Tips and Hacks! | POP out Door Dent!

Sdílet
Vložit
  • čas přidán 13. 06. 2022
  • Today's repair is in San Jose Ca. Popping out a door dent per customer request. I will be sharing lots of tips and hacks using some simple tools like a hammer and pliers to get the job done.
    Training Email Me Here.
    tinyurl.com/36529zkp
    PDR Training secretpdrpaintlessdentrepairtr...
    Collision Tools
    pdr-training-tools.com/en/
    Auto Body Suction Cup Slide Hammer for Dent Repair
    amzn.to/3tBPtj3
    Dewalt 20V Cordless Polisher
    amzn.to/3QjM2aH
    Trim Removal Set
    amzn.to/3zE8J3x
    Torch
    amzn.to/3MOqXSF
    Mychanic rolling stool
    amzn.to/3NSPLuh
    Plier for rolling sheetmetal edge
    amzn.to/3mP5pegn
    4oz Ballpeen Hammer
    amzn.to/3mOL8p4
    Gorilla Tape
    amzn.to/3aViJLf
    Soft Hammer
    amzn.to/3mOnHMw
    PDR Knock Down
    amzn.to/3aYS5Bo
    www.39-mobile-paintless-dent-...
    dentdiscountmobileandbodyshop...
    www.yelp.com/biz/dent-discoun...
    www.yelp.com/biz/dent-discoun...
  • Auta a dopravní prostředky

Komentáře • 187

  • @mateshaljc
    @mateshaljc Před 2 lety +21

    I watch plenty of your videos, and each time it first appears as though "that dent can't be fixed" lol. Your skills are amazing!!

  • @martycaldwell7197
    @martycaldwell7197 Před 2 lety +5

    Been watching you for few months. You made me think out side the box. Been doing body work for almost 40 years . been using some of your technique the last couple of weeks . thanks for sharing

    • @DentDiscountPDRBodyShop
      @DentDiscountPDRBodyShop  Před 2 lety +3

      Marty thank you for checking on my videos. It’s great having more techniques to add to our arsenal

  • @Eccy2349
    @Eccy2349 Před 2 lety +2

    Double bend ball tip is my favorite for most repairs. Changing size of tool per repair. Great content thanks for sharing. I personally appreciate the pushing techniques you show as well. Helps me understand more from my perspective. Thanks again!

  • @dododo7268
    @dododo7268 Před 2 lety +1

    Really amazing work and love how the video is demotrating the process!

  • @amoretink33
    @amoretink33 Před 2 lety +2

    Great job Ken! You never disappoint!! Just unreal!!!

  • @superkev2000
    @superkev2000 Před 2 lety +1

    Absolutely amazing work as usual Ken!! Thanks for sharing!

  • @nigelmurlis1955
    @nigelmurlis1955 Před 4 měsíci

    the best and most educational PDR vid i watched . well done and thanks

  • @user-ts7rz8bv5y
    @user-ts7rz8bv5y Před 11 měsíci +1

    I’m a 67 yo retired body shop owner, I got out of the business 17 yrs ago when my wife died. I still enjoy watching all the car restoration shows on tv,I was a natural when it came to working on cars as I never took a class to learn the trade and I used to clip ‘‘em if that kind of work came in, even roll overs. I’m interested in taking your classes just so I can prove to myself that I can still do it. Can ya help me out? Glen

  • @gbcremont
    @gbcremont Před 2 lety +2

    отличная работа!

  • @user-nw6kp8ux2y
    @user-nw6kp8ux2y Před 2 lety +1

    Good work 👍

  • @coloradofleetworks8852
    @coloradofleetworks8852 Před 2 lety +1

    Great work as always Ken .

  • @paulmoor595
    @paulmoor595 Před 2 lety

    Wow, absolutely amazing work...a joy to watch some as skilled as you work on a panel.

  • @centrotecbauru-speder
    @centrotecbauru-speder Před 2 lety +2

    WOW . Good Job !!!

  • @michaeld9051
    @michaeld9051 Před 2 lety +1

    Ken I've been watching you do your magic for well over 18 months. Your have made some amazing improvements in your technique and with the tools. I would have loved to be able to learn from you. But I've had a couple of back surgeries in the last year. Don't think I could do it now. But I still love seeing you work the shit out of those tools. Thanks for the videos.

