Fluid Film 8 Year Test and Review

Sdílet
Vložit
  • čas přidán 28. 08. 2024
  • 8 Salty winters and no rust thanks to Fluid Film Undercoating.
    Purchase Fluid Film Cans Here ► amzn.to/3QUbyoX
    Purchase Power Washer Here ► amzn.to/3yuCfKn
    Purchase Fluid Film Sprayer Here ► amzn.to/4bpp0JB
    Commissions from sales financially support creators like myself, thank you!

Komentáře • 20

  • @stonepa
    @stonepa Před 2 měsíci

    I never wash off the old Fluid Film. I just coat the older dirty fluid film with new FF each fall.. Keeps my old Toyota Land Cruiser rust free even here in the rust belt.

  • @przemekkobel4874
    @przemekkobel4874 Před 3 měsíci

    I managed to halve the cost by buying larger cans of some dense FF variant, and thin it with petroleum spirits. Don't have a garage or compressor, so I use a 3D printed Venturi sprayer mounted on a small cordless blower. The thing has over 1,5 m of range, and seems like a perfect tool for closed profiles as well. Also, there are coatings that are dry to the touch, but never completely dry, and they work with FF (like a paint on primer).
    BTW, other "downside" of FF is that it loosens hard layers of rust, so it sometimes turns OK-ish surfaces into holes. This is actually a good thing, but you can't wait with fixes anymore.

  • @LiamG903
    @LiamG903 Před 2 měsíci

    Great video, I tried fluid film and is was decent but corosion block is the best I've used. Been using it for 20 years. It's made by Lear chemical sonif you have heard of acf 50 same company just a little thicker. I have a log splitter that sits outside all year long in Canada and 10 years later it still looks brand new. Give it a shot

  • @LowkeyAkuto
    @LowkeyAkuto Před 18 dny +1

    I love the fluid film Videos and have been watching since year 2, I keep coming back every year lol.
    when you apply if for the winter, do you wash your car throughout the winter? I find myself having to reapply in the suspension/wheel well areas. Should I stay away from my wheels when washing the exterior? Or keep washing?

    • @KurtofTrades
      @KurtofTrades  Před 18 dny +1

      I don’t wash mine at all in the winter, it only helps remove it faster.

    • @KurtofTrades
      @KurtofTrades  Před 18 dny +1

      Washing the exterior is fine though

  • @jparker1823
    @jparker1823 Před 5 dny +1

    Have you Fluidfilmed inside the bottom of your doors? I've seen cars 5+ years start to rust from the inside out.

  • @lptomtom
    @lptomtom Před 3 měsíci +1

    Do you have to clean it after each winter, or do you just do it for the video? The results are impressive, congrats on taking such good care of your car!

    • @KurtofTrades
      @KurtofTrades  Před 3 měsíci

      This is the first time I’ve ever power washed the underside, usually I just apply the next years coat over the top. Thanks!

  • @jasoncharles6980
    @jasoncharles6980 Před 3 měsíci +2

    I do like your content - but I have to disagree on Fluid Film. Great product but Blaster Surface Shield is the better choice.

    • @KurtofTrades
      @KurtofTrades  Před 3 měsíci +2

      I’m not as big a fan of it, it hardens way too much imo. I don’t think it’s bad just not as good as FF. Thanks!

    • @jasoncharles6980
      @jasoncharles6980 Před 3 měsíci +1

      @@KurtofTrades That’s where I disagree. In my experience it doesn’t harden at all. Looks and acts just like fluid film but doesn’t wash off as easily. I did some tests with bare metal - I wish I could send you pics. Not saying FF is bad, I’ve just found SS to be better, especially when going over existing rust. I may even try doing a half and half mix of the two - Fluid Film Black mixed with Surface Shield (I spray with a compressor). We shall see.

    • @martinmorris6271
      @martinmorris6271 Před 3 měsíci +2

      Can’t wait to see year 10

    • @rgemail
      @rgemail Před 3 měsíci

      As I recall Surface Shield did test better in another channel's long-term review ..cant remember which channel but he's prominent and testing rust proofing products is like his entire channel. It makes sense considering how much thicker SS goes on - and stays. It doesn't harden, as I can attest from spraying my car last year. It may be the case that fluid film is better for inside doors and places that won't get water/grime sprayed.

  • @charliesullivan4304
    @charliesullivan4304 Před 3 měsíci +1

    Great video and great advice. Ive heard different things about whether you should keep it away from brakes, or just don't worry about it and count on it burning off fnsone grts on the rotors. What's your take on that?

    • @KurtofTrades
      @KurtofTrades  Před 3 měsíci +1

      Thanks! I usually don’t spray the brake area or exhaust directly. It will burn off, but I wouldn’t want to gum up the brake pads. It’s probably fine either way though.

  • @b18c5turbogt35r
    @b18c5turbogt35r Před 3 dny +1

    do i need to water off the salt under my car before reaplly fiuld film

    • @KurtofTrades
      @KurtofTrades  Před 3 dny

      It’s a good idea but not necessary

    • @b18c5turbogt35r
      @b18c5turbogt35r Před 3 dny

      @@KurtofTrades because i take my car to a place to does the fiuld film under coating for me and they do also offer wash under car to get most of the salt off form last winter but it will cost me a extra 40 so is it worth it to do than also