Video

Mike, thanks for all the great instructions /tips. Quick question - I’m about to invest in Milwaukee Furl impact driver and drill. For this work , do you suggest the M18 or M12. Does the M12 have enough power ? Thanks. Owen from Atlanta

how often would you use a iron remover and when you do use it where in the wash process is it used? Thanks

Man so many channels have jacked your set up 😂

Very informative. Thanks

Can you omit buffing off the OG tire dressing for a shinier finish or will it sling?

Will these work with other guns or only the OG spec one? Thanks

Is there any reason not to use an M22 to 1/4" QD on the gun-wand connection (instead of the 3/8")? That way my snow cannon with 1/4" QD can fit on the end of the gun without adaptors?

Great instructions, bro! You're the best!

Please help me. I bought a mckillans swivel pressure washer gun. It has a 3/8 swivel inlet. My hose is a 1/4 inch so I can’t use my new gun. Is there a 1/4 inch swap out fitting for the mckillians swivel gun? ( also the pressure washer outlet is 1/4 inch otherwise I’d just buy a new 3/8 hose)

My 2016 truck was repainted three years ago and the paint is in great shape with no swirls but just a couple of moderate scratches and no dents (knock wood). If I use compound to buff out those scratches, do I need to compound the entire vehicle before polishing and waxing? My challenge is the small time windows provided by Colorado's hot summer weather (with unforecasted light rain bursts in the afternoon), and the fact that my truck doesn't fit in my garage. Would greatly appreciate your advice!

Love the curve ball

I watched this video to learn the measurements of the GHT thread. I want to know the major diameter of the thread and the thread pitch as well as the thread profile. You did not explain any of that. You use improper terms such as O-ring. It’s not an o-ring. It’s a flat ring. Also, you said, tighten up. You should say tighten. There is no up in tightening a fitting. It appears you like swinging your arms when you talk.

Hi, What pressure washer would you recommend for a 4500 watt champion generator? I have the 2.3 and if trips so often I’m ready to part ways with it for mobile detailing.

I would like to know your opinion on Powerplay pressure washers. They have several product lines such as Mini, Pulse, or Pro. Have you ever tested them?

So can I use it as a stand alone product ? I’ve used coating about 10 times but don’t like it , makes me nervous if I get a high spot

so would it be recommended to buy a different cleaner for tinted windows?

“You know” #256😂

How do you remove a broken quick disconnect from the pressure washer extention pole? Do you put the pole in the table vise to be able to “unscrew” the entire QD to add a new one? Concerned the metal pole will bend when trying to twist off broken pole.

Have you compared this speaker to the Zeppelin AirPlay 240W? Which one sounds better in your opinion?

I wonder how it compares to Zeppelin AirPlay 240W? 

So you sell a bunch of parts that don't fit, and the is a rebranded vacuumaid unit that costs double the price....

I ordered this hose, and I must say packaging was great with no bendable kinks and shipping was pretty dam fast so I'm very happy with my purchase from OG. Thanks

Does the European style tap have an adapter to make the opening diameter smaller?

I went to Banks Vacuums - they have these exact attachments for much cheaper - the manufacturer of most of these is Wessel Werk... for this reason, I will never buy any products from you seeing that you are willing to price gouge so viscously.

what kind of spray bottle is that?

when you expect to have these back in stock?

My hose has no swivel at either end. Can I still mount it on the reel? I realize that I will have to turn the hose when I screw it in but will it then be a problem to operate the reel?

Can you use the OG gun with MTM QD?

Looks like the same shade as Dawn

Matt, has anyone developed a stainless live ball swivel joint fitting? Imagine how sweet that would be to have full rotation not just horizontal. If you develop it can I get a sticker and promo code 😂

Great video! I’m interested in your thoughts on the best electric pressure washer that would be ideal for a six nozzle water broom? I agree flow would be a concern. Our condo building washes the parking garage yearly and our gas pressure unit will be sold. We want to switch to electric to avoid gas fumes and be able to wash with garage door closed. Any ideas?

I recently brought a Kobrajet hose and it came with SS fittings, I purchased the Mosmatic T304 QDs and fittings from you guys offer and planned to change it, but the current QDs are so tight and maybe they have put adhesive sealant on it. I am wondering do you have some tips on how to removed those? Or worst case scenario can I use MTM QD with the OG Spec Mosmatic gun I have?

Can Ultra clay scrubber wash and re-use it?

You need to make your mind up. First you say you use the compact the least of all then you claim you use the high toque version the least of all. So which is it?

is the clay lube/waterless wash and the rinseless wash ph neatrual or whats the ph of those 2?

When did the redesign happen? I have the original 1322TS. Is there a difference other than looks? Do I need to replace the red cap with the newer style dip stick?

I was/am currently using water dragon fittings for my 3/8 hose stuff, why? i don't know maybe because i was uneducated. Those crappy, irritating, useless ends have caused me 2yrs of frustration. On my 4k psi simpson machine those pos male ends will dent up so fast, like 5 minutes from the bearings inside the female coupler. Then i cant get my wand, surface washer, whatever separated without using a channel locks and a hammer. The indents on the male fitting get so large the ball bearings wont slip over the fitting now. Moving on to today. I ordered general fittings because people have told me they last at least a year or so. Which is a lot longer than 5 minutes to me. I got them in the mail last week $175 in parts and I notice one side of the fittings say General but the opposite side say China. Whats your opinion on that, the china part? Did i just buy junk again? Moving on to just now. I just heard you say Mosmatic. I didn't know they make/sell fitting. I'm going to go to your store and check them out. Besides the fact your selling them do you think they are far superior than General? I haven't installed my Generals yet so i can't compare. But what i am sick and tired of is every time i want to change to a wand or a surface cleaner or use the D10 to blow clean surfaces after cleaning it take about 5 minutes between tooling because those water dragon ends have to be the worst things i ever purchased.

Thanks 🫡

Considering a Active 2.3 pressure washer, it would fall right between 4.0 and 4.5 nozzle size at 1,100 psi and 2.3 GPM. Which one of them would you recommend? Thank you!

You only added a sliver of pearl silver infront of the black cabinets I would have had a minimum of at least 1 full tile. In front of the garage door in the far end of the garage perhaps 1 less row in front of the garage door would have worked with one extra row to the rear of the car so you had the 1 full silver tike in front of the black cabinets

What size orifice do you use in the foam canon please?

Can this be used on aluminium parts.

I get a kick out of your shop. Do you eat off the floor? I remember when people got greasy in their shops.

Would you recommend this over the Griot's Garage Interior Cleaner?

Superb vid. Thank you!!

My 7.5aHr (1st gen) battery died with 10 days on the 3yr warranty. I got a solid red light on the quick charger and a rapidly flashing amber light after pressing the button for 5 seconds (indicates over temp condition). I'm in Ohio and might charge my battery 2x/wk in our 7-8 month mowing season. My battery should have lasted 4+years, but didn't make it to 3. Yes, it is being warrantied because I registered my mower purchase.

I would love to see a color between Pearl Silver and Pearl Grey.

Just got my ultimate bundle and all I can say is the OG folks are absolute legends. Well done.

Thanks!

Hi. I'm debating getting an EGO combo string trimmer and edger with the power head. It looks like it comes with the basic charger and the 4.0Ah battery. My question is, what's the best way to get the most longevity out of the EGO batteries? I've seen videos saying to not let them charge to 100%, or take them off the charger after they charge, etc. I guess there's a lot of opinions. I'd rather not buy an expensive battery prematurely. So what's your take on battery maintenance to get the battery to last as long as possible. Thanks, Matt