  • @chadwenum2425
    @chadwenum2425 Před 2 lety +1

    Great video

  • @Hoserfishing
    @Hoserfishing Před 2 lety +1

    working on a chev truck door right now....you are a friggin genius my man.
    loved the plier and plastic tip to roll the edge
    also the tip on ripping paint off

  • @justinshields4216
    @justinshields4216 Před rokem +1

    I love your channel Ken. Very knowledgeable about your profession. I really appreciate your time in making these videos. I've worked in a bodyshop atmosphere and you'd be amazed how many techs that can't even properly secure a pulling post to anchor pots. I love the painting side of it & still spread my share of mud.. but im getting into PDR more & more as a detail guy & panel repair.

  • @craighanzi1039
    @craighanzi1039 Před 2 lety +1

    You are awesome, I can't believe what you are capable of. I never would have thought it possible to do that kind of metal magic. Thank you for your expertise

  • @Supremepdr
    @Supremepdr Před 2 lety

    Killer work ken pushing the limits as always!

  • @marcosgarcia7113
    @marcosgarcia7113 Před rokem

    im a 30 year, Master ASE autobody tech.what i watch you do is incredible.im going to use some of your techniques.thank you so much for sharing.im amazed at your skill

  • @PDR_dent
    @PDR_dent Před 2 lety +1

    Really an artist in your work 👏

  • @oliverbenis
    @oliverbenis Před 2 lety

    Great video. Again showing what is possible with PDR.

  • @cfldentrepair
    @cfldentrepair Před 2 lety

    Another masterpiece, Ken!

  • @reginaldomartelinho6204
    @reginaldomartelinho6204 Před 2 lety +1

    Great job man 👏👏👏

  • @Simon-hf3lw
    @Simon-hf3lw Před 9 měsíci

    You do perfect work hands on job experience that's the best knowledge you could have

  • @successteamful
    @successteamful Před rokem

    Yes, training would be nice. Thank you for your professionalism.

    • @DentDiscountPDRBodyShop
      @DentDiscountPDRBodyShop  Před rokem

      secretpdrpaintlessdentrepairtrainingonline.com/
      One on one training send me an email on this link

  • @bigbrasem6117
    @bigbrasem6117 Před 2 lety +3

    Witaj! Jesteś dla mnie mistrzem niesamowite z jaką pasją wykonujesz swoją pracę. Też się tym zajmuję ale to co Ty robisz to jest największe mistrzostwo! Pozdrowienia z Polski.

  • @RLTango
    @RLTango Před 2 lety

    Killer work! Very cool.

  • @Mark-jc1bu
    @Mark-jc1bu Před rokem

    Great work done right

  • @mohfarouk4163
    @mohfarouk4163 Před rokem

    Daaaamn you are good,god bless you man

  • @jimaragon2110
    @jimaragon2110 Před rokem

    You Sir are the GOAT.

  • @marting7891
    @marting7891 Před 9 měsíci

    Maestro es impresionante sus trabajos, cada dia me sorpende mas, me encantaria poder aprender a su lado, saludos desde Argentina..

  • @Abevanegas2010
    @Abevanegas2010 Před 2 lety

    Great video 👍👍👍

  • @REDANGEL120
    @REDANGEL120 Před 2 lety +1

    👍👍👍
    Как всегда - на высоте!!!

  • @glennfitzpatrick3891
    @glennfitzpatrick3891 Před 4 měsíci

    So far out of my league, I may as well just take it to a shop. Stellar work!

  • @allinthedetails836
    @allinthedetails836 Před 2 lety

    that's a sub from me.. loving the videos man!!

  • @baileymah8163
    @baileymah8163 Před 2 lety

    This is amazing, definitely subscribing hopefully one day I can be as good as you!

  • @idontlikecops1
    @idontlikecops1 Před 2 lety

    You're an artist man

  • @thomasfischer2638
    @thomasfischer2638 Před 2 lety

    Another one 👍 phenomenal good

  • @marinob7433
    @marinob7433 Před rokem

    Dude you rock!

  • @JoseSalazar-gn8gk
    @JoseSalazar-gn8gk Před rokem

    Great job, I’m always surprised with the new challenges on every video, I am not too new to the Chanel but It would be nice to learn the basics of the trade, keep the videos coming!

  • @tylerpeck2710
    @tylerpeck2710 Před měsícem

    new subscriber here! starting my pdr journey. 6 years experience in the body shop before getting into the elevator trade, looking to start this side gig doing pdr. Thanks for the informative videos boss!

