Fixing Akai Tape Loading Issues: Mechanical Repair Guide
Vložit
- čas přidán 11. 09. 2024
- Struggling with your Akai deck not loading tapes automatically? In this detailed guide, I'll explain how to adjust the mechanical components to fix the tape loading issues. Follow along to restore your Akai deck's automatic tape loading feature and enjoy seamless playback.
🔧 Mechanical Adjustment Guide:
Diagnosing the Issue: Learn how to identify the root cause of the tape loading problem in your Akai deck, with a focus on the reduced torque from the mode motor, which struggles to apply enough force to pull the tape in.
Adjusting Record Protection and Tape Type Sensors: Discover how to adjust the record protection and tape type sensors to ensure they function correctly and do not interfere with the tape loading process.
Inspecting and Cleaning: Understand the importance of inspecting and cleaning key parts, including the sensors and loading mechanism, to ensure smooth operation.
Reassembly and Testing: Get detailed instructions on reassembling the deck and testing the automatic tape loading feature to ensure the adjustments were successful.
🎥 Visual and Practical Tips:
Hands-On Demonstration: Watch a hands-on demonstration of each adjustment step, providing visual guidance to complement the instructions.
Pro Tips: Gain practical tips and tricks to make the adjustment process easier and more effective.
👂 Share Your Experiences:
Join the Conversation: Have you encountered similar issues with your Akai deck? Share your experiences and adjustment tips in the comments below!
Don't let tape loading issues hinder your enjoyment of your Akai deck. Follow this comprehensive guide to adjust the mechanics and get back to enjoying your favorite tapes. Like, share, and subscribe for more adjustment guides and vintage audio restoration tips.
🔍 Tags: #AkaiTapeDeck #MechanicalAdjustment #TapeLoadingIssue #VintageAudio #AudioRestoration #DIYAdjustment
Another fine video and repair by the Master
The looseness of the door comes from a worn "collar" (Ref. No. 2-63), and the cassette gets stuck when entering because the force of the "plate cassette holder" (Ref. No. 2-26) cannot oppose the force provided by the other cassette holder ( Ref. No. 2-60). The reference numbers are part of the mechanical block on page 14-15 of the manual that I have. :)
I have thought about this. I understand that Slide Eject 2-61 is late on the timing chain and should pull clutch 2-18 a bit earlier. The cassette shell gets jammed by the heads before it gets into place.
@@hifirulezzz Unfortunately, there are several parts that move each other and are mutually dependent... The first thing I would check is 3-13 (picture on the next page with the motor block), over time the elasticity of that part increases, the upper and lower "tab" is a bit too wide while moving though they look perfect when stationary. They usually help to shrink/squeeze a little towards the axis.
I've seen the screw that holds it loosen a bit and the whole part is loose, but that's rare.
Since you are actively involved in servicing, compare it with a well-behaved mechanism, it might give you an idea of what the problem is. :) Happy hunting :)