Wish Arrival would produce components for mini busses and perhaps eventually a DIY kit to let builders get the frame and panels to create an electric mini bus. The materials they use to cover their vehicles won’t rust or dent. I believe a lot of people would want it.
The first time you charge a battery that was that low can be pretty dangerous. The chances of a cell being unbalanced is a lot higher when they sit for that long. I recommend staying close to the battery for that first charge and being near a window or a door in case you need to throw it outside. Also, be sure to charge it fully so that the bms can enter the balancing phase.
@@bj97301 I know how to check balance and temperature, I just don't expect every single one of the customers to do that. Especially with deep discharge cells that have a way higher chance of forming dendrites on the quickly growing SEI layer. Also pressure can build up but that's not visible in cylindrical cells until the top goes pop.
@@Beeeeeeeeeee got a better idea for where to put all of these batteries? If so feel free to implement it. It’s easy to poke holes in other people’s ideas.
Hi Jeju, how did you connect this secondary pack to the vehicle as it's not recommended to connected to seperate battery packs of different size configuration chemistry in parallel or even series in an ev.
Can we get a picture of the MOSFETs on the BMS? Some how I'm doubting the you can string them in series like that... I mean, what's the maximum Gate-to-Source Voltage of the MOSFETs?
As far as balancing, is it just relying on each batterie’s BMS to eventually equalize everything out? I’d be worried at a certain point some packs would start getting down to 30v while others are fully charged. Need a 400v version to add range to a Ford E-Transit…
Jehu, I’m working on a VW beetle conversion. Can you confirm I’m thinking of this right? With a Hyper 9 HV motor rated at max 180v I would need 5 of these packs in a series and 13 in parallel to get about 30kwh? I believe my beetle will get about 4 miles per KWh so that leaves me with a range of about 120 miles. Does that sound right? How would you arrange these??
I've been obsessed with this ever since I was a kid, but never had the direction to know what to study to master electrical circuits without killing myself lol
In your bus are you using the bms from the pack? If you use the BMS do you use the small leads to charge or go through the discharge bigger leads to charge? is there a separate charging circuit?
Hi ju .I have been watching your vids .great vids I see you have a lot more options. Hope you can help want a 72volt 20ah battery for my ebike on my down tube I can use 2 -36 inseries what do you recommend of your inventory...small and lightest as possible. .18or 19"down tube.thanks in advance.
Please show us a DIY version how to combine 2 of the Bluetti ac200p units together (like u can with AC300) I will buy more batteries and have more inverter capacity if I could combine my two ac200p solar generators.
I’ve seen nothing but bad things about them. I’ve seen people open them up and figure out that it’s not actually lipo4 and they supply you with a lipo4 charger (very unsafe) and seen other people have them explode
i wanna buy the 2x untested r5 36V 13AH 460WH pack what do you think the chance is that both of then sont work like 50%of the time they don't work or what?
I'm just learning about battery packs for e-bikes I would like to make up my own packs, I like to make up 52 volt packs ideally to batteries for my e-bike I'm not clear what BMS to get I see something generic BMS's recently priced I don't know if this would be when you're better deals to split apart and makeup to 52 packs being seem to be good quality cells or if you have other options with more capacity and cheaper all in all I'm very cheap thanks for your time let me know if this will be the most logical and cheapest route or if there's another way to get quality sales a little more work the tear apart something
I am building a scooter with a drag car slick I have a 24-volt Jazzy wheelchair motor wonder what you recommend for a battery for it if you can help please
What specifically do you want, this is a jazzy gear reduction 120 RPM output shaft with a 17 tooth front sprocket driving a 42 tooth rear sprocket the rim and the tire weigh very little but making the tube chassis 120 thousand wall Tube the speed controller is a 24-volt 500w for a brushed motor the Jazzy motor is a brushed motor I need to be able to ride this at the racetrack while we are racing between the track in the pits
What would you recommend on a battery and voltage for a E300 Scooter i am replacing batteries for and a controller for now. looking to upgrade the motor after i burn up the stock one.
@@JPSURF16 not sure it will fit 3. I see people use 2 for sure. I am getting the 36v R3 hoping the BMS will be a small one at the end. Then I can cut the battery down the middle and make it shorter and wider. Which will be the cheapest. And almost the same ah as 3 hoverboard batteries. Most of these scooter pack they are in 2 rolls of 20cells. But it will be too long to use in razor. But my plan is to change them to 4 rolls of 10. Then they will fit perfectly inside the tray. Also most hoverboard battery come with the cheapest cell and low capacity like 2500 or 2600ah per cell.
