Chassis Swapped Supercharged LS3 C10 Full Build Walkthrough! - 1972 Bagged Chevy Truck Build Ep. 20
Vložit
- čas přidán 4. 06. 2024
- Missed any part of the supercharged LS3 C10 build? Catch up on it here!
• Supercharged & Chassis...
It's finally time to say goodbye to our GSI chassis, Whipple Supercharged, LS3 swapped 1972 C10 Chevy. Well... almost! But before we put an end to this slammed C10 build series, we figure it would be a great time to walk down memory lane and show you guys every inch of this truck in one episode. Since we go episode by episode through these builds, sometime even we forget how much work goes into building a truck like this and where these projects start out!
So we're going front to back on this bagged Chevy truck, from the LS3 topped with a 3L Whipple, to the Custom Car Emblems badges, the Airlift performance suspension, the custom bench seat from Lee at E3, the Sparq steering wheel, the custom wood bed floor and the chopped wheel tubs to match, the electronic metal bed hatch, and of course our 3 piece Vossen wheels! Are we forgetting anything?
Oh yeah! The inner fenders for the front of this truck! So if you were worried about never seeing this truck again, don't worry. We still have ONE FINAL EPISODE before this truck leaves us for good!
So make sure to like, subscribe, leave a comment so you don't miss the final episode of this build. We also have updates coming on our twin turbo LSX Chevelle, the Godzilla swapped Continental, and even some new projects we have cooking up for you guys! - Auta a dopravní prostředky
Mike that bed is hard core. Much respect with the wood work it's so unforgiving to work with. Overall a very clean build laying frame is hard to pull off well and that frame company is a game changer.
Thank you! GSI is making some crazy moves in the custom truck game. We're using them for another C10 project coming up soon too!
Mikey y’all do great and extensive work, the truck is beautiful and I can’t wait to see the Lincoln complete. Keep up the awesome work Pops and please relate my sentiments to your crew!
Awesome build boys! Great job! Thanks for sharing your experience with us. Just finished #3 chemo , 2 more to over next 3 weeks!
I appreciate your support and entertainment whilst I’m in the cancer centre getting treatment!
Thanks Mike!
I hope the treatment is going well! You got this!
@@SalvagetoSavage thanks ! Appreciate your support!
Love the build keep it up
Wasn’t sure about the Vossens at first. Love em now
The bed was the best part of the build, just for you, Mickey, no realy, i enjoyed the build from start two finish....wicked truck.😊.
Thanks a bunch!
Would love that seat design in My Square S10. And two tone peach and cream paint. Beautiful truck. Loved the build. 💪🏽💪🏽💪🏽
Amazing. What a gem. Killing it as always. I’m sure he’s stoked to be cruising in that thing.
Oh definitely!
In my honest opinion your an American bad ass the best custom car builder in modern American History
Wow! Thank you!!
Respect we’re respect is due!
Man what a beautiful truck....I'd drive the wheels off that thing. NICE work gentlemen
Thank you!
S2S Absolutely KILLED this build!!! The bed work and the interior are my favorite parts!
Outstanding, simply outstanding! You’re setting the pace now not just following it!
S2S on another level of build's representing Florida 💯
Thank you so much!!
Damn, this build turned out so incredible! Can't wait to see what's next!
We got some cool projects coming up for the second half of the year. But first we have to finish the Chevelle and the Lincoln for you guys!
I love this truck man. Y'all killed it. Hard to pick one but I think the bed has to be my favorite part. Masterpiece of craftsmanship man
BOOM! Great build from S2S.
Glad you like it!
Buen trabajo 👍 ,llevada a otro nivel estupendo.Y a comentar sobre los guardabarros internos delanteros que pensaba que lo necesitaba pero ya como dices al final del video que van a construirlos entonces quedará 100% inmaculada 👏
Super sick and clean work guys...congrats!
3 months is crazy impressive.
I think it's the bed work and dash that gets it for me
The bed definitely sets it apart!
Freaking bravo you guys kill it every time. 👏🏿
Thank you!!
I think the bed is Mikey's favorite part, I know that's *my* favorite part!
Oh it definitely is!
Next level beautiful!
Fantastic job! 👍
Thank you very much!
That bed is wicked
That exhaust is a shin shredder and keeping that engine bay clean is near impossible, let’s hope nothing gets lodged in there
Bad azz truck. That bench though! Boy killed it on the interior. Sits right, wheels are awesome. Great job on the bed too! Ok, now the one thing I noticed. Hood needs a little love on the adjustment. Watched all the videos and got the t shirt. Keep up the good work S2S.
Just gotta loosen a few bolts to make the adjustment and we're good! And Lee definitely killed it with the interior!
Hi Mikey, great run down of Dimebagged, and amazing cars at the show. I am restoring a FJ45 Land cruiser, which was next to you when talking to the owner. I do love your builds, they are amazing.
I love everything you all do! With that being said, You guys couldnt put a heat shield/plate around that exhaust tip!????
We could, but we didn't want to!
Bad to the BONE Mikey
Thank you!!
"Straight Killer" sums it up. Love the bench seat, all the craftsmanship that's gone into this truck is amazing. Great job guys!
Thank you!! We're really stoked with how this one turned out!
Ahhhh my savages
🔥🔥🔥
I am a Ford guy, I bleed blue. But, DAMN!!!! that thang is seeeexxxxxxxxxxxxyyyyyyyyyyyyyyyyyyyyyy!!
Maybe we can convert you into a C10 guy! lol
Absolutely LOVE everything (maybe not the name, but that’s for another time)! I just want to know how you dealt with water accumulation in the bed with perforated grating and “cove” next to bed. …OR… are you counting on this as a show truck only where water collection should be mitigated by owner?
It's not sealed off around the edges where the floor meets the bed sides. So any light rain will be able to drain out from there. But this isn't a truck that's meant to be taken out in the heavy rain!
Doing the walk around of this amazing truck in cut off jean shorts is the most Florida thing I've seen all week! You could have at least found a retired stripper to point at things while you do a voice over.
We tried getting Mike in sandals too so we could complete the look! lol
The bed
Dime bag is so seeet 🍒
Thank you Luis! We got another C10 coming at ya sometime this year too!
@@SalvagetoSavage amazing
💪👊👏
Was able to find the source you referenced for the custom emblem/badging. Please provide more information. Thanks
I saw on a previous episode when you scanned the white for color matching but is it possible to know exactly what the details are on the blue? Beautiful truck and color
We'd have to ask the paint shop but they moved out of our warehouse complex!
Are your designs for fabrication ever at SEMA ?
👍💪
damn who was breathing in the mic the whole video lmao
Our camera man was sick when we filmed it! lol
How many times did Mikey say CUSTOM.... 🤔
Count em up and let us know!
😳😳😳😳😳😳😳😳😳😳😳🏁🏁🏁🏁🏁🏁🏁🏁🏁🏁🏁
With all do respect sir, y'all torn the truck down and reassembled the truck, so why doesn't the hood set straight? You can see on the driver side up by the wiper cowl the hood sets in just a little which is bringing the hood up in the front on the driver side. And on the driver side the bed does not line up with the cab lines. Why wasn't these small details done correctly sir, and again I seriously do not mean any disrespect at all sir.
Becus the guy only paid 50 thousand not 70 thousand
Looks like it’s up a touch from laying frame, the front tires push the hood up .
Truck is nice but has no wheel wells that’s a deal breaker! I realized its a slammed truck but it still needs wheel wells.
Well then stick around because we're doing inner fenders on it sometime in the next month!