So I'm about 1 minute into ur video and brush.. I must say I haven't heard a thing u said , I'm soooo focused on how sweet those cabinets are.. I love the light placement..😍🇹🇹
Helpful video guys. One bit to add, pressure test everything and the connections before coiling up hose on the reel so it’s easier to see if the inner connection or anything else leaks. Also since I’m sure other will notice, if you swapped your wrenches for the handle install that fancy sonic ratcheting wrench would have made short work of the nut for the handle. I’m not sure why the plastic handle has so much side to side slop in it, but some plastic washers or 3D printing and it comes together awesome (I chose the latter with some black filament). Can provide the source file or print for a small fee if anyone is interested. Keep up the great work!
My hose has no swivel at either end. Can I still mount it on the reel? I realize that I will have to turn the hose when I screw it in but will it then be a problem to operate the reel?
any reason when buying these kits why there is a quick disconnect on both side of the hoses? A Included adapter would be nice or take it off on the swivel side.
Thanks ! very helpful , Question is the Mjjc foam cannon connecting to OG mosmatic sprayer gun? and can you install with shipping i dont like to build by my own
Is it normal for the reel to move back and forth as if it has play. When reeling the hose the Cox reel moves back and forth more so on the side with the handle.
Its normal for there to be a little play but if you thing yours is more then normal I would send a video to out instagram page and they can tell yours is okay.
Yes, I would recommend taking one of the couplers off. It's going to be very tight so you might even want to watch our video we did about "terminating a high pressure hose"
I just got my Og spec v1.0 hose today ultimate kit 100’ and there is “NO END” that is swiveling. I took off my kobrajet grey non marking and it swivels instantly. Super disappointed how can I reach out for help I tried looking on the site
I would recommend putting the hose on after wall mounting or you'll just be fighting to hold the entire thing up. Also, the reel itself dose not come with mounting screws. If you got the stainless mount it will come with screws.
No idea why people think they would or should including mounting hardware. They don't come with mounting hardware because they have no idea where or how you are going to mount it. If they had to include hardware for every possible mounting location or situatoion, we'd have to pay $50 more, then only use 10% of the included mounting hardware.
Wrong! Everyone starts somewhere sir, don’t degrade people’s intelligence over something so silly. I had a new guy at my primary job come on with no knowledge of mechanics, now he is one of my go to guys for maintenance and basic tasks. Everyone starts somewhere
So I'm about 1 minute into ur video and brush.. I must say I haven't heard a thing u said , I'm soooo focused on how sweet those cabinets are.. I love the light placement..😍🇹🇹
Great instructions, bro! You're the best!
Helpful video guys.
One bit to add, pressure test everything and the connections before coiling up hose on the reel so it’s easier to see if the inner connection or anything else leaks.
Also since I’m sure other will notice, if you swapped your wrenches for the handle install that fancy sonic ratcheting wrench would have made short work of the nut for the handle. I’m not sure why the plastic handle has so much side to side slop in it, but some plastic washers or 3D printing and it comes together awesome (I chose the latter with some black filament). Can provide the source file or print for a small fee if anyone is interested.
Keep up the great work!
LOL, you read my mind. I was going to post the same about leak checks before coiling and the ratchet wrench.
Very informative. Thanks
I’d like one for 5/8” flexzilla garden hose. Do they make one for that? Alls I can find is high pressure.
My hose has no swivel at either end. Can I still mount it on the reel? I realize that I will have to turn the hose when I screw it in but will it then be a problem to operate the reel?
any reason when buying these kits why there is a quick disconnect on both side of the hoses? A Included adapter would be nice or take it off on the swivel side.
Because most hoses are used to connect a pressure washer (with a QD adapter intalled) to a short gun or wand (with a QD adapter).
Thanks ! very helpful , Question is the Mjjc foam cannon connecting to OG mosmatic sprayer gun? and can you install with shipping i dont like to build by my own
Man I guess I’m not keeping up with the jones family because these reels are 2-350 dollars.
Can I install my Uberflex hose with m22 on a hose reel??
There is a way to do that but it's a little complex. I would Reach out to support@obsessedgarage.com on that one.
Did you ever figure it out?
Is it normal for the reel to move back and forth as if it has play. When reeling the hose the Cox reel moves back and forth more so on the side with the handle.
Its normal for there to be a little play but if you thing yours is more then normal I would send a video to out instagram page and they can tell yours is okay.
I have the hose with a quick connect on both sides. It’s on really tight. Is it safe to unscrew it, so I can use it for the inside of the reel?
Yes, I would recommend taking one of the couplers off. It's going to be very tight so you might even want to watch our video we did about "terminating a high pressure hose"
I have been trying to get the coupler off for a while now I finally gave up. It's too tight.
Hey I purchase cox reel but is 1/2 and my hose is 1/4 what I’m supposed to do for adapter it ?
I don’t how you use a 24mm, mine was not a 24mm but a 22mm. I bough a 24 mm and it was definitely too big.
Might be a difference in the kobrajet hoses vs the newer OG ones? My kobrajet hose is 22mm as well.
I just got my Og spec v1.0 hose today ultimate kit 100’ and there is “NO END” that is swiveling. I took off my kobrajet grey non marking and it swivels instantly. Super disappointed how can I reach out for help I tried looking on the site
Email support@obsessedgarage.com, and they will take care of you!
Was this a 100 foot or 75 foot hose?
That was a 100' hose.
This is done before mounting it to the wall or after? My kit did not come with mounting screws.
I would recommend putting the hose on after wall mounting or you'll just be fighting to hold the entire thing up. Also, the reel itself dose not come with mounting screws. If you got the stainless mount it will come with screws.
No idea why people think they would or should including mounting hardware. They don't come with mounting hardware because they have no idea where or how you are going to mount it. If they had to include hardware for every possible mounting location or situatoion, we'd have to pay $50 more, then only use 10% of the included mounting hardware.
What reel and how much hose is that on it
That is the Cox Reel; you can find a link to it in the Description. It can hold up to 100' of hose.
I did Russian tight or 3 ugga duggas, lol
Anyone who need to learn how to assemble something so basic, should never let anywhere near high pressure water!
Gotta go with you on this one, hoss.
Wrong! Everyone starts somewhere sir, don’t degrade people’s intelligence over something so silly. I had a new guy at my primary job come on with no knowledge of mechanics, now he is one of my go to guys for maintenance and basic tasks.
Everyone starts somewhere