maiden flight with the mark 5 yesterday. Was amazing. Short lived. Only one battery. Ordered batteries from Amazon and went out again today. Listened to your advice and got 4S even though it's rated for 6S. Needless to say, I crashed. Not just opps crashed but hard enough that I thought the drone was definitely broken. It went straight down (didn't check the controller and was in acro mode, not angle mode) 03 air unit camera was the main impact area. No damage but a broken prop. No damage to the camera or air unit and no damage to the drone, very impressed with the durability. Had this been a 6S at full speed like today. I don't think I would have a drone that didn't just require props to be switched.
You also brought myself and dad closer together and I'll always have a wingman now. He went and ordered his drone same night after flying mine.
Thank you for the how to beginner videos and making my father and myself that much closer.
Gorgeous beast of a drone. Geprc is on 🔥 with this and the cinebot
Your review sold me. Had no intention of buying 5" anytime soon, but saw this Tuesday and the mark5 comes tomorrow. I got the DC version too.
If you are currently an FPV pilot, then you'll certain love this quad. If you are a total newbie... watch out as it is powerful.
@@CAPTAINDRONE798 I'm very comfortable in acro.
Then prepare to have plenty of fun!
Been learning to fly with a self built Mark 4. It flies pretty well, not that I have anything to compare it to…I like some of the upgrades that the mark 5 has…might build an HD version once I’m more comfortable with my abilities as a pilot. Currently flying los. And just got the rest of the gear needed to FPV with my DJI v2 goggles. Excited for better weather!
Im looking forward to your 2023 drone speculation video^^
for the 03 and geprc, it's a quick release model to have a drone with the 03 as quickly as possible, but you have to wait, because the propellers in the field is a "don't buy" it's useless unless you have plenty money to spend. because geprc will soon have the opportunity to make a Frame with the propellers out of scope. you have to wait a bit for drones with 03 on board!!!
Another great drone! You are so right about the color! The green is amazing!so cool so many drones are opting for Bluetooth! #stayepic
Nice review. I’ve just bought the frame going build it up myself, went orange though make sure I can find it easier if the worse ever happens
Hi Steve, is this better than the iFlight Nazgul Evoque F6 V2?
Do a comparison video!
+1 Please do it !
Not better, but rather different. The iFLIGHT looks like a million bucks and it is large with 6" props. The MARK 5 is a 5" drone in an X frame, so if you are buying for FREESTYLE, the mark 5 wins. If you are buying for other things, the iFlight wins.
Good review Steve and another good FPV Drone.
Thanks 👍
One more great review my friend with a brutality geprc Mark 5 03 footage it's super cool 😎
Just bought the same drone in orange 🍊 and I love it thank you for a thorough and detailed review. Seeing it operation really helps with the decision making process on the drones and this review made the decision for me thanks a bunch for the videos and the education brother much appreciated!!!
Good point about x frame, I thought with the dji 03 I wouldn't need to add go pro. As usually you good and bad, I truly enjoy your videos
great information and review! this will be my 1st 5" (6s orange version - arrives this week) & seeing this gets me excited.
Enjoy!
another stellar review Steve, God every time i see one of your fpv reviews im sure i want an fpv. you make it look so easy and smooth. then my friends bring me back down to earth by saying you just fly camera drones. to which they are right. I only fly and have one camera drone its a mavic mini flymore combo. when i bought it I thought it was the best thing ever. Now im trying to upgrade to a mini 2 just because i love the size and feel of my original mini but the controller seems so much better on mini 2 and having the lipo batteries means more power. i dont even dream about the mini 3 although ive heard rumors that the price may be dropping to mini 2 prices. Have you heard anything?lol Anyways i digress. my dream is to fly fpv but they tell me its a really hard transition and I dont want to invest a bunch of money just to find out i hate it. I know to most people its not a lot of money but i lost my business with COVID and since then the cost of living has skyrocketed in western Canada. So needless to say, something as simple as $600-900 can make or break me. Do you have any good ideas on the best bang for the buck beginner set-up. Ive asked you before but that was a year or so ago. since then ive been able to save a little money. this rc hobby is my only vice and it keeps me sane.😛
The new Mini 3 is a bit more expensive than the Mini 2, but the mini 2 is dropping in price so things may even out eventually. FPV is difficult for sure but everyone who tried it and stuck with it began at level zero. Unfortunately if you fly DJI drones then it is even harder to learn FPV because the DJI drones are designed for first time pilots where the FPV drones are not. I learned this first hand as I use to only fly DJI drones long ago. Get yourself a BetaFPV Cetus all in one FPV kit and that will slowly get you into the hobby.
