SQUARE BEZEL - HOW TO SET A SQUARE SHAPED AQUAMARINE - THE DIAMOND SETTER - 60 MINUTES STONESETTING
Vložit
- čas přidán 15. 06. 2023
- THIS 18KT GOLD RING GOT A BRAND NEW BEZEL.
The old one was worn out and I knew it was just a question of time when the stone will fall out.
INSTAGRAM ► / thediamondsetter
After a ver long (busy) time without creating new content I'm proud to share this NEW VIDEO with all of you!
I've racked my head - Not only because the video is so long, but also because I wasn't sure how to edit the video.
In the end I just thought to myself - KEEP IT SIMPLE.
Except for 3 or 4 video cuts, the video is unabridged and unadulterated.
EVERY step is visible, every movement is visible, every "secret" is visible.
You decide what to watch and where to fast forward.
This setting technique is the product of many many years.
With this technique you are able to set any gemstone you like. No pressure against the girdle or the thinnest parts of the stone. The material gets slowly moved over the upper facets of the stone.
Observe the angle of the bezel when starting, where to start and so on.
60 MINUTES PURE STONESETTING
ENJOY
Special THX to the whole JURA - FAMILY.
JURA motivated me back then to teach myself.
You were friendly and down to earth and never got tired of answering my questions. Without the amazing inventions of JURA and the effort of his gorgeous daughter + family we would miss a lot without knowing it.
VISIT THEIR NEW SHOP ► www.juratools.com
MY EQUIPMENT:
LEICA A60-S Microscope
JURA ART GRAVER
Selfmade STEPRISERS for the vise.
The QUICK-CHANGE-SYSTEM from JURA
DIAMOND polishing wheels ( grey/blue/yellow ) from JURA
SAESHIN Micromotor
CARBIDE gravers, drills and burs.
AND a ton of customized gravers.
FACEBOOK ► / kochristian
WEBSITE ► www.edelsteinfasser.at
MUSIC:
Almost in F - Tranquillity von Kevin MacLeod unterliegt der Lizenz Creative-Commons-Lizenz "Namensnennung 4.0". creativecommons.org/licenses/...
Quelle: incompetech.com/music/royalty-...
Künstler: incompetech.com/ - Krátké a kreslené filmy
As a gold and silversmith I am so thoroughly impressed with your methodical and meticulous work.
I aspire to gain the level of patience and attention you display in this as well as your older videos.
I really appreciate your kind words!
Thank you very much ❤️
What an incredibly useful resource for newbies to jewelry and stone setting like myself! Thanks so much for posting!
You are so welcome! ❤
Can we point out the camera work that made sharing this possible? I mean damn, big crowd service with that
What a stunning ability and perfect execution of the becel setting !!! A real master class , thanks for sharing and salutes from Colombia !! 🙏😎👍🇨🇴
It has elapsed such a long time since i watch a new video from you. Always an inspiration to follow.
Beautifully done! You got some new tools. Patience and precision wonderfully displayed.
Thank you very much! Yeah 😎
@@thediamondsetter6158sorry I got you mixed up with diamond mounter channel. You’re excellent at setting stones him not as good.
What an hypnotic thrill to watch! Thank you!
Beautiful video Thankyou
Cool home-made cutting tool!
Using the airbrush to identify high points is very clever. I've never seen that before.
Thanks for another great video...especially showing how you made the bright cut engraver...hope to try this technique.
Have fun! Hope it helps ☀️🙏🔥
Thank you! I’ve been looking for this ❤
🙏
Fascinating to watch
Sir your work was flawless!! My best regards and thank you for sharing
Thak You for sharing your way. Excellent video.
Just found you great vid ,is the occlusion medium you use water based or some other carrier?
If you have trouble removeing it with ultra sonic cleaner ,obtain a baby food jar ,put solvent and un mounted piece with jar lid secured ,and put in ultrasonic cleaner, cheers John👍🇦🇺🐈⬛😎
My respects Master
Super🎉🎉🎉🎉🎉
你是一位很好的老师，希望你能教授一些珠宝知识
like your video
This is amazing! Thanks so much! Quick question, when you’re pushing the bezel/setting the stone is that a pneumatic tool you’re using to do so? Thanks so much!
THX so much 🙏!
Yes its a pneumatic System from JURA - TOOLS. Best tools out there 🔥
What is the green stuff that you spread in to the ring
Wow! Amazing! Herzlichen Dank! What‘s the tool at minute 55?
Its a carbide ball bur. Most of the time i use carbide tools. There are some downsides, and much more expensive, but the edge stays so much longer, and i can work much quicker.
All the best ❤️
Hello, What is that paint stuff that you put on the ring prior to the beginning of the video? You took it off with a solution and a Q-tip. I suppose that makes it easier to see where you are removing metal?
It's probably Seat Check Disclosure Powder. Really helps you see where the stone is touching.
The so called „occlusion“ spray coats the metal with a thin film. When i insert the stone you see exactly where the stone has contact. Thats the only (safe) way to make sure there is a regular and even contact with the metal.
I removed it because i don‘t want the green spray trapped between the stone and the metal, especially with whitegold that gets a rhodium coating it has to be very clean. Also ultrasonic cant remove 100% of trapped powder.
Lovely work, one question how do you not scratch the stone?
@@paulbarfield4033 🙏 - Make sure you do not get in contact with your tools and sandpaper! When you do the brightcut polish the contact point of the graver where it could meet the stone - so it will slide on the stone instead of scratching it. And always - no force against the stone!!
@@thediamondsetter6158thank you so much for the reply 👍
You sprayed it with a green coloured powder to find where the stone touched metal?
Yes
Очень круто 👍🏻👍🏻👍🏻