    • @DentDiscountPDRBodyShop
      @DentDiscountPDRBodyShop  Před měsícem

      Welcome to my channel
      PDR training Send me a message through this site.
      www.39-mobile-paintless-dent-repair-cost-san-jose.com/beginner-pdr-level-training/

  • @KINDJIRO
    @KINDJIRO Před rokem +1

    RESPECT!

  • @anthonyshortt3043
    @anthonyshortt3043 Před rokem +1

    Grate job

  • @hemnomar1921
    @hemnomar1921 Před rokem

    Im Heman from Iraq you are the best you have learned me so mach thamks a lot you are my teacher I hop you be safe and seccesful

  • @raaziqjohaadien8247
    @raaziqjohaadien8247 Před 8 měsíci

    hi from south africa amazing work there trying to learn about this also about the tapping , how where and why

  • @slaznum1
    @slaznum1 Před 2 lety +1

    Pretty much my snap-on screwdrivers always resonate with me!!

    • @DentDiscountPDRBodyShop
      @DentDiscountPDRBodyShop  Před 2 lety

      Snap on line of tools resonates with you and me my friend
      thank you so much for your comment

    • @whodat7366
      @whodat7366 Před 2 lety

      @@DentDiscountPDRBodyShop when we going to see you on the @ Those dent guys podcast @ Trident PDR @ Dent Remover ? #realog #reflectioncorrection #pictureperfect #creaselife #flexingsteel #dentdiscount

  • @johnphillips1345
    @johnphillips1345 Před 2 lety

    Hey the Ford mechanic here. I'm still practice PDR getting better but still having a little trouble blending the dent but your videos help the learning process so thanks..

    • @DentDiscountPDRBodyShop
      @DentDiscountPDRBodyShop  Před 2 lety

      John thank you for your comment
      You have to keep pushing through and you will begin to see more and more
      Stay in their champ!

  • @user-rr8mm4hv3z
    @user-rr8mm4hv3z Před 2 lety +1

    Thank you for show dent
    Akbar Iran
    Tabriz

  • @hokagitumuyuki2925
    @hokagitumuyuki2925 Před 2 lety +1

    I allways follow ur video men before do pdr on my car tail gate. I been buy some of the pdr tools but did not start to do a pdr. Still gaining some pdr techniques. I like your special pliers for pdr.

    • @DentDiscountPDRBodyShop
      @DentDiscountPDRBodyShop  Před 2 lety +1

      Right on my friend thank you I appreciate that

    • @hokagitumuyuki2925
      @hokagitumuyuki2925 Před 2 lety

      @@DentDiscountPDRBodyShop what would be the remidy if there is no access on to use the push rod. Is it pull tab technique may be use?

  • @chrisgonzalez7203
    @chrisgonzalez7203 Před rokem

    new subscriber here! awesome wrk!! i use to wrk in an autobody shop n man did i love it but was suppose to go to school for it n never did life had other plans for me i guess deff enjoy watching ur vids tho!

  • @dwaynesmith9134
    @dwaynesmith9134 Před rokem

    I think I have watched nearly all of your videos. What do you think of Glexo cold glue?

  • @shaqhobson5074
    @shaqhobson5074 Před 2 lety

    I like your videos before I watch because I know Amma like the video.

  • @ulkenstride6964
    @ulkenstride6964 Před rokem

    This is fantastic. I'd love to learn how to do this. How do I get training for this?

  • @gersonjesusdelreygutierrez3700

    Espectacular trabajo.

  • @anicaputo6289
    @anicaputo6289 Před 10 měsíci

    Thanks so much for the video, it was clear & thorough. It’s plain to see that what you do is a combination of art & car surgery. You had mentioned we could ask for assistance in the comments so here goes my little story, prefaced with an apology for it’s lengthiness (I will try to at least make it entertaining & flavorful).
    I have a few long dents along the bottom of my driver side door &the door behind it from side-swiping these wood blocks that border a small hill in my front yard where my drive-thru-style driveway curves around (I’m embarrassed but in my defense I had a car in front of me so instead of being able to pull straight through I had no choice but to reverse out in the early-morning pitch-black cloud-choked sickle moon sky. It was a perfect storm of unfortunate factors, a deeply unfunny comedy of errors). So I’m hoping to collect enough tips & tricks online - as well as tool or dent removal kit suggestions - from a brilliant PDR Pro (you, if you might be so kind & inclined) in order to finally rid myself of the spectacular dentification of the entire driver’s side of my dear SUV, Appa. Soooo if you’re feeling froggy & would take a ~leap~ into the comments to tell me what ~toa-do~ I would be incredibly grateful, Dr. Dentmeister Flex.

