My All Time Favorite 3D Printer... Ever, The Bambu Labs X1 Carbon Review
Vložit
- čas přidán 28. 05. 2024
- This is my review of the Carbon X1 from Bambu Labs. My #1 all time pick for the best 3d printer. I have worked with $100 to $100,000 3d printers and this is my best pick. The best thing I could recommend to anyone in almost every situation. Compared to the AnkerMake M5 or M5C this is miles ahead in terms of print quality and performance.
#x1carbon #bambulab #BambulabGlobal #BambuLab #Bambu #bambulabX1C
================== [Second Channel] ==================
Make sure to subscribe to the dedicated review channel for cool tech products: / @thereviewvault
================== [Minecraft Server] ==================
I have my own Minecraft server that I host, and play on frequently.
Public Minecraft Server (Java and Bedrock) IP: avn.gg
Bedrock Port:19132
Java Port: 25565
Minecraft Server Discord Server: / discord
================== [Attributions] ======================
Producer: Jay Avenian
Editor: SpyMasterJimmy
=================== [Donations] ======================
Want to donate hardware to make future videos better? Mail in hardware which I use in a wide range of content, everything from viewer made PCs to doing stupid stuff with hardware. I recycle responsibly and try to find good homes for the stuff I receive.
Mail To:
Please email me at jaystechvault@gmail.com to get my mailing address if you want to send in hardware.
Want to donate Crypto?
================== [Discord Server] ===================
I have a dedicated Discord server for my CZcams channel, to discuss everything from hardware to video suggestions.
Official CZcams Channel Discord Server: / discord
=================== [Sponsors] =======================
Interested in sponsoring a video? I welcome all kinds of sponsorships but please keep them tech & computer related. I love reviewing products so drop me an email at jaystechvault@gmail.com and we can get in touch.
bambu lab x1 carbon bambu lab x1 carbon review bambu x1 carbon bambu lab x1 carbon bambu labs x1 carbon bambu lab x1 bambu lab x1 carbon kickstarter bambu labs bambu lab ams bambu lab p1p bambu lab 3d printer x1 carbon review x1. carbon 3d printer review bambu labs x1 carbon review bambu bambu labs x1 bambu lab x1 carbon setup bambu lab x1 carbon long term review bambu lab x1 carbon 3d printer bambu lab x1 series. bambulab x1 carbon ankermake m5 ankermake m5 review ankermake m5 3d printer ankermake m5 3d printer review ankermake ankermake m5 setup. ankermake m5 test ankermake 3d printer ankermake m5 speed anker make m5 ankermake m5 assembly ankermake m5 unboxing ankermake. m5 slicer ankermake m5 vs bambu x1 bed levelling issue ankermake m5 ankermake m5c m5 3d printer ankermake review auto bed levelling issue. ankermake m5 bed levelling ankermakr m5 anker m5 ankermake m5 deutsch. - Věda a technologie
They actually recommend the glue stick on the bed to weaken the adhesion because its just a foil that sticks to the actual sheet / bed. Sometimes pla lr tpu sticks way too good and if you try to remove it you could damage the foil or create air bubbles underneath. Also they do sell pei beds like on the anker and they work pretty good but it doesn‘t work with the lidar / first layer detection (yet). But you can still use the calibration for the filament on the cool plate and then switch to the pei plate afterwards.
I’m 3D printing a CF submersible.
Nice. My favorite is The Prusa MK4 with enclosure.. Two of the best 💯
I agree with you. I love my X1 Carbon and think it is the best FDM printer out there
Cool vid
Does the bambo labs X1 allow you to use 3d party PLA or material or are you grandfathered into the bambo labs filament.
You can use any filament
The filament run-out sensor is definitely not in the nozzle. The nozzle is the part that melts the plastic. I guess, you are referring to the extruders.
he is just dumb
not sure what you're talking about with the x1c, it's LOUD! I've cut some of it down by turning the fans down a little bit. But it just makes a lot of noise. I'm really hoping the announcement on the 20th fixes this like they said. I just hope it stays core x y and not going back to the bed slinger like I'm hearing rumors of. As far as bed adhesion, the cold sheet SUCKS... after I replaced it with a PEI, things are great!
Has anything changed since?
Yes after the firmware updates, I still had to tweak the fans but now it's super quiet, no problems at all.@@SangheiliSpecOp
@@97JoMiller Thank you for the info and for getting back to me!
I owned an M5C for a while but my research slowly opened my eyes to how much more advanced Bambu Lab was. I had no problems with the m5c and honestly it would make for a decent backup printer, but I did return it and just ordered an A1 + Ams combo yesterday. I have also done extensive research on the Bambu Lab core xy printers and decided that the X1C is worth the money, just saving up for it at the moment and doing more research. The sound of the printer wouldn't bother me too much if its within reason, so I'm trying to gauge how bad it is and from the vids i've seen, it seems to be tolerable. I appreciate your input!
it's quiet now. I run it while on conference calls for work and don't even really notice it anymore... before it was annoying, now no biggie.@@SangheiliSpecOp
I've been wanting to get this printer. the printer is a little too pricey for me though
Then what about the p1p or p1s?
Dude I 100% agree it’s really expensive. I’ve bought only 1 $1000 printer ever: the Creality CR-10 max and that was dog water. This is at least worth the price. And also this is not for everyone, not for novices for sure.
And please do not have this as your first printer, a cheap printer is a good way to get familiar.
@@Samuel-ef4fn I can't even get those ones lol. I just stick to my ender 3.
@@swordshattered7822 the elegoo neptune series is also pretty good for a relatively low budget. :)
Ps: i also had an ender 3 and it absolutely hated my whole existence, it never wanted to work like it should. xd
I thought all these glowing reviews of Bambu were paid shills. Got an A1 combo 3 weeks before Christmas, loved the little bed slinger I think the best printer I've ever owned. The A1 recall happened, got a full refund and bought the X1C with AMS. Fast turning into one of those shills now and I paid full price for each and every one of those printers.
Now AnkerMake on the other hand.
Fun fact. Bambu labs review contract just requires us to give feedback on the printer. We don’t even have to make a video. (Yet we obviously do)
AnkerMake manually scans through and reviews the videos. I had to fight to have *any* comparison with other printers.
What's funny is there are things I still miss about the A1. The nozzle changes were so easy on the A1, sounds gimicky but I like the tune you could play on the servo motors, I made custom songs and made a Minion extruder cover that they eye went around as it extruded filament. ;-) @@JaysTechVault
yo the drop box is full