Did you decided on you replacement motor and controller yet? Maybe hold out on the battery until you decide. Because those 48v 1800w my1020 brushless motor and controller are cheap and a very popular up grade choice. Same amount of work as the 500-1000w brush motor. All larger motors require to drill new motor mount holes and remove kick stand. If direct replacement the 350w will be the biggest you can go.
I did a 36v over volt on with a 36v controller on the stock 24v motor. It go much faster about 18mph. It is for my 80# kid so the motor is not burning up. But if I am going to ride it for a long distance. I assume the motor will burn out. So keep that in mind.
@@jehugarcia Interesting video... I've just finished cleaning 4000 18650 cells pink Samsung 26f and it`s variants at 2600mah, so there is different options to set them up in, I'm planning on 10 lots of 400 cells (not charged each of them yet so the individual rating of the cells is unknown at present) I've found cooling tubing for them so each module can be cooled, I'll use the replacement BMS as used in Tesla modules a tried and tested method.. with some luck I'll have a conversion by summer.... planning for 150 mile range in a conversion....
Juhu can I run my Jetson bolt on 2 rechargeable 6 ah 12 v batteries wired for 24 v of power? I just subbed today bro n this ur world and all ur followers worlsis BRAND NEW TO ME N I LOVING IT!
@@Lifesabeachmusicvideos size? I'm sorry but I don't understand "size" when talking about battery packs.... unless your asking about how big the batteries are. Do you mean voltage? They are 10s5p 36v/42v battery packs (if actually 15ah). A solar charger is what u connect your solar panels to. So, you want to get a 42v lithium solar charger if planing to use as a battery bank for solar charging. Sry if my comment is hard to understand, I'm crazy drunk on my night off and not rechecking what I wrote but yeah. Have a good night and hope I helped, if not Sry 4 wasting u time. :)
@@skepticfucker280 Sorry I would like to know what size charge controller i would need for this product. czcams.com/video/8ifR0Fm_cOg/video.html 3.3 KWH OBX e bicycle bicycle battery toolbox.
Wish Arrival would produce components for mini busses and perhaps eventually a DIY kit to let builders get the frame and panels to create an electric mini bus. The materials they use to cover their vehicles won’t rust or dent. I believe a lot of people would want it.
The first time you charge a battery that was that low can be pretty dangerous. The chances of a cell being unbalanced is a lot higher when they sit for that long. I recommend staying close to the battery for that first charge and being near a window or a door in case you need to throw it outside. Also, be sure to charge it fully so that the bms can enter the balancing phase.
To be selling this to DIY people is just a recall waiting to happen, together with a couple of insurance claims...
@@Beeeeeeeeeee sounds like it’s not for you. You should move on.
@@bj97301 I know how to check balance and temperature, I just don't expect every single one of the customers to do that. Especially with deep discharge cells that have a way higher chance of forming dendrites on the quickly growing SEI layer. Also pressure can build up but that's not visible in cylindrical cells until the top goes pop.
@@Beeeeeeeeeee got a better idea for where to put all of these batteries? If so feel free to implement it. It’s easy to poke holes in other people’s ideas.
@@Beeeeeeeeeee Or you just take the cells out🙄
Hi Jeju, how did you connect this secondary pack to the vehicle as it's not recommended to connected to seperate battery packs of different size configuration chemistry in parallel or even series in an ev.
Can we get a picture of the MOSFETs on the BMS? Some how I'm doubting the you can string them in series like that... I mean, what's the maximum Gate-to-Source Voltage of the MOSFETs?
Wow, I wish I had a couple!
The shape looks like a scooter battery.
Regen charging is why
As far as balancing, is it just relying on each batterie’s BMS to eventually equalize everything out? I’d be worried at a certain point some packs would start getting down to 30v while others are fully charged. Need a 400v version to add range to a Ford E-Transit…
It looks there is a balance port inside but it is not hooked up!!
Jehu, I’m working on a VW beetle conversion. Can you confirm I’m thinking of this right? With a Hyper 9 HV motor rated at max 180v I would need 5 of these packs in a series and 13 in parallel to get about 30kwh? I believe my beetle will get about 4 miles per KWh so that leaves me with a range of about 120 miles. Does that sound right? How would you arrange these??
Specialized vado (electric bike)used the same board and layout as your r-5.. Very good cells.. Very good board etc..
I've been obsessed with this ever since I was a kid, but never had the direction to know what to study to master electrical circuits without killing myself lol
In your bus are you using the bms from the pack? If you use the BMS do you use the small leads to charge or go through the discharge bigger leads to charge? is there a separate charging circuit?
