I am Neeraj Raheja from Total Tech Engineering. It is a great to see this innovative technology. For sure, You can do amazing business in India. Wish you all the best.
Hi Norman, thank you for your comment. The material backflow happened at the check ring is recognized by many injection molding machine makers. I think it is fair to say the managing the backflow amount and consistency is the technology of the conventional reciprocating screw system. czcams.com/video/IrOVreMgrmo/video.html This is one of example of controlling its backflow.
Way back when technology was changing from plunger to screw machines, many plunger machines were retrofitted in this very method. Nothing new or revolutionary.
У меня есть советская литература по литью пластика и там описание и чертежи точно такие и самое интересное эти станки были ещё в 30х годах как экспериментальные но хмельницкие проще
Hi Motorsports X, our magnesium machine, MG series are very different system from our plastic injection machines. You need MG machine for magnesium molding. Thanks.
how is the consomation of electrique is tow mor than a clasique machine a loock that there are tow resitanse in this machine and the laste control systeme it s good machine and thre is a big probleme withe the carte control systeme that wate see
slow down there chief and use spell checker.... its like you put your words in a blender. About half of them are spelled incorrectly. hopefully you're doing better at English 2 years later.
Sodick high speed injection can achieve up to 1500mm/sec. Please, check it out the link for more info. www.plustech-inc.com/products/high-speed-pressure/
I am Neeraj Raheja from Total Tech Engineering.
It is a great to see this innovative technology.
For sure, You can do amazing business in India.
Wish you all the best.
this is the best plastic injection technology today.
I worked in this field for several years. Only a cracked "check ring" will allow material to back-flow around the screw.
Hi Norman, thank you for your comment. The material backflow happened at the check ring is recognized by many injection molding machine makers. I think it is fair to say the managing the backflow amount and consistency is the technology of the conventional reciprocating screw system.
czcams.com/video/IrOVreMgrmo/video.html
This is one of example of controlling its backflow.
Way back when technology was changing from plunger to screw machines, many plunger machines were retrofitted in this very method. Nothing new or revolutionary.
Ken Lemanski Do you know how they close the extruded? Do they really just push the screw forward so it seals the opening?
May I ask what is the minimum deliverable shot size is?
Can this be used to create colour grading in a product?
I think i just injection molded in my pants
lol
Nice。
Goood
Do your company makes only Plunger based Injection machine.
Yes. Thank you for asking.
У меня есть советская литература по литью пластика и там описание и чертежи точно такие и самое интересное эти станки были ещё в 30х годах как экспериментальные но хмельницкие проще
What about sensitive materials? Like acetal, poly carbonate, TPU?
The machine is made for high performance materials such as PEEK, PSSU, LCP, etc. Yes, this machine is good for Acetal, PC, and TPU.
@@SodickPlustech Thank you....
@@SodickPlustech Do you have any branch/ dealer/ joint venture in India?
@@southtonorth-original
www.sodick.co.jp/company/overseas.html#sectionC
@@SodickPlustech Thank you...
did i hear correctly that the same machine that will do plastic, will do magnesium?
Hi Motorsports X, our magnesium machine, MG series are very different system from our plastic injection machines. You need MG machine for magnesium molding. Thanks.
Vikash Kumar 9507122099
Vídeos en español
how is the consomation of electrique is tow mor than a clasique machine a loock that there are tow resitanse in this machine and the laste control systeme it s good machine and thre is a big probleme withe the carte control systeme that wate see
slow down there chief and use spell checker.... its like you put your words in a blender. About half of them are spelled incorrectly.
hopefully you're doing better at English 2 years later.
okay but what stops the plastic going inside the mold when filling the injection chamber ?
May be a spring loaded shut off Nozzle..
will this technique be able to process 4 kg of ldpe plastic ?
this is slow what is for high speed
Sodick high speed injection can achieve up to 1500mm/sec. Please, check it out the link for more info. www.plustech-inc.com/products/high-speed-pressure/
My job
Báo giá cho mình nhé