How to Replace Window Motor and Regulator 2006-2011 Chevrolet HHR

Sdílet
Vložit
  • čas přidán 27. 08. 2024
  • Buy Now!
    New Power Window Motor & Regulator Assembly from 1AAuto.com 1aau.to/ia/1AWR...
    This video shows you how to install a window motor and regulator on your 2006-2011 Chevrolet HHR. Most power window problems can be traced back to either the regulator or the motor that drives it. TRQ produces affordable window regulators and motors that are designed specifically to fit your vehicle!
    This process should be similar on the following vehicles:
    2006 Chevrolet HHR
    2007 Chevrolet HHR
    2008 Chevrolet HHR
    2009 Chevrolet HHR
    2010 Chevrolet HHR
    2011 Chevrolet HHR
    Tools you will need:
    • Flat Blade Screwdriver 1aau.to/oaS8/1A...
    • Impact Screwdriver 1aau.to/obc/1AX...
    • 10mm Socket 1aau.to/oaC4/1A...
    • Trim Tool Set 1aau.to/oN6/1AX...
    • T30 Bit 1aau.to/ozo/1AX...
    • Painter's Tape
    • Pick 1aau.to/oAi/1AX...
    Subscribe: / @trq
    Check out our playlist:
    Chevy HHR 2006-2011 1st Generation: • Chevy HHR 2006-2011 1s...
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Komentáře • 5

  • @TRQ
    @TRQ  Před 2 lety +2

    √ Watch the Video
    √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
    √ Do it Yourself
    √ Save Money

  • @rafaelakayuco9042
    @rafaelakayuco9042 Před rokem +1

    Thanks great vid. Just installed it. The easiest job I've done on a car.

  • @wonfungi4462
    @wonfungi4462 Před rokem +1

    What if the window will only go up and down about 4” and then seems like it gets jammed?

  • @MrKofi137
    @MrKofi137 Před rokem +1

    Did you apply thread lock to ensure it never get loose?

  • @markforster6457
    @markforster6457 Před rokem

    How would I remove the regulator cable from the motor, if possible? Long story. 2010 HHR. Thanks!