  • @user-cb1fi6zs8m
    @user-cb1fi6zs8m Před rokem

    Дядька, ты Мастер!

  • @christopheremde4064
    @christopheremde4064 Před 2 lety +1

    Yes please

  • @ahmedalhashmi7583
    @ahmedalhashmi7583 Před 2 lety

    Very nice job my friend I follow you from Iraq

  • @courtneylewis9500
    @courtneylewis9500 Před rokem

    Great job, how can i get some of those glue tabs

  • @user-ln7of9gs4s
    @user-ln7of9gs4s Před 2 lety +1

    “Can the man of steel pull out the dent on this 8500 gallon fuel tanker?” I see some dents on tankers and think how satisfying it would be to watch you pull a dent out.

  • @sostenespuentejr6852
    @sostenespuentejr6852 Před měsícem

    New subscriber, new to dent repair. Trying to fix myself. I'd like to know when would hot air or water be used. I see you didn't use any? Thanks

  • @allenwilson6585
    @allenwilson6585 Před 2 lety

    My DentDial is the most stable pusher I own. It is also very powerful.

  • @AlfredoHernandez-fh5fk

    Brilliant job master like always how long it took you to finish that door 👌👍

  • @brentclark6466
    @brentclark6466 Před 11 měsíci

    I'd appreciate some lessons from the man. could use some tips and beginner training to help out with my new project.

  • @palvinderjagait1335
    @palvinderjagait1335 Před 2 lety

    Best!!!

  • @mr.grillo3385
    @mr.grillo3385 Před 4 měsíci

    Would love to try some of this work myself. Terrified to use ANYTHING metal on paint lol

  • @natelarue1313
    @natelarue1313 Před 12 hodinami

    New Subscriber. Whats the trick to using the rods on a double wall door panel? My 2005 GMC Sierra has a double wall outer panel with foam fill. I cant get a good push on the dents.

  • @mr.blonde66milkyway66
    @mr.blonde66milkyway66 Před 2 lety

    New subscriber!!!
    Got a dented side panel on a 2009 Ford E350 Super Duty.
    Right behind the driver's side door. A large dent separating the door seem from the full piece back panel. A decent size T-bone about 3 feet X 2 1/2 feet or so. Directly behind the driver's side door all the way to the gas tank door....
    Love the channel. I've done some repair work before mostly cosmetic.
    I live in my vehicle ( Los Angeles 💲💲💲)
    So it's going to be near impossible to empty it out to repair it.
    What would you suggest?!?;
    Kits you sell?! Thanks again!!!
    *Large dent drivers side on 2009 Ford E350 Super Duty* 🙏✅

  • @KindaRuined
    @KindaRuined Před rokem

    New subscriber here. hopefully i can get half as good as you. im in sacramento as well haha not too far from you.

  • @robertcampbell5605
    @robertcampbell5605 Před rokem

    Good lord this guy is good as shit.

  • @wwaxaww5090
    @wwaxaww5090 Před 2 lety +1

    ive got a nasty dent on my miatas quarter panel, is there a way to contact you guys with questions?

  • @lovelife8089
    @lovelife8089 Před rokem

    wow you’re Genius

  • @INOA_OLE
    @INOA_OLE Před 2 lety

    I'm a new subscriber and just purchased some pdr tool rods.. Q: Is it possible to not leave any small dents and restore the surface back perfectly? I did my dent but have a hard time getting the smallest dents and hight spots to lay out evenly.

    • @DentDiscountPDRBodyShop
      @DentDiscountPDRBodyShop  Před 2 lety

      Welcome to my channel thank you for subscribing
      I use PDR bars to pull out the little Dents

  • @eliarzouan8081
    @eliarzouan8081 Před 2 lety

    Can you suggest how to pull out the chassis on the bottom of the front left side door ? I have 3mm gap on the top and door does not close properly. Look forward to your reply 😊

  • @FestarFinnen
    @FestarFinnen Před 2 lety

    Hi! I have seen plenty of your vidoes, but one thing I wanna see is, how long time does it take for you? Can you start having a clock on the videos that shows the process? Greetings from Sweden!