I’m going to try and use the same discharge port to charge, if I run into problem I’ll use the charging port
Hi ju .I have been watching your vids .great vids I see you have a lot more options. Hope you can help want a 72volt 20ah battery for my ebike on my down tube I can use 2 -36 inseries what do you recommend of your inventory...small and lightest as possible. .18or 19"down tube.thanks in advance.
Please show us a DIY version how to combine 2 of the Bluetti ac200p units together (like u can with AC300) I will buy more batteries and have more inverter capacity if I could combine my two ac200p solar generators.
How did I miss this video. I should do this for my 36 volt golf cart
Do you see any more motorized wheels in the pike?
Very cool. Wish there was a 48v option to work with a sol ark inverter
Take them apart and reconfigure is an option
I love the R5 packs Ive been waiting for yall to drop them for sale
Hey i have a question, where can i get those connectors for the batteries?
Looks like a great battery
Are btr lifepo4 batteries any good?
My 72v 20h and 30h don't seem to last very long and they're fairly new... less than 50 cycles...
Thanks
I’ve seen nothing but bad things about them. I’ve seen people open them up and figure out that it’s not actually lipo4 and they supply you with a lipo4 charger (very unsafe) and seen other people have them explode
@@jeremym9140 damn. I need to open one up. So far I've had 2 10 amp chargers fail and a 5 amp charger fail. Maybe they are different cells
These packs come from Bird scooter second or 3rd iteration
Man another banger video 🔋🔋🔋👑👑👑
Can these packs be used to build a solar generator like the ones you’ve done videos on in the past?
Yes
So, on an ebike, why not use a simple "Y" connector to run two batteries in parallel?
How do I put them in series?
On your battery pack shows charging and discharging from the same cable right?
Discharge cable is bidirectional.
Jehu could I add one of the popular 40 cell Panasonic packs to a pack with these and still have it function ok?
Jehu, these packs look identical to the Bird scooter battery packs that I've torn apart.
Now if you have to charge the heavy cables first, then the smaller cables, how do you do that on your bus?
You only have to do that the first time, after being dormant and not used for long period of time
@@jehugarcia I see, thanks.
i wanna buy the 2x untested r5 36V 13AH 460WH pack what do you think the chance is that both of then sont work like 50%of the time they don't work or what?
I'm just learning about battery packs for e-bikes I would like to make up my own packs, I like to make up 52 volt packs ideally to batteries for my e-bike I'm not clear what BMS to get I see something generic BMS's recently priced I don't know if this would be when you're better deals to split apart and makeup to 52 packs being seem to be good quality cells or if you have other options with more capacity and cheaper all in all I'm very cheap thanks for your time let me know if this will be the most logical and cheapest route or if there's another way to get quality sales a little more work the tear apart something
I cant really understand when you said the capacity of the 18650. Was it 1000mah per cell?
Would these packs work to create an add-on pack for a first generation Nissan Leaf?
Battery is battery. You can use these for anything you want, the question is how…. That I don’t know
@@jehugarcia thanks I have some research to do.
I want to build a power wall for my home what cells would be ideal and why not these
You can use these packs for DIY powerwall, even 20-cell packs. Check out Jehu's other video: czcams.com/video/m9POhmpwPjQ/video.html
You remind me of a Latin version of e.musk👍🏾✊🏽💯power on bro
What is the continous discharge rate? The website does not say.
czcams.com/video/Oa19xoyskmw/video.html
Jehu, how you will manage thermal management of the battery pack when using it in the VW Bus? What if overheating occurs?
They do not overheat at 1c load
@@jehugarcia Jehu could I add one of the popular 40 cell Panasonic packs to a pack with these and still have it function ok?
PS I just ordered a bunch of these R5s last night
I am building a scooter with a drag car slick I have a 24-volt Jazzy wheelchair motor wonder what you recommend for a battery for it if you can help please
I couldn’t recommend anything with the info you provided.
What specifically do you want, this is a jazzy gear reduction 120 RPM output shaft with a 17 tooth front sprocket driving a 42 tooth rear sprocket the rim and the tire weigh very little but making the tube chassis 120 thousand wall Tube the speed controller is a 24-volt 500w for a brushed motor the Jazzy motor is a brushed motor I need to be able to ride this at the racetrack while we are racing between the track in the pits
Jehu, Im thinking of buying one of these R5 batteries, does the "tested" version in the option list mean there are no bad cells?
Correct, tested working unit has no dead cells
look like bird scooter batteries from the model 590
What would you recommend on a battery and voltage for a E300 Scooter i am replacing batteries for and a controller for now. looking to upgrade the motor after i burn up the stock one.