@@CAPTAINDRONE798 thanks Cap your the best.
@@sheiladavis2304 get a controller and lift off simulator, that way you'll learn to fly with very minimal costs, I didn't fly in real life until I had put 24 actual hours into the sim
So I'm sure there are plenty out there but I honestly can't find anything for FPV as a sim so I don't destroy the drone I just bought. Is there anywhere I can go to find a good realistic one. I don't mind paying for it as I play games anyways so it'll be another game to me. But as it sits google is a bit empty handed or I just don't know how to find them.
another great review Steve nice fpv fly's well prise a bit much for me but keep them coming. if we don't see you on you tube be for Christmas have a merry Christmas to you all.
And once again a really good video. Good entertainment from the captain.
❤
Excellent Video, Excellent Information, and Excellent Flying. Thank You.
Glad it was helpful!
In my opinion, this design has one defect If we do not use an additional camera
during a collision, the battery may be damaged / cut by the top panel which has a slight step.
This small step has already destroyed several of my batteries.
I love this drone but it's toxic love ;)
Okay I ordered the same exact one 6S and PNP green. I hope it is good. It will be delivered Tuesday and I ordered more accessories also. Two packages of XT60 to XT30 adapters just in case two of the new chargers you reviewed called toolkitRC M7AC two new CNHL 1300mah 6S 22.2V 100C (burst 200C) black series XT60 lipo batteries and 4 CNHL 1500mah 6S lipo 22.2V 100C batteries along with a new Frihobby 5 in 1 drone tool kit. I’m putting my trust in you with this review. Thank you for all your hard work. I will update you.
Bought the Walksnail version of this quad Dec 2022. Current meter burnt out in two flights. No crashes. Geprc support didn't offer a paid shipping label. I paid for shipping from US to China. Quad got lost in the mail after it cleared customs in China. Tracking last ping was Jan 8 23. Geprc support acting like I broke it, I shipped it back, tough luck.
I made a video years ago about AMERICANS that think CHINA operates under the same consumer guidelines. There is NO... "the customer is always right" in CHINA, and there is no "please send it back to us for repair". If ever you receive something like an FPV drone from CHINA and you have an issue... NEVER SEND IT BACK. Instead, identify the problem (usually a flight controller) and ask them to send you the replacement part and 99% of the time they do.
I really enjoy watching your videos! Great looking quad! Happy Holidays!
Happy holidays!
I ordered this one, too. So far all my FPV drones have been based on your recommendations: Cetus X, Pavo25, Cinelog35 V2, Cinelog20, and Mark 5! Hopefully that is all I need! The last three ones are with the O3 system although I still have to manually install the O3 system in the Cinelog 35 V2 (after removing the analog system). Hope I don’t destroy it! Still waiting for the last two to be delivered!
You’ll certainly be impressed with the Mark 5
@@CAPTAINDRONE798 Can I use it with DJI Controller 2 that I got from my DJI FPV combo? I wanna get this Geprc mk5 and use it with my goggles and controller that I got from DJI FPV combo.
