Scag Tiger Cub Engine Swap Kawasaki to Kohler

Sdílet
Vložit
  • čas přidán 4. 09. 2023
  • Scag Tiger Cub Engine Swap Kawasaki to Kohler is fairly easy just time consuming.
    ---------------------------------------------------------------------------------------
    Amazon Store
    www.amazon.com/shop/marksmisf...
    -----------------------------------------------------------------------------------------------------------------------------------
    If you like this video and would like to see others like it please subscribe and check
    -----------------------------------------------------------------------------------------------------------
    #scagengineswap #kohlervskawasaki #clutchremoval
  • Zábava

Komentáře • 27

  • @philliphall5198
    @philliphall5198 Před 7 dny +1

    All my business customers who are in lawn maintenance have a fire extinguisher on all their zero turns
    Which is very smart after one burns up😊

  • @JsCrazyCutzLLC
    @JsCrazyCutzLLC Před 3 měsíci +1

    Made that look easy! Nice job 👍 Ive got that same jack 😉☝️

  • @msclecarcrzy
    @msclecarcrzy Před 10 měsíci

    Thanks Mark & Vicki! Mark you can work on anything. Good job!

  • @ftowles2001
    @ftowles2001 Před 10 měsíci

    Looks like your trailer had some plywood in the back. I put three pieces of treated in my open trailer last weekend. Almost lost my cookies at $154 for three 3/4" sheets of pressure treated plywood! Might last a few more years!
    Mower troubles! Been having those too. My ZT2800 transaxles broke from the frame of my ztxl42 when I hit a big whole covered up with overgrown grass! Three shop visits later its fixed. One welder shop visit, two back to the dealer for a total of $841 dollars and I am back to smooth baby but cuts with it. Wish I could turn a wrench like Mark. Could have save so much money. At least its fixed now and has with impeller bagging. A new setup would have cost close to $8.5K.
    Ya'll keep mowing and putting out those inspirational vidjos :) Thanks

  • @JoseEstrada-ig6fg
    @JoseEstrada-ig6fg Před 6 dny +1

    I have a tiger cub stc48-19kai could i change engine and something similar to what you just did ?

  • @markstanfield4345
    @markstanfield4345 Před 10 měsíci

    Good job ! Sure runs smoothly and can't beat the cut quality.

  • @joshuagraden7606
    @joshuagraden7606 Před 2 měsíci +2

    What is the shaft size can I get any old motor under 25hp that will fit and put it on?

  • @Deested
    @Deested Před 10 měsíci

    Awesome work!

  • @chuckgilbert2035
    @chuckgilbert2035 Před 2 měsíci +1

    Watched your channels over the winter and rebuilt a Tiger Cub. First cut this week and I am in love with this thing. Cut the time in half from using my Freedom Z. Both with the 48" deck. I also have highly modified the Cub. Check it out Mark. You will like what I have done with it. Have the neighborhood wanting me to cut their grass now.

  • @rvrebuild
    @rvrebuild Před 9 měsíci +2

    I swap one of these a few years back to a 26hp kohler command. Mine had a 19hp kawasaki i bought a muffler for mine cost around 200 amd put reaper rear tires on it. I love mine best mowers they make in my opinion

  • @19MarkDavid
    @19MarkDavid Před 5 měsíci +1

    And the best part about this video-other than Vicki- Mark is barefoot. Nice....

  • @bigsonslawncare
    @bigsonslawncare Před 3 měsíci +1

    This was cool 😎👍🏾

  • @juliusjackson9534
    @juliusjackson9534 Před měsícem +1

    Like that 😊
    😊

  • @d.s.mclaughlin3461
    @d.s.mclaughlin3461 Před 8 měsíci

    I'll be swapping a Kohler sv840 dead @ 270 hrs to a Kawasaki.
    Good luck with that Kohler!!

  • @midlander3760
    @midlander3760 Před 28 dny

    Watch your channel because I have a Tiger Cub. Recently had to replace the PTO clutch. I didn't hear you say why you had to swap out the motor? Did it die on you, and if so, how many hours did you have on it before that happened.

    • @vickisoutdoors_
      @vickisoutdoors_  Před 27 dny +1

      The engine blew it was tired with 1800 hours.

    • @midlander3760
      @midlander3760 Před 19 dny +2

      @@vickisoutdoors_ Thanks for the info. Mine only has about 650 hours so was just curious how much life I should expect to get from it. I had to remove/clean the carb this past week as it started surging the last time I mowed. Cleaning out carb fixed issue. I first replaced the fuel filter (NAPA part no. SME702390). It is exactly the same size as OEM and is rated at 15 microns so wanted to mention that to any of your subscribers that might be looking for an awesome replacement fuel filter minus the Scag price!

  • @im-that-guy-pal
    @im-that-guy-pal Před 5 měsíci

    Those welds though......😮

    • @midlander3760
      @midlander3760 Před 28 dny

      HA, I was thinking the same thing, but as long as they are solid. 🙂

  • @graceortiz9494
    @graceortiz9494 Před 10 měsíci

    What's the cost of a new motor as apposed to a new mower?

    • @vickisoutdoors_
      @vickisoutdoors_  Před 10 měsíci +1

      We bought the (used motor) for $600 brand new zero turns about $6-7 k Also the time to do the work he’s got about 12 hours at least into that repair

    • @philliphall5198
      @philliphall5198 Před 7 dny

      Really it’s best to go with a new engine or good use one if fram and deck in fairly good shape 😊