I am working on razor scooter too. Most important part is a battery that fit in the tray. These are way too long.
@@josephau4623 I have been thinking about 3 hoverboard batteries. What are your thoughts?
@@JPSURF16 not sure it will fit 3. I see people use 2 for sure. I am getting the 36v R3 hoping the BMS will be a small one at the end. Then I can cut the battery down the middle and make it shorter and wider. Which will be the cheapest. And almost the same ah as 3 hoverboard batteries. Most of these scooter pack they are in 2 rolls of 20cells. But it will be too long to use in razor. But my plan is to change them to 4 rolls of 10. Then they will fit perfectly inside the tray. Also most hoverboard battery come with the cheapest cell and low capacity like 2500 or 2600ah per cell.
Did you decided on you replacement motor and controller yet? Maybe hold out on the battery until you decide. Because those 48v 1800w my1020 brushless motor and controller are cheap and a very popular up grade choice. Same amount of work as the 500-1000w brush motor. All larger motors require to drill new motor mount holes and remove kick stand. If direct replacement the 350w will be the biggest you can go.
I did a 36v over volt on with a 36v controller on the stock 24v motor. It go much faster about 18mph. It is for my 80# kid so the motor is not burning up. But if I am going to ride it for a long distance. I assume the motor will burn out. So keep that in mind.
I NEED these batteries lol
Ok, I could not find the battery chargers on your web site.
jag35.com/products/new-42v-1-7a-battery-charger-power-cable-genuine-xiaomi
did u ever build the ev battery with these?
Awesome
dear jehu is there a way to step down the voltage to run 12v appliances?
Yes amzn.to/3EhGztP
What about balancing?
Where can I buy these from? Am from Nigeria in Africa.
Those are from Bird Zero (Okai ES100)
jehu can u share the wiring on that battery in 20k version?
Which one?
I would like to get 100 of those-R5’s…
We have them
How can this be used in a DIY powerwall?
czcams.com/video/m9POhmpwPjQ/video.html
@@jehugarcia Interesting video... I've just finished cleaning 4000 18650 cells pink Samsung 26f and it`s variants at 2600mah, so there is different options to set them up in, I'm planning on 10 lots of 400 cells (not charged each of them yet so the individual rating of the cells is unknown at present) I've found cooling tubing for them so each module can be cooled, I'll use the replacement BMS as used in Tesla modules a tried and tested method.. with some luck I'll have a conversion by summer.... planning for 150 mile range in a conversion....
Could you do a video on building a backup power system for animals like snakes, lizards, fish for power outages?
I don’t know what these animals need that’s different than us Humans
Merry Christmas Sir
These are from a bird zero scooter. Panasonic BD cells 10s4p
Juhu can I run my Jetson bolt on 2 rechargeable 6 ah 12 v batteries wired for 24 v of power? I just subbed today bro n this ur world and all ur followers worlsis BRAND NEW TO ME N I LOVING IT!
Please show us how to charge projects like this with solar power.
Solar charge controller
A few vids ago, he charges the Samba with an Ecoflow Delta pro. You can plug your solar into that.
@@skepticfucker280 what size?
@@Lifesabeachmusicvideos size? I'm sorry but I don't understand "size" when talking about battery packs.... unless your asking about how big the batteries are.
Do you mean voltage?
They are 10s5p 36v/42v battery packs (if actually 15ah). A solar charger is what u connect your solar panels to. So, you want to get a 42v lithium solar charger if planing to use as a battery bank for solar charging.
Sry if my comment is hard to understand, I'm crazy drunk on my night off and not rechecking what I wrote but yeah.
Have a good night and hope I helped, if not Sry 4 wasting u time.
:)
@@skepticfucker280 Sorry I would like to know what size charge controller i would need for this product. czcams.com/video/8ifR0Fm_cOg/video.html
3.3 KWH OBX e bicycle bicycle battery toolbox.
Bring back the original Megalodongle with these generic XT connectors instead of the old silver pack special ones!
Hi can I buy the car?
Those "r5" batteries are from bird zero scooters.
I want to buy battery I'm in Nigeria how do how do I go about
I can sell you battery I just can’t ship it to you, you need to find someone that will import lithium battery into your country.
Can we convert petrol vehicle to ev hybrid vehicles?
can you build me one?
Hi morning how are you am texting because I want to buy Battery from your web site but don't know it please send it to me thanks.
Speech to text doesn't work so great sorry
where’s the EV?
Hey Jahu, I drove VW busses for many years ,, sell me a vehicle EV