I’m sure I can use my DJI goggles v2 with it but I can’t find anything about the controller? 😞
@@NONX01The answer is covered in this video: czcams.com/video/zPf9b-X6cFw/video.htmlsi=0jPHrNdP6Jut4XWt
Finally, I can use DJI FPV Remote
Beautiful bird! I’ve beeen looking at this one! Thanks for the review! Happy holidays
Amazing content. Thanks, it really helps as im just starting to get into the FPV hobby
Glad to help
Being able to get to your rates and stuff via a phone in the field is so good. I dunno why iflight doesn’t implement that coz that is well good.
Thanks for this very informative video,
Glad it was helpful!
Great review and I see they changed the view and some tpu with some nice colors but I can see people who are coming from dji fpv or a DJI Avata want to get into traditional fpv for freestyle or any other stuff they want to do so great review splendid
Another great and thorough review... thanks as always.
Enjoy the weekend
Good evening captain always great review nice drone
Thanks 👍
Great review Steve. The only little observation that I have is that the Flight Controller and the ESC seems to be exactly the same, with exactly the same features. The specs and the name are absolutely the same (and the old one had bluetooth as well, so I think they are the same). The difference might be on the tuning.
oh... The props are also different, so it might be the props as well... or both
Correct. Different Tunining. GEPRC tells me it is an upgrade in several areas, but they were not specific.
can you please add the DJI controller setup with beta flight or speedybee. i dont know how to arm the drone with the controller. not sure what im missing.
You have to set everything up in BETAFLIGHT CONFIGURATOR or use the SPEEDYBEE APP. Go to the MODES TAB and assign the function of the switches.
would you share you pid rate profile for this quad? thankss!!
When I review a new quad, it is always straight of the box with no changes to PIDS/RATES.
Plz compare with Ifight evoque f6d v2
Hey Captain! You’ve spent quite some time on showing how propellers are affecting the footage while using O3 on various settings. Shame you have not mentioned that this exact drone also comes in DC (Dead Cat) configuration which greatly reduces that problem. Thanks for the review tho. I’m FPV newbie and I’m not willing to carry extra cam on it and only relay on O3 system and for that reason I went with a DC configuration. Cheers!
The X vs Deadcat is mentioned many times on my channel, as long as you are a subscriber. When this vid was made, last month, the option of DEADCAT was not available. I get products often before they are launched to the public and the reviews are made early and launched later. The info I have is relevant at that time.
@@CAPTAINDRONE798 that makes sense, thanks. I can’t find frame parts for DC tho - maybe it’s still considered as too new?
One last question: for life I can’t find geprc presets repository address to make it available in my Betaflight configurator in “presets tab”- any idea where that might be? Thank you
@@losien1 If not on the GEPRC website, there is always GITHUB: github.com/search?q=geprc
@4:41 the other option is to get the dead-cat design .. and the props are not in view. Is there anything wrong with that one? Why did you only pick the X-design to review?
X is more balanced. Deadcat is best if you plane to film with the DJI O3.
awsome review captain.
Thank you
Can we use Lion 18650 batteries to do some long range with the 4S model? Wdyt?
Certainly
How this compare with speedybee master v2?
Hey! Its better to buy this drone or speedebee master 5 ??????? Wich one you like more ? Chears
Hi i hope one day you can review ae3 promax drone
I like price really nice set up
Nice! Whats a good PNP/BNF FPV Drone that maybe comes Analog stock, and then i can add my new O3 Air Unit that i already have. It seems i should of just waited to buy a BNF with the O3 already in it but i think its been too long to return it, plus i bought it so that i could use it with my FPV V2 Goggles and RC2 or Frsky RX depending on how it comes and how it feels really.. Then i will get either Crossfire or ELRS i think..
Im looking for that $150-200 fpv drone youre talking about that would be fine for a beginner pilot to basically learn on for as long as it lasts. Because like you said, i probably cant feel the difference between a 150/200$ drone and a 350$ analog version drone like these..
