Replacing The Front Motor Mount On The $1 Honda Element

Sorry we haven't uploaded in a while, but here is the video of us changing the front motor mount.
Hope You All Enjoy!!!!
Here is the link to the motor mount
Amazon:www.amazon.com...
We are not sponsored or endorsed by any of the products or companies in this video.

[@MrHondablink]

To get that bottom bolt easily, I used a boxed end wrench and used another to piggy back on it as an extension. Way easier than trying to get a socket and extension on it.

[@peterd2097]

You should note that this motor mount is only compatible with the manual transmission element. The automatic transmission motor mount is different.

[@RepentanceAnabaptist]

You are right.

[@arthurgalleaud3988]

OEM PARTS ALWAYS BETTER your dad good job!

[@bervotten]

I’m glad you left the link on the description, this way I can avoid that specific one

[@RepentanceAnabaptist]

Good Idea!

[@canuckfixit7722]

What were the symptoms of the broken front motor mount?

[@RepentanceAnabaptist]

For us it was discovered at the Mandatory State inspection. If you look at it under the car, you can see if it is good or not. We will be adding another video fir the front motor mount on a 2003 Automatic Element.

[@canuckfixit7722]

@@RepentanceAnabaptist Ok, so a surprise then. Yes, there is a following comment in this video about the mount for an ATX being different from the MTX.

[@jasonvredenburg4839]

Engine splash shield

[@76derlis]

Did you change the dash lights yet?

[@projectelement4980]

No we have not.

[@mattfoley6082]

9:59 It's not a dilemma. Not what the word means.

[@projectelement4980]

From the Cambridge dictionary: "a situation in which a difficult choice has to be made between two different things you could do:".

[@mattfoley6082]

@@projectelement4980 Exactly.

[@projectelement4980]

We had a difficult choice either grind out the edge to make it larger OR, drill out the hole.

[@mattfoley6082]

@@projectelement4980 Ok, now I get it. Are you sure you bought the right mount for your model? Auto and manual are different.

[@projectelement4980]

Yes, it was ,it was just not cast well.

[@mattfoley6082]

Where'd you buy the mount? OEM or aftermarket?

[@projectelement4980]

Both the video at 13:00 and the link in the description reveal that answer. I guess you have a dilemma either finish the video or read the description.

[@islandaerial3414]

See what happens when you tangle with Chinesium...
Thanks!

[@projectelement4980]

Thankfully we won!

[@theneanderthal6854]

Get a set of wrenches you bloke!

[@projectelement4980]

I have since then, thank you for your helpful suggestion.😄

[@curtisgavel6882]

a few washers would solve that ? maybe

[@projectelement4980]

No, we had to use the Dremel and drill, but we got it.