Hello. I bought an Yume M11 electric scooter. The scooter came with the rear light broken (the red diffuser ) and because was mounted on the rear fender after a while broke completely. Yume sent me a replacement but now I have no brake light. I changed the connectors between them and the led's are working either 2 either 3 from 5 total which 3 I presume should be for the brake light. I understood that the controller has a low and a high brake wire. Is the high 12V? I will mount a separate brake light but I see other connectors with only 1 wire. It means the wire is only +? If yes which one. And the ground is common with other ground wire? Please help me. [Smile]
I'm guessing that controller has. The features for brake light and the brake cut off at the same time. And power wires for the lights. When you got a KT 48v controller. what doesn't have them options. Just (1)LCD display wires (2)Brake cut off (3) pedal assist (4) Throttle (5) Hall sensor & 3 Y.B.G wires. (6) red black power wires. I still managed to wire my ebike up. with front light & horn & back light & brake light with power cut off all. Working at the same time. And twist throttle ignition switch with voltage display. The trick was I used a relay for brake switches. At that time i couldn't find any information on the internet to help me.... I'm not that good at electrics. There's probably a much easier way LOL
Can you make another video showing how to connect every thing to a electric bike. I like the video but I don’t see how to connect every thing to my electric-x-p 2.0 that just arrived a week ago. Thanks
Can you make a new video on how to Connect
Does it use same e brake goes to the controller for rear brake light can u explain pls
Hello. Do you make custom lighting.?
Hello. I bought an Yume M11 electric scooter. The scooter came with the rear light broken (the red diffuser ) and because was mounted on the rear fender after a while broke completely. Yume sent me a replacement but now I have no brake light. I changed the connectors between them and the led's are working either 2 either 3 from 5 total which 3 I presume should be for the brake light. I understood that the controller has a low and a high brake wire. Is the high 12V? I will mount a separate brake light but I see other connectors with only 1 wire. It means the wire is only +? If yes which one. And the ground is common with other ground wire? Please help me. [Smile]
I'm guessing that controller has.
The features for brake light and the brake cut off at the same time.
And power wires for the lights.
When you got a KT 48v controller.
what doesn't have them options.
Just
(1)LCD display wires
(2)Brake cut off
(3) pedal assist
(4) Throttle
(5) Hall sensor & 3 Y.B.G wires.
(6) red black power wires.
I still managed to wire my ebike up.
with front light & horn & back light & brake light with power cut off all. Working at the same time.
And twist throttle ignition switch with voltage display.
The trick was I used a relay for brake switches.
At that time i couldn't find any information on the internet to help me....
I'm not that good at electrics.
There's probably a much easier way LOL
Hi. can i ask. how did you wire up the relay for brake switches please.
Can I do this with any controller
I have this exact setup. But it's stopped working and I don't know where the fuse is.
It's located in the fuse box 😬😠
My brake light is always on, why?
It’s working on scooter?
Wire diagram plsssss....
Can you make another video showing how to connect every thing to a electric bike. I like the video but I don’t see how to connect every thing to my electric-x-p 2.0 that just arrived a week ago. Thanks
I installed it in my lectric xp, works fine
How many watts the tail?
It is 1.5W
Only for 24-72V
Are they both 1.5w
Or 1.5w for each ?
In total 3w
Or 1.5w ?
Thanks
Front light is 12W, horn is 2.1W, rear light is 1.5W.
Front Light Specification:
1. Weight: 100g
2. Case Material: ABS
3. Voltage Range: 12V-80V
4. Current and Power: 0.35A/12W
5. Lamp Flux: 180-220LM
6. Horn Current and Power: 44mA/2.1W
7. Horn Volume: 80-100dB
8. Cable: Red-Horn+, Black-GND, Green-Lamp+
9. Waterproof Grade: IP54
10. CQC Certificate: CQC19134228086
11. Size: 62*50*73mm
12. Cable Length: About 1.5M
I think you forgot to tell people how you got everything hooked up prior to your test... ?????????????????
what is your song calded
It's called a waste of time
Please make more bad videos with loud stupid music
God shut that annoying noise off
Annoying sound and useless demonstration. You didn't even show the wiring diagram.