Once i learn and crash a bunch of times, then ill buy the nice fpv drone i want like the iFlight Nazgul F6x. I have only a few hrs of Acro sim time and then maybe 5hr total of fpv flying in Angle mode on a super old analog fpv drone with a FC from 2016 lol, but it worked and deff took some abuse. I basically never hovered in place unless you constantly were adjusting it, but then again it didnt have gps or anything like that just the bare minimum.
Im also not against going diy especially if i can get the nicer frames, but i wouldnt want to build anything smaller than 30x30 in a 5/6". The problem is that i dont know what the name brands are and what arent and whats a good deal and whats overpriced for what it is. I dont mind spend money on better quality but only really as far as better components or more reliability.
Awesome. I think this may be my next one. I LOVE your shirt! Being a drone pilot and a locomotive engineer I need one! Where can I get one?
Is it better than nazgul f5 for freestyle?
Dead cat isn't an option? I'm switching from the evoque by iflight because both of my v2 evoque have caught fire in under like 12 flights.
💚 Great review as always Steve .. could you use a DJI FPV controller with this drone as well as the goggles .. 😀
Yes, you can use the GREY DJI FPV Controller
Hi. What receiver option should be chosen if I want to use dji Remote controller ? ELRS 2.4 G ? I'm new in fpv... Thansk for this review !! A lot of info here :)
If you own the DJI FPV remote 2 controller then you would select PNP DJI O3
@@CAPTAINDRONE798 oh !! PNP stands for Plug & Play , Now I got it. THANK YOU. :)
@@raymundogomez3667 In the Chinese Drone world it is kind of backwards because PLUG AND PLAY means you will PLUG in a receiver. BNF (BIND AND FLY) means the receiver is already present and then you bind to it. So they should list such drones as BNF but they always list them as PNP.
Do you know if I can use my Dji RC3 and my goggles 3 with 6S pnp?
You look cold
HEY STEVE WHAT GOGGLES AND RC DIDNU USE IN THIS VIDEO?! YOUR SO AWESOME LOVE UR CHANNEL
DJI Goggles 2 were used as well as the DJI FPV remote
Really cool footage
i neeed one!!!!!!
You’re very pleasant. Also thanks for your content!!!!!
So nice of you, thanks
This might be the one that gets me over the line - but then I say that on every alternate review.. Thank you for this one - I liked all that I saw and heard. As an aside, do you know if there is an aircraft-style joystick option for controlling drones available?
Would you recommend this over the new Nazgul5 V3 O3 6S HD? I am looking for a good cinematic travel drone, a little bit more powerful (yet not crazy high speed) than the Explorer LR 4 HD DJI O3 Sub250 for my adventure trips. I am also considering the iFlight BOB57 O3 too. Out of the two 5 inches and the BOB57 what do you think would fit perfectly in the travel/cinematic category? new Geprc Mark 5 / Nazgul V3 / BOB57 ?
The NAZGUL and MARK5 are super nice FPV Drones. Way different than your Explorer and way more capable in the FPV hobby (they are not long range but rather true FPV drones). You can't go wrong with either.
@@CAPTAINDRONE798 i actually ended up ordering the iFlight BOB 57 it’s a 6” cinematic long range with freestyle capabilities, and with a 1800 6s lipo it can fly around 9-12mins with a 3000 I can push it to 15-16mins.
Do they make this drone in analogy and out of this GEPRC drone, the Emax Pro or the Iflight Nazgul 5, which would you recommend I get? I don't want to spend a fortune but I want a good fast drone.
The older version may have had analog. This is the HD version. This or the Nazgul are what you want.
Is there no probs in view from the GoPro at any camera angle?
Dunno wether to go for X or Deadcat Mark 5.
Deadcat is what you want if you plan to film using the onboard camera
Hola.....quick question. I wired up an RXSR receiver on my Gep Rc Mark 5 and configured everything on Beta Flight. When I arm the quad and give it a little throttle, the quad jolts, spins (yaw) a couple times, and drops to the ground. Never had this problem, and have no idea. Any advice? As always, appreciate all your help!