  • @CLINTSTER77COX
    @CLINTSTER77COX Před rokem

    New subscriber ! I am having a hard time grasping a crease tab . If you glue it over an imperfection and pull the glue is contorted to the imperfections. My brain hurts. I grasp almost everything ele . Thanks for the videos

  • @patrickcoyle7997
    @patrickcoyle7997 Před 11 měsíci

    Hi I'm restoring 79 trans am re skinned my but dropped it and dented it pulled it out but not good enough so I try filling it but not happy with the results

  • @chrisplace3024
    @chrisplace3024 Před 2 lety

    First watching the man of Steelllll

  • @dansmolka8370
    @dansmolka8370 Před 2 lety

    Can the dent be pulled using PDR if the dent on the door is also pushing in the reinforcement beam that is adhered to the inside of the door skin ?

  • @user-tj4gp2jo3b
    @user-tj4gp2jo3b Před 9 měsíci

    I have got Aldi 2012 I have got dint lower seal how do fix it

  • @AlexandrPermyakov1980
    @AlexandrPermyakov1980 Před 2 lety

    Работа 👍💪

  • @robertduley7658
    @robertduley7658 Před 2 lety

    new here from FL

  • @marcinimperowicz5163
    @marcinimperowicz5163 Před 2 lety

    Hi my name is Marcin I work in auto garage I do small dent for me you are incredible ❤

  • @krazykozey2259
    @krazykozey2259 Před rokem

    Could you have done this without the pusher tools? Only glue tabs and your tapping hammers? I'm ocd af and finally finished my shop and picked up a used car dealership as my first client. After I recoup a little here, I'm interested in a couple hour course. I polish metals, paint, and color sanding. Never have done pdr besides a few truck bed panels massaged with a 2x4 lol. I have a 2017 Chevy Express LS3500 I'm working on now that the side was pushed in around the rocker area. The clear coat is clean, so I ordered a kit to see how much I can pull out. Wish me luck, lol.

  • @nyamuknyamuk9069
    @nyamuknyamuk9069 Před 2 lety +1

    👍👍👍

  • @mohsinikhlaq2854
    @mohsinikhlaq2854 Před rokem

    Is this dent puller m c available in Pakistan

  • @LikeSubscribeFollow
    @LikeSubscribeFollow Před 2 lety

    Are you ever on the east coast? Or, can you recommend someone that does work as good as you for the east coast??

    • @DentDiscountPDRBodyShop
      @DentDiscountPDRBodyShop  Před 2 lety +2

      I would recommend getting on yelp in your area reading some reviews and checking out some pictures.

  • @D0CT0R420
    @D0CT0R420 Před 2 lety

    I'm a new viewer and I like peanutbutter

  • @arsmitty1415
    @arsmitty1415 Před rokem

    Would be honored to have the opportunity to train with the best, I live in Reno, Nv

    • @DentDiscountPDRBodyShop
      @DentDiscountPDRBodyShop  Před rokem

      secretpdrpaintlessdentrepairtrainingonline.com/
      One on one training send me an email on this link

  • @andrewhigdon8346
    @andrewhigdon8346 Před rokem

    Why did you have to. Go in through the wiring harness hole when you had removed the door panel?

  • @amarjeetsingh-nw4gd
    @amarjeetsingh-nw4gd Před rokem +1

    White colour is the easiest one to work upon...

  • @CADILLACZAY27
    @CADILLACZAY27 Před rokem

    how much does a job like this cost

  • @pareotrem
    @pareotrem Před 2 lety

    Nice! How much would it cost to the client?

  • @mblake0420
    @mblake0420 Před 2 lety

    How difficult would this be if it had a flat green paint?

    • @DentDiscountPDRBodyShop
      @DentDiscountPDRBodyShop  Před 2 lety +2

      I personally would not work on flat green paint.
      It’s best to have the clear so we can get proper reflection from the PDR lights

    • @mblake0420
      @mblake0420 Před 2 lety

      @@DentDiscountPDRBodyShop thanks, what I needed to know

  • @Hertog_von_Berkshire
    @Hertog_von_Berkshire Před rokem

    🎵🎶
    Pulling dents is paintless
    It brings on many changes
    🎶🎵

  • @drummer_zay9493
    @drummer_zay9493 Před 2 lety

    Did you get a copyright hit on the Man of Steel bit?

  • @paulosoto6972
    @paulosoto6972 Před 2 lety

    🔨🔨💪💪💪Nice

  • @raphaelfelix8698
    @raphaelfelix8698 Před 2 lety +1

    👍🔨🔨🔨💪🏻👊🏻

  • @BitcoinMaxy34
    @BitcoinMaxy34 Před 2 lety +1

    Guerilla Grip Handles make life so much better.