Installation of the PD10-M CVR 36" retrofit device for the Falcon 16 & First Choice 36 series.
Vložit
- čas přidán 11. 09. 2024
- In this video, we will guide you through the installation and adjustment of the Command Access PD10-M-CVR exit device. We'll show you how to change the handing, install the device, and set the motorized latch pullback adjustment. You'll also get to see our innovative Push to Set Technology in action, making installation a breeze.
hi were can i get the top rod with lock and the bottom rod and lock and the wiring for the mororized lacth pullback
You can call Command Access at (888) 622-2377 to get information pertaining to your question.
Can you please give examples of where you'd want to use the , hold back option vs. the night latch option? Thank you.
The "hold Back" is electric dogging. This holds the push pad down and the device unlocked during a specific time period. The electric dogging is often used during working hours to allow people to come and go without having to swipe a card, enter a code in a key pad use a mechanical key etc. If installed on a fire rated door then the power supply should be hooked to the fire alarm system. If the fire alarm is triggered then the power supply cuts the power to the exit device and causes it to extend the latch, thus looking the door.
@@locktrainer / thank you, Sir🤠
can you provide me with information as , power supply , type of card access that you use AND ELECTICAL MADULE PART NUMBER . and do you have a wiring diagram of installation thank you
Hi Raul, sure please call into customer service at 888-622-2377 & we can help you out!
How do you adjust the bottom rod to stop dragging?
You should be able to adjust the hex bolt to bring it up a bit. I would call into tech support for more details. Thanks for the future video idea!
@@commandaccess We tried spraying WD40 from the top and that seemed to fix the problem on 2 doors. We're in an arid climate with dust, so when it got dried it wasn't resetting properly at the top and that seemed to be causing the drag at the bottom.
@@Warvvolf Glad, you got everything working!
@@commandaccess where is the hex bolt?
thats why im here as well... lol. but mine is a different model.. the kawneer door. i needed to do a rekey . now the damn bottom rod is dragging, fml!