Cleaning The Inside Of Your Minolta AF Lens

Sdílet
Vložit
  • čas přidán 9. 04. 2021
  • We will disassemble the lens to clean aperture blades and internal lenses, as well as regrease the auto-focus gear.
    In this video, you will learn how to disassemble the Minolta AF Maxxum Lens.
    Thanks for supporting these videos!
    Buy me a coffee - www.buymeacoffee.com/photoand...
    Subscribe: / @photographyandmore
    Don’t forget to like this video and subscribe to this channel, and be sure to check out the rest of my photography tutorials.
  • Jak na to + styl

Komentáře • 31

  • @flightographist
    @flightographist Před 10 měsíci

    The addition of the overhead led's really elevated this to fine art, thx for the experience!

  • @alexisbagalacsa1199
    @alexisbagalacsa1199 Před 3 lety +4

    Very detailed! Keep making videos! Love it

  • @k-ozdragon
    @k-ozdragon Před rokem +5

    Important tip: wipe *with* the edges of the aperture blades, not against them! For example, the front should be wiped by going counter clockwise. This prevents damage to the aperture blades. You can gently pull vertically against the edge of the blades to get any stuck oil. Also, partially opening the blades will reveal other areas you can't reach with them fully closed.
    Also, *never* clean your lens with alcohol. It can haze or completely remove coatings. I found this out the hard way. Use lens cleaning fluid designed for camera lenses. You'll also want to blow off each lens before assembly, otherwise dust will get into the lens.

    • @samsen3965
      @samsen3965 Před rokem +1

      Good advice. However, isn't the commercial lens cleaning solution the same as concentrated isopropyl alcohol?

    • @k-ozdragon
      @k-ozdragon Před rokem +3

      @@samsen3965 No, it's diluted a bit. I also thought the same thing & was just using alcohol. It damaged my coatings. Especially if you are using it for lens repair, as the inner lens coatings are not nearly robust as the outer coatings are. Full strength alcohol can remove coatings, or cause them to haze up. Both of which are unable to be repaired.
      Also, *NEVER* use alcohol or lens cleaner on your focusing screen! That will immediately "craze" the micro plastic, making it hazy. Only use distilled water & cleaning q-tips (or microfiber cleaning tips) on your focusing screen. It's super sensitive & easily damaged.

    • @k-ozdragon
      @k-ozdragon Před rokem +1

      @@samsen3965 I also did look up camera lens cleaner, & the professional stuff doesn't contain alcohol or ammonia. Some cheaper eye glass lens cleaner does have alcohol, but you can find warnings all over the internet to not use this stuff, even on eye glasses. Canon's own lens care says to never use alcohol based cleansers. So definitely be careful what you use. I think alcohol is OK in most instances if diluted to 15% or less, but you may not want to learn the hard way on an expensive lens. Thankfully I haven't damaged any new lenses, but I did mess up one cheaper vintage lens. That was using full strength alcohol before I knew better.
      You can only use full strength to break down oils on aperture blades, like in this video. It is very time consuming to do properly without removing the aperture completely; but useful in instances where full disassembly is complicated. Just be sure that the q-tip isn't overly saturated, as it will drip onto the lens below. I dip the q-tip in alcohol, then gently touch it to a dry paper towel. This wicks up any excess alcohol from the q-tip so it won't drip.

    • @samsen3965
      @samsen3965 Před rokem

      @@k-ozdragon 🙏🏻

    • @miguelitodebelgrado4260
      @miguelitodebelgrado4260 Před 10 měsíci

      Hello, would you be so kind to tell us on which lens alcohol destroyed coatings?Thanks in advance.

  • @matthewchen1006
    @matthewchen1006 Před rokem

    Verydetailed , very helpful! Thank you so much!!!!

  • @afrikabb
    @afrikabb Před 2 lety +1

    Great, it helped a lot. You saved my day

  • @alexisbagalacsa1199
    @alexisbagalacsa1199 Před 3 lety

    Keep making videos. Can't wait to watch another one. Thanks!

    • @photographyandmore
      @photographyandmore  Před 3 lety +1

      Hello Alexis,
      Thanks for your comments!
      That encourage me to keep going!

  • @vieshus
    @vieshus Před 2 lety

    Thanks! It realy helped.

  • @tomik7696
    @tomik7696 Před rokem

    Thank you :) Dziekuje

  • @michalisf1955
    @michalisf1955 Před rokem

    Thank you for uploading this video. Very interesting! One question...why didn’t you remove the oil from the plastic ring of the front element and its “nest” inside the lens? Wouldn’t that cause the aperture to get stuck again?

  • @williamkirby3550
    @williamkirby3550 Před 3 lety +1

    Great video, would this procedure be the same on a minolta 35mm-70mm f4 zoom? Cheers

    • @photographyandmore
      @photographyandmore  Před 3 lety

      Hello William;
      I do not know if your lens disassemble in the same way as this lens.
      Hopefully someone from the community can guide us in this regard.

  • @machia0705
    @machia0705 Před 3 lety +1

    My old Rokkor lenses need a tune-up:
    28mm 35mm 45mm 58mm f1.4 85mm f1.7 35-70mm 135mm
    Thanks!

    • @photographyandmore
      @photographyandmore  Před 3 lety +1

      Hello Machia0705,
      Thanks for your comments and thanks for watch my videos!

    • @machia0705
      @machia0705 Před 3 lety +1

      @@photographyandmore
      I cleaned the 7 lenses today.
      Presentation was excellent, clear and concise.
      Thanks from New Jersey.

    • @photographyandmore
      @photographyandmore  Před 3 lety +1

      @@machia0705 I am very happy to know that you found the video useful!
      If you have not subscribed yet, I invite you to do so to see more videos like this!

  • @osolemio1942
    @osolemio1942 Před rokem

    Thank you so much ! Question : No auto focus and aperture blade motor inside ?

    • @davidpelayo
      @davidpelayo Před 6 měsíci

      camera driven autofocus and aperture

  • @peritojonatas
    @peritojonatas Před rokem

    Can you unscrew the front element without removing the back one first? Say for example I only needed to clean the inside of the front element... Thanks in advance!

  • @KevKev1619
    @KevKev1619 Před rokem

    I have a 85mm Minolta AF and looks similar as the back part, I have dust inside to the lense but no oily looking on the blades.. do I just clean the lense inside from the front of it? I did a review of them using my A6000

    • @AbulaSyllabus
      @AbulaSyllabus Před 7 měsíci

      If it ain't broken, don't fix it. I'd clean all dust and focus on that only, if that's your current problem.

  • @7667neko
    @7667neko Před 2 lety +1

    Thanks, it helped!