F150 P0720 And P2106 Transmission Slipping
Vložit
- čas přidán 26. 02. 2023
- I think the transmission in my old truck is no good what do you think ?
www.princessauto.com/en/
Autel 906BT amzn.to/41hF7Eh
My old 2006 f150 has transmission issues the main codes are
P0720 is an OBD code related to the workings and overall condition of the output speed sensor circuit. The Powertrain Control Module (PCM) in this particular circuit works by gathering a signal from the output speed sensor to assess and input the right shift strategy to the car's transmission.
P2106 OBD-II trouble code is one of number of possible codes that indicates that the Powertrain Control Module (PCM) has detected a malfunction and is limiting the operation of the Throttle Actuator Control System
DISCLAIMER: Due to factors out of the control of BackCountry Wrenching and Bsk Garage, we cannot guarantee against improper use or unauthorized modifications of this information. BackCountry Wrenching and Bsk garage assumes no liability or responsibility for property damages or injury incurred as a result of any information contained in this video and all other videos produced by BackCounty Wrenching and Bsk Garage. Use this information at your own risk. BackCountry Wrenching and Bsk Garage recommends safe practices when working on vehicles and/or with tools seen in this video. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not BackCountry Wrenching and Bsk Garage Be safe! This video and description contain affiliate links, which means that if you click on one of the product links, we receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
#Autel #906BT - Auta a dopravní prostředky
This is why I don’t sell cars/sleds/atvs to family or friends. They buy them from you with a lifetime service callback whenever something is wrong.
I wasn’t asking for warranty or money back. Just looking for the answer he gave I value Jerry option very much
I know, it will be interesting to see how this problem shakes out. Watching this channel has taught me not to get the parts cannon out and actually test to verify before buying.
@@scha0786 replacing the sensor was about all I could do. I was hoping for the quick fix. It’s been a fantastic truck. No regrets.
@@CaptCalgary Was there a follow up? Mine just left me stranded. Limped 17mph home.
I just changed the tranny fluid in my Chevy almost at 100K miles. The stuff coming our looked real good, bright red and no smell. Good luck to Trevor with your old Ford!
I just had my 2010 f150 trany bulk head connector and pump seal fixed for leaks. Your correct on low fluid , very sensitive . I'm thinking vermin got to the harness.
I think it was a good idea to get rid of that truck when you did.😁👍👍
Trevor drives them until the wheels fall off!! Lol
I need to find someone like you that has a good scanner and knows how to use it. Just changed transmission 4R75E and got all kinds of codes affecting how engine runs. It's been in a shop but wasted my money, still runs like crap and has numerous codes.
Had an 05 with similar problems..... among others (traded it for some work I needed done). Whatup kitty kat
Got a transmission problem slipping not going into 3rd/4th gears in my 2008 Ford E350 van with 182,000 miles. I believe it’s the same transmission the 4R75E. Your probably right it’s probably the clutch packs burned up. I’m going to drop the valve body in mine and check the check balls and the solenoids. I understand there’s a snap ring that had a tendency to break preventing the solenoid from engaging. Those check balls are rubber they wear out split sometimes etc. Remember blowing your tranny has a whole different meaning to a mechanic.
The truck was faithful to you cause you looked after it. The truck now looks a little neglected!
It sure did made me a bit sad that’s for sure
My old 2007 5.4 has 340k kilometers on it. Transmission still shifts like a dream. Was that one ever serviced? I chalk mine lasting this long to religious transmission maintenance.
Hahaha when you popped the hood and every fluid was low. I smacked my own head.
That was my reaction as well
I'd drop the transmission pan next to see if the burnt clutch theory is true and cut open the filter. Maybe even test a solenoid or two while the valve body is staring me in the face.😉 Next step, drive it to the junkyard. 😜
Great point!
Not throwing shade just pointing out based on other fluid levels, probably ran too low on fluid too long burning up the clutches. I toasted a transmission on a Mazda 3, cooler line developed a leak on the way home, got home, trans didn't make it though. Was a great truck despite being a 5.4 throw away truck.
I totally agree with you, the stench of transmission fluid was over powering
Trevor is the same guy that has(or had) the Tupperware Jeep right? If so, I'm not surprised that poor truck is half in the grave! LOL...
Fedor is the one with Tupperware Jeep
@@BackCountryWrenching I knew I was getting them mixed up! MFBT!
Another informational video, my friend to say the least, the old girl must be tired and worn out at least the transmission. Seems like it may be time to put a few dollars out of the pocket and replace the old girls transmission so that she can persevere once again.
She’s gone now as he sold it
Where is the follow up? I have the same issue on a 2005. I changed out the OSS. Didn't help. Nice red fluid and lo leaks. Did you ever get back to this? I looked for new videos.
he ended up just selling the truck instead of getting it fixed
thats how im looking at mine.. dam.. i got 1o years out of the truck and at the time i dont know what i would have doe if i didnt have it.. then i go and blow it up by putting too much fluid in it when it looked bone dry.. now it doesnt move.. needs a rebuild 6 years after i got a rebuild.. thats a long time though? should i have been doing trans fluid changes in that time? thats what made me need a rebuild the first time.. i changed the fluid and it quit working.. am i supposed to change the fluid or dont change the fluid? im so sick of this truck and all the expensive repairs.. i never wanted it in the first place.. thing needs a new engine.. now trans rebuild.. gtfo... its 218000, thing is done.. its totalled.. no point in doing the repairs.. its needs a whole powertrain rebuild every few years? no way..
Seeing I'm watching this video, wish had someone to pull my f150 home. 15 miles at 17-25 mgh, and reverse up a slope. Ya Reverse worked.
I can't find a follow up?
There isn’t one he decided to sell the truck instead of fixing it
I don’t think the hood has been up since last time you raised it.
😂🤣🤣😂 I wondered that too
This Truck was Manuel ? Cluch pack right?
no automatic, they have wet clutches
@@BackCountryWrenching oh okay im having the same problem with my Ford f150 4.6l 2004 automatic thanks for the video helped alot
That's what neglect gets you
Lol she's so fuzzy now
A big floof ball now
That guy destroyed that truck!
Yeah he sure did, I had it for 10 years and it ran awesome