Thanks!
Chris
Did you setup your joysticks correctly in Betaflight Configurator? So throttle, roll, pitch, yaw are correct. Props on correct? You have done something wrong or missed a setting, but you’ll eventually figure it out.
Do you know what the User 1 function is in the modes tab for this quad?
Normally it(user 1) is assigned to items like the LED lights or some feature
Hello, I was thinking of getting this drone with the DJI controller 2 and googles 2 . If I understand it correctly , using these goggles and controller with this specific drone with the 03 system the drone doesn't need a receiver to work yes? if I choose the PNP version so to speak?
The follow up question to that would be; If I choose to buy the ELRS receiver to "future proof" the drone, would the drone still work as normal if I connect the DJI stuff to the O3 system that is still within the drone?
Glad I came across your channel and your informative videos !
The answer is. Yes, PNP version will work as long as you watch my video: CAPTAIN DRONE FPV FOR BEGINNERS EPISODE 12
As for ELRS, the answer is… Nope it won’t work unless you know how to correctly adjust the UARTs, etc.
@@CAPTAINDRONE798 Okay I understand! Thank you for the quick answer!
Wich battery need to by?
how did the rbiting drone have no prop noise?
Also, when you do your hover test, is that in acro mode? Or one of the other modes?
Hover tests are usually in ANGLE mode
Thanks for the great review! I am loving the cinebot 30 that I purchased after your recommendation. Just wondering how you would compare this with the DC version and if you think there would be a huge difference in performance especially since I am a low intermediate. Thanks!!
The Mark 5 is designed to be a flippy high speed drone. If that is what you’re into, then add it to your wish list.
I would like to buy a drone to check field’s that I farm . I have never had a drone what would suggest. Thanks
I would go for a DJI mavic, which has a lot longer fly time and GPS
DJI Mini 2
Spettacolo
I am looking to get the MARk5 DC ELRS 2.4ghz version o3 air unit.
Which controller should I buy? Im a noob so still learning the lingos and stuff. I was gonna go with the DJI controller 2 or the TX16s.
If I get theTx16s do I need anything else to be able to fly the drone.
ELERS receiver in a drone means you need an ELRS radio transmitter. So get ANY ELRS radio transmitter.
Will this be a great drone for smooth, slow, cinematic footage with a GP 11 mini?
Not slow footage as it is much too large. Look for a 2” prop drone for that.
Just got the O3 frame for my new build but it doesn't look to have any immortal T antenna mounting. Anyone have any recommendations on adding that or 3d printing that?
I don't know if this was asked already. But would it work on the new DJI Goggles Integra?
Yes
The old model also had bluetooth
Do you know about how fast this drone will fly for chasing fast boats and cars?
I don't know the exact speed but you could count on at least 80 MPH or more.
Apologies to sound like I’m not reading enough but I’m ready to pick up the GepRc MK5, what’s throwing me is it’s asking which receiver I want.
I have DJI goggles and the joypad from my DJI FPV which link straight to the o3 system so why does it give me 3 options of receivers?
Again sorry to sound a little dumb but the drone world is much more detailed than the RC truck world so still many things I’m getting my head around. 🌪️
Have you watched this video from beginning to end… the end tells you what receiver to AVOID: watch my video: CAPTAIN DRONE FPV FOR BEGINNERS EPISODE 12
@@CAPTAINDRONE798 I’ll give it a watch now, iv watched many of yours and find them highly informative but must of missed this one. Thanks buddy! 👌🏼
What do you do with all of your quads when you’re done with them?
I hang onto the ones I like and the others I sell so that I can buy new ones to review.
Hello, I’m wanting to buy my first 5” and I’m in doubt between nazgul evoque and mark5, can you evaluate which one is the best?
There is no BEST drone in the FPV world because it comes down to what the pilot can do. Both of these FPV drones are super good, so go for the one at the lower price.
Why did you pick the X frame over the DC if the o3 was so comparable to the gopro?
Edit: saw your reply that you had an early access model.
Hi Captain, I already have a avata and controller 2 if i want to use the same goggles and controller which receiver option do i have to choose?
You pick the PNP (stands for PLUG AND PLAY) version. Do a search on CZcams for this video so that you understand what is required: CAPTAIN DRONE FPV FOR BEGINNERS EPISODE 12
Nice shirt! Where can I get one of those coexist shirts?
Mine came from the ROTOR RIOT store
The air unit works with the Integra goggles aswell right?
Yes
Hey. Thx for the video.
Maybe someone can answer a few questions for me as I am a newbie.
On the Geprc homepage u can choose different option of this drone (three 4S and three 6S models) what are the differences? As the vary around 50$ in price.
Which batteries are the best to recommend? So between weight & power. So is a 3000 mA battery too big for example?
Thx in advance 🙏🏽
Answers to your questions are: 6s gives longer flight time and more power in tricky situations. Battery should be a 1300 mAh lipo.
Hello! Is the frame compatible with Caddx Vista. I have DJI Goggles 2 which I use with my Pavo20 + DJI O3. But I want to try 5" frame with less expensive VTX from Caddx Vista. Thanks.
They do make an older VISTA model which is extremely good (one of the best)
@@CAPTAINDRONE798Hallo. Can i fly the Geprc Mark 5 with the DJI Googles V2 and the DJI remote Controller 2? Greatings from Germany...
I like it
Isn't it better for prop direction spinning outwards, so that there will be less dust on the camera?
What is the reason Geprc is directing them spinning inwards?
I recall, 10 years ago, spending countless wasted hours on forums debating that. Fun times! Don't loose sleep over it because the answer is.... It doesn't matter.
that quad is really cool looking, too bad it’s not a deadcat
What
There's a dead at version now:)
Good evening
Very cool 🤝🤝😊
Does the O3 heat much? I got one and it heats like almost muilt !!!
The heat is from the video output. It needs to be flying or else it will get hot sitting on the ground plugged in.
Bought a Geprc drone about 2 years ago its never flown even an inch off the ground and Geprc services was useless.. maybe i was just unlucky but I'd never buy 1 again
Yup customer service is a joke, I've been there a couple of times.
U sure u put the props on in the right way? Otherwise it won’t take off.
Do you set mini three to a small circle. If so what distance
Yes, it is in POI tracking mode. Distance is simple whatever looks good on video.
I e never used Fat shark goggles and not sure what they match up with but I have been looking at maybe buying a pair of Dominator Fat Shark. I fly in stick mode 3 and the DJI controller 2. So what setup do you think? I fly with the DJI V2 goggles now also.
Hi Steve. Newish to the hobby. I used the previous mark 5 frame for my build and a speedybee f7 stack. I’m wondering if there’s a way to apply the same tuning to mine?
I’d contact GEPRC to see if the flight controllers and ESC control are the same. If they are, then ask for the DUMP file and you’ll have the same tuning.
I'm curious to know what is the approximate MAX Speed on this drone?
Nice!
Hello, could you give me some advice? Can I fly on Geprc Mark5 on this battery fast and in freestyle mode: GEPRC 6S 1550mAh 60C Battery ? Or must I buy this battery: GEPRC Storm 6S 1300mAh 120C Lipo Battery? Thank you for answer.
The 1550 will let you fly longer and will take much of the top space of the drone. The 1300 is designed for freestyle and short flights.
@@CAPTAINDRONE798 Thank you very much for answer
Thanks for the review! What are you using to attach the gopro to the mount? I know there’s the long screw that goes through the gopro mount and through the “legs” of the 11 mini, are you then just using a random bolt on the other side that screws into the long screw?
For FPV drones and full size or mini GoPros, I either use a bolt, or I just use a GoPro mount and zip tie it to the drone.