How to pair the Haloview wireless backup camera MC7101 2 with 2 cameras

Note:
1.Please DO pair the monitor to the camera before install the camera. The pairing must be completed within 30 seconds, otherwise it will enter low power state, then the pairing button won't work.pls re-power the camera for pairing.
How to pair the wireless system with 2/3/4 cameras:
1). If there is image in the first channel (CAM1),this channel doesn‘’t need to be paired. Press the “SEL” button to switch to the second channel (CAM2), press the “Ok” button for 5 seconds, and the “50 seconds” pair countdown will appear. At this point, immediately power on the other camera, so that the second channel can be paired.
2). The other two channels (CAM3, CAM4) are also pair in the above way.
3). After the camera enters low power state, the infrared light does not work in a dark environment.
2. Pls do power the camera at the pre-installed position to test the signal before drilling. Do not drill until the signal reaches 4 grids.
3.Insatll the camera close to the roof and move the camera's antenna a little outward, the antenna cling to metal will affect the signal. Please do contact us immediately(with photos will be perfect),no matter where you bought it.We will reply within minutes during working time.
4.Haloview's rear view system use anti-glare screen,please tear off the monitor's screen protection film which may cause reflection after installation.
www.haloview.com/haloview-mc7...
www.haloview.com/